[Mon Jul 16 18:09:58 2012] Detection parameters:
  Position = (277.8, 327.0) = 20 57 22.52 31 3 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 250.5 +/- 24.2
  Background counts = 54.1
  Rate = 0.04 +/- 0.004

[Mon Jul 16 18:10:00 2012] Off-axis axis estimate = 2.56'
[Tue Jul 17 07:00:05 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 07:00:05 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Tue Jul 17 07:00:05 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.969
[Tue Jul 17 07:00:05 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.71"
[Tue Jul 17 13:29:11 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src28.ximg exists
[Tue Jul 17 13:29:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src28.csv
[Tue Jul 17 13:29:11 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue Jul 17 13:29:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src28.csv
[Tue Jul 17 13:29:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:29:15 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue Jul 17 13:29:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Tue Jul 17 13:29:15 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue Jul 17 13:29:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Tue Jul 17 13:29:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:31:02 2012] Warning, spatial fit 28 centroid is now closest to src. 8
[Tue Jul 17 13:31:02 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:31:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:31:02 2012] Assessing source extent using major
[Tue Jul 17 13:31:02 2012] Source does appear to be extended
[Tue Jul 17 13:31:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:31:03 2012] Source is confused with source 8
[Wed Jul 18 02:32:51 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 02:32:51 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Wed Jul 18 02:32:51 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.969
[Wed Jul 18 02:32:51 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 7.71"
[Wed Jul 18 08:18:48 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src20.ximg exists
[Wed Jul 18 08:18:48 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed Jul 18 08:18:48 2012] Fit fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src20 appears to have run properly
[Wed Jul 18 08:18:51 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed Jul 18 08:18:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed Jul 18 08:18:51 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Jul 18 08:18:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed Jul 18 08:18:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:20:05 2012] Warning, spatial fit 20 centroid is now closest to src. 8
[Wed Jul 18 08:20:05 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 140 at 12.210319 pixels away
[Wed Jul 18 08:20:05 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:20:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:20:05 2012] Assessing source extent using major
[Wed Jul 18 08:20:05 2012] Source does appear to be extended
[Wed Jul 18 08:20:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 16:12:37 2012] XMMSAS src. selection expression = ellipse(24117.443909, 28402.889526, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 16:12:37 2012] Writing source region out to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src140_src.reg
[Wed Jul 18 16:12:37 2012] Extracting stamp from image fullrun_mos2_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (240, 290) - (315, 365)
[Wed Jul 18 16:12:37 2012] XMMSAS bgd. selection expression = annulus(24117.443909, 28402.889526, 1087.500000, 2175.000000, X, Y) && !ellipse(26061.832000, 29236.148000, 855.312025, 855.312025, 0.000000, X, Y) && !ellipse(23990.948702, 27870.906000, 1218.120035, 1218.120035, 0.000000, X, Y) && !ellipse(25566.824000, 27507.664000, 702.456020, 702.456020, 0.000000, X, Y) && !ellipse(24672.666290, 26313.421295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.527496, 28568.481049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24244.327759, 28921.063629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24980.628000, 29986.820000, 528.050415, 528.050415, 0.000000, X, Y) && !ellipse(26327.442505, 28573.618530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25201.779114, 28918.270538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25016.479800, 26395.783400, 1087.376031, 1087.376031, 0.000000, X, Y) && !ellipse(24086.701324, 26763.023956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26863.761078, 28928.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25817.496338, 29786.271301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26461.601135, 30300.847839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25966.183289, 26566.326111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25061.932000, 29985.688000, 1165.280034, 1165.280034, 0.000000, X, Y) && !ellipse(25884.673889, 30477.224091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24001.520020, 26136.272430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26878.472595, 30450.822479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.072083, 30775.142273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23662.558000, 30202.064000, 1297.880037, 1297.880037, 0.000000, X, Y) && !ellipse(23955.240204, 30656.765137, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 16:12:37 2012] Writing fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src140.gif
[Wed Jul 18 16:17:06 2012] Mean detx,y = (-893.74, -3838.99) 
[Wed Jul 18 16:17:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 16:17:15 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 16:17:15 2012] Setting source spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src140_src_b10.pi.gz
[Wed Jul 18 16:17:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src140_bgd.pi.gz
[Wed Jul 18 17:24:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 17:24:53 2012] rmf not generated due to insufficient counts
[Wed Jul 18 18:35:48 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:48 2012] Error reading totcts from fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src140_src_b10.pi.gz
[Wed Jul 18 18:35:50 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:50 2012] Using photon index=1.80, rate=0.0375, arf fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src140.arf
[Wed Jul 18 18:35:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:50 2012] Updating source flux to 3.9e-13
[Wed Jul 18 18:46:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting