[Mon Jul 16 18:09:55 2012] Detection parameters:
  Position = (345.4, 208.2) = 20 56 59.67 30 54 45.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 270.5 +/- 22.7
  Background counts = 121.2
  Rate = 0.04 +/- 0.003

[Mon Jul 16 18:10:00 2012] Off-axis axis estimate = 7.37'
[Tue Jul 17 07:00:05 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 07:00:05 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Tue Jul 17 07:00:05 2012] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.720
[Tue Jul 17 07:00:05 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 10.12"
[Tue Jul 17 13:29:12 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src33.ximg exists
[Tue Jul 17 13:29:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src33.csv
[Tue Jul 17 13:29:12 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Jul 17 13:29:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src33.csv
[Tue Jul 17 13:29:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:29:15 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Jul 17 13:29:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src33.csv
[Tue Jul 17 13:29:15 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Jul 17 13:29:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src33.csv
[Tue Jul 17 13:29:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:31:02 2012] Spatial fit model total counts = 2363.650000, observed total counts = 1846.000000
[Tue Jul 17 13:31:02 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 13:31:02 2012] Spatial fit model total counts = 1332.030000, observed total counts = 1376.000000
[Tue Jul 17 13:31:02 2012] Offset between fit and detection position for source 12 = 1.204103 pixels
[Tue Jul 17 13:31:02 2012] Warning, changing simple spatial fit ID from 33 to 95
[Tue Jul 17 13:31:02 2012] 1296.325400 total counts/ 1277.520000 bgd. counts: snr = 0.526137
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.204103 pixels
  Position = (346.4, 208.8) = 20 56 59.30 30 54 48.3
  Extent = 2.6" x 2.6", rotation angle = 0
  Source counts = 18.8 +/- 36.0
  Background counts = 1277.5
  Rate = 0.003 +/- 0.005
  Deleting source due to low Poisson probability