[Mon Jul 16 18:09:57 2012] Detection parameters:
  Position = (304.9, 364.9) = 20 57 13.35 31 6 4.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.5 +/- 21.9
  Background counts = 124.6
  Rate = 0.03 +/- 0.004

[Mon Jul 16 18:10:00 2012] Off-axis axis estimate = 4.84'
[Tue Jul 17 07:00:05 2012] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 07:00:05 2012] Initial guess for spatial extent in simple fitting = 8.85"
[Tue Jul 17 07:00:05 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.973
[Tue Jul 17 07:00:05 2012] Giving source the simple spatial ID 82 for pass 0, mean size = 8.85"
[Tue Jul 17 13:29:13 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src82.ximg exists
[Tue Jul 17 13:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src82.csv
[Tue Jul 17 13:29:13 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src82_1.ximg exists
[Tue Jul 17 13:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src82.csv
[Tue Jul 17 13:29:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:29:19 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Tue Jul 17 13:29:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src82.csv
[Tue Jul 17 13:29:19 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Tue Jul 17 13:29:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src82.csv
[Tue Jul 17 13:29:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:31:02 2012] Source 104 is offset by -1.269415 and 7.058142 pixels which is larger than
2 X fitted extent = 1.016129 x 1.016129, not incorporating fit results
[Tue Jul 17 13:31:02 2012] Warning, spatial fit 82 centroid is now closest to src. 110
[Tue Jul 17 13:31:03 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:31:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:31:03 2012] Assessing source extent using major
[Tue Jul 17 13:31:03 2012] Source does appear to be extended
[Tue Jul 17 13:31:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:31:03 2012] Source is confused with source 110
[Wed Jul 18 02:32:51 2012] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 02:32:51 2012] Initial guess for spatial extent in simple fitting = 8.85"
[Wed Jul 18 02:32:51 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.973
[Wed Jul 18 02:32:51 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 8.85"
[Wed Jul 18 08:18:49 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src64.ximg exists
[Wed Jul 18 08:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src64.csv
[Wed Jul 18 08:18:49 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src64_1.ximg exists
[Wed Jul 18 08:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src64.csv
[Wed Jul 18 08:18:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:18:53 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Wed Jul 18 08:18:53 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Wed Jul 18 08:18:53 2012] Fit fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly
[Wed Jul 18 08:20:05 2012] Source 104 is offset by -0.799530 and 5.269958 pixels which is larger than
2 X fitted extent = 0.957393 x 0.957393, not incorporating fit results
[Wed Jul 18 08:20:05 2012] Warning, spatial fit 64 centroid is now closest to src. 101
[Wed Jul 18 08:20:05 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:20:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:20:05 2012] Assessing source extent using major
[Wed Jul 18 08:20:05 2012] Source does appear to be extended
[Wed Jul 18 08:20:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 16:12:40 2012] XMMSAS src. selection expression = ellipse(26474.286865, 31700.332367, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 16:12:40 2012] Writing source region out to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src104_src.reg
[Wed Jul 18 16:12:40 2012] Extracting stamp from image fullrun_mos2_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (267, 327) - (342, 402)
[Wed Jul 18 16:12:40 2012] XMMSAS bgd. selection expression = annulus(26474.286865, 31700.332367, 1087.500000, 2175.000000, X, Y) && !ellipse(26061.832000, 29236.148000, 855.312025, 855.312025, 0.000000, X, Y) && !ellipse(24244.327759, 28921.063629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24980.628000, 29986.820000, 528.050415, 528.050415, 0.000000, X, Y) && !ellipse(25201.779114, 28918.270538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26023.744324, 32752.974487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26863.761078, 28928.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25817.496338, 29786.271301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26461.601135, 30300.847839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24310.536224, 32899.805573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25935.284058, 31703.672394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25061.932000, 29985.688000, 1165.280034, 1165.280034, 0.000000, X, Y) && !ellipse(24642.024597, 31612.804016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24287.404000, 32673.397000, 1482.768043, 1482.768043, 0.000000, X, Y) && !ellipse(25884.673889, 30477.224091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27557.214905, 33359.088470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27854.729523, 31718.845886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.046326, 33437.637512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27956.733093, 33696.202850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28725.704000, 33495.762000, 1562.544045, 1562.544045, 0.000000, X, Y) && !ellipse(26878.472595, 30450.822479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27663.697510, 34495.921570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25214.044000, 34790.187200, 1218.776035, 1218.776035, 0.000000, X, Y) && !ellipse(27488.069977, 30228.530151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25440.625549, 32691.834473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.072083, 30775.142273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.292000, 33080.218000, 1549.096045, 1466.256042, 100.939000, X, Y) && !ellipse(24665.104000, 32536.648000, 1506.328043, 754.418422, 6.667000, X, Y) && !ellipse(26901.287262, 34477.256714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25035.278600, 33798.468000, 1514.320044, 1514.320044, 0.000000, X, Y) && !ellipse(23982.542000, 34199.304000, 2945.640085, 2945.640085, 0.000000, X, Y) && !ellipse(24615.219421, 34579.387726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26374.431213, 33259.570007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26130.553497, 33638.315247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25596.512939, 33716.824463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23662.558000, 30202.064000, 1297.880037, 1297.880037, 0.000000, X, Y) && !ellipse(28095.440000, 31802.156780, 1436.488041, 1436.488041, 0.000000, X, Y) && !ellipse(25286.917938, 31977.870544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27923.208400, 32770.760000, 1381.648040, 1381.648040, 0.000000, X, Y) && !ellipse(29115.507355, 33071.816956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23789.598236, 32751.344299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23955.240204, 30656.765137, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 16:12:40 2012] Writing fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src104.gif
[Wed Jul 18 16:30:16 2012] Mean detx,y = (941.26, -7445.08) 
[Wed Jul 18 16:30:17 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 16:30:29 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 16:30:29 2012] Setting source spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Wed Jul 18 16:30:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src104_bgd.pi.gz
[Wed Jul 18 17:52:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 17:52:01 2012] rmf not generated due to insufficient counts
[Wed Jul 18 18:35:49 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:49 2012] Error reading totcts from fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Wed Jul 18 18:35:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:51 2012] Using photon index=1.80, rate=0.0254, arf fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src104.arf
[Wed Jul 18 18:35:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:51 2012] Updating source flux to 3.4e-13
[Wed Jul 18 18:46:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting