[Mon Jul 16 18:09:55 2012] Detection parameters:
  Position = (284.0, 286.9) = 20 57 20.40 31 0 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 979.1 +/- 43.1
  Background counts = 76.9
  Rate = 0.1 +/- 0.006

[Mon Jul 16 18:10:00 2012] Off-axis axis estimate = 1.34'
[Tue Jul 17 07:00:05 2012] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 07:00:05 2012] Initial guess for spatial extent in simple fitting = 7.10"
[Tue Jul 17 07:00:05 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.880
[Tue Jul 17 07:00:05 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.10"
[Tue Jul 17 13:29:11 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul 17 13:29:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src1.csv
[Tue Jul 17 13:29:11 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul 17 13:29:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src1.csv
[Tue Jul 17 13:29:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:29:14 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 17 13:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jul 17 13:29:14 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 17 13:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jul 17 13:29:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:31:02 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Tue Jul 17 13:31:02 2012] Spatial fit model total counts = 4495.870000, observed total counts = 4496.000000
[Tue Jul 17 13:31:02 2012] Offset between fit and detection position for source 1 = 2.065021 pixels
[Tue Jul 17 13:31:02 2012] Warning, changing simple spatial fit ID from 1 to 2
[Tue Jul 17 13:31:02 2012] 4489.255000 total counts/ 4012.440000 bgd. counts: snr = 7.527411
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.065021 pixels
  Position = (286.1, 287.0) = 20 57 19.71 31 0 28.9
  Extent = 13.7 (13.6-27.4)", rotation angle = 0
  Source counts = 476.8 +/- 67.0
  Background counts = 4012.4
  Rate = 0.07 +/- 0.009
[Tue Jul 17 13:31:02 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:31:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:31:02 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 13:31:02 2012] Source does appear to be extended
[Tue Jul 17 13:31:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:31:03 2012] Source is confused with source 2
[Wed Jul 18 02:32:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 18 02:32:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 18 02:32:51 2012] Initial guess for spatial extent in simple fitting = 13.69"
[Wed Jul 18 02:32:51 2012] source mask rpix=3.1, npix_max = 53, mask sum = 64, frac = 1.203
[Wed Jul 18 02:32:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.69"
[Wed Jul 18 08:18:47 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 18 08:18:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src1.csv
[Wed Jul 18 08:18:47 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 18 08:18:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src1.csv
[Wed Jul 18 08:18:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:18:51 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 18 08:18:51 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 18 08:18:51 2012] Fit fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 18 08:20:04 2012] Warning, spatial fit 1 centroid is now closest to src. 179
[Wed Jul 18 08:20:04 2012] Spatial fit model total counts = 4492.760000, observed total counts = 4496.000000
[Wed Jul 18 08:20:04 2012] Offset between fit and detection position for source 1 = 0.185481 pixels
[Wed Jul 18 08:20:04 2012] Warning, changing simple spatial fit ID from 1 to 2
[Wed Jul 18 08:20:04 2012] 4498.671000 total counts/ 3968.450000 bgd. counts: snr = 8.416790
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.185481 pixels
  Position = (286.0, 286.9) = 20 57 19.75 31 0 28.3
  Extent = 13.7 (13.6-27.4)", rotation angle = 0
  Source counts = 530.2 +/- 67.1
  Background counts = 3968.4
  Rate = 0.07 +/- 0.009
[Wed Jul 18 08:20:05 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:20:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:20:05 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 08:20:05 2012] Source does appear to be extended
[Wed Jul 18 08:20:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 16:12:35 2012] XMMSAS src. selection expression = ellipse(24830.786000, 24911.924000, 821.316024, 821.316024, 0.000000, X, Y)
[Wed Jul 18 16:12:36 2012] Writing source region out to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 18 16:12:36 2012] Extracting stamp from image fullrun_mos2_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (239, 240) - (333, 334)
[Wed Jul 18 16:12:36 2012] XMMSAS bgd. selection expression = annulus(24830.786000, 24911.924000, 1368.860039, 2737.720079, X, Y) && !ellipse(25350.991760, 25092.792816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23990.948702, 27870.906000, 1218.120035, 1218.120035, 0.000000, X, Y) && !ellipse(25566.824000, 27507.664000, 702.456020, 702.456020, 0.000000, X, Y) && !ellipse(24672.666290, 26313.421295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25016.479800, 26395.783400, 1087.376031, 1087.376031, 0.000000, X, Y) && !ellipse(24117.443909, 28402.889526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24086.701324, 26763.023956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25966.183289, 26566.326111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24001.520020, 26136.272430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25287.650726, 23722.006500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23893.096588, 25253.411469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25847.660126, 21595.130234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26746.430023, 24323.429047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24398.730988, 23534.550812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27577.979889, 28397.152008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23772.144073, 24534.644592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25911.102051, 22276.335083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26571.562000, 23096.006600, 1726.512050, 583.637617, 90.000000, X, Y) && !ellipse(25449.565033, 22930.640503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25176.120911, 22393.814819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23658.997345, 23586.990295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24848.694733, 21883.787674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24035.445984, 21358.362686, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 16:12:36 2012] Writing fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src1.gif
[Wed Jul 18 16:12:50 2012] Mean detx,y = (289.40, -485.40) 
[Wed Jul 18 16:12:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 16:12:58 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 16:12:58 2012] Setting source spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 18 16:12:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 18 18:35:48 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:48 2012] Error reading totcts from fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 18 18:35:50 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:50 2012] Using photon index=1.80, rate=0.0725, arf fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src1.arf
[Wed Jul 18 18:35:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:50 2012] Updating source flux to 7.5e-13
[Wed Jul 18 18:46:07 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Jul 18 18:52:40 2012] Reading fit data from xmm0018140301/analysis//spectral/fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul 18 18:52:40 2012] Spectral fit parameter nH value = 6.99382e+20
[Wed Jul 18 18:52:40 2012] Spectral fit parameter PhoIndex value = 6.2089
[Wed Jul 18 18:52:40 2012] Failed to get F(0.3-8.0) from xmm0018140301/analysis//spectral/fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul 18 18:52:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:52:40 2012] Using Nh = 7e+20, photon index=6.21, rate=0.0725, arf fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src1.arf
[Wed Jul 18 18:52:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:52:40 2012] Updating source flux to 5.9e-13