[Mon Jul 16 18:08:35 2012] Detection parameters:
  Position = (273.3, 399.8) = 20 57 24.06 31 8 39.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.7 +/- 19.4
  Background counts = 119.0
  Rate = 0.02 +/- 0.005

[Mon Jul 16 18:08:38 2012] Off-axis axis estimate = 7.57'
[Tue Jul 17 00:54:11 2012] Using EEF radius (= 10.21 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 00:54:11 2012] Initial guess for spatial extent in simple fitting = 10.21"
[Tue Jul 17 00:54:11 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.110
[Tue Jul 17 00:54:11 2012] Giving source the simple spatial ID 82 for pass 0, mean size = 10.21"
[Tue Jul 17 07:00:02 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src82.ximg exists
[Tue Jul 17 07:00:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src82.csv
[Tue Jul 17 07:00:02 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src82_1.ximg exists
[Tue Jul 17 07:00:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src82.csv
[Tue Jul 17 07:00:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 07:00:05 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Tue Jul 17 07:00:05 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Tue Jul 17 07:00:05 2012] Fit fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src82 appears to have run properly
[Tue Jul 17 13:30:32 2012] Warning, spatial fit 82 centroid is now closest to src. 33
[Tue Jul 17 13:30:32 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:30:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:30:32 2012] Assessing source extent using major
[Tue Jul 17 13:30:32 2012] Source does appear to be extended
[Tue Jul 17 13:30:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:30:32 2012] Source is confused with source 33
[Tue Jul 17 20:30:29 2012] Using EEF radius (= 10.21 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 20:30:29 2012] Initial guess for spatial extent in simple fitting = 10.21"
[Tue Jul 17 20:30:29 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.110
[Tue Jul 17 20:30:29 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 10.21"
[Wed Jul 18 02:32:47 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src65.ximg exists
[Wed Jul 18 02:32:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src65.csv
[Wed Jul 18 02:32:48 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src65_1.ximg exists
[Wed Jul 18 02:32:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src65.csv
[Wed Jul 18 02:32:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 02:32:50 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Wed Jul 18 02:32:50 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Wed Jul 18 02:32:50 2012] Fit fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Wed Jul 18 08:19:43 2012] Warning, spatial fit 65 centroid is now closest to src. 33
[Wed Jul 18 08:19:43 2012] Source 37 is offset by -4.754317 and 4.343197 pixels which is larger than
2 X fitted extent = 1.479126 x 1.479126, not incorporating fit results
[Wed Jul 18 08:19:43 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:19:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:19:43 2012] Assessing source extent using major
[Wed Jul 18 08:19:43 2012] Source does appear to be extended
[Wed Jul 18 08:19:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 10:26:54 2012] XMMSAS src. selection expression = ellipse(23724.916412, 34730.942108, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 10:26:54 2012] Writing source region out to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src37_src.reg
[Wed Jul 18 10:26:54 2012] Extracting stamp from image fullrun_mos1_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (236, 362) - (311, 437)
[Wed Jul 18 10:26:54 2012] XMMSAS bgd. selection expression = annulus(23724.916412, 34730.942108, 1087.500000, 2175.000000, X, Y) && !ellipse(20831.892944, 34151.473999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25236.124000, 35025.218000, 1053.464030, 1053.464030, 0.000000, X, Y) && !ellipse(25382.427307, 35531.627258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24290.899200, 34776.790200, 1611.352046, 501.448014, 90.000000, X, Y) && !ellipse(26576.582489, 33013.302765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25894.696625, 31871.783539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20744.327200, 36248.124000, 1772.784051, 1772.784051, 0.000000, X, Y) && !ellipse(24257.573700, 35597.742798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26628.072000, 31593.718000, 2699.408078, 2699.408078, 0.000000, X, Y) && !ellipse(26996.882000, 31580.056000, 1403.488040, 1403.488040, 0.000000, X, Y) && !ellipse(26288.041870, 35501.399750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23026.850000, 34067.658000, 1634.144047, 1634.144047, 0.000000, X, Y) && !ellipse(24732.282800, 32888.441600, 1480.848043, 1480.848043, 0.000000, X, Y) && !ellipse(24829.697998, 34584.469452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23562.277283, 32592.894806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.078000, 33441.764000, 961.352028, 961.352028, 0.000000, X, Y) && !ellipse(24301.594086, 33785.754333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24475.915344, 32391.287811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20938.469803, 35881.974304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24636.578000, 32027.454000, 1413.488041, 1413.488041, 0.000000, X, Y) && !ellipse(25675.970001, 33435.707306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25351.774994, 32827.594086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.046936, 31711.231262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25276.422607, 32060.983582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25220.955082, 35804.645251, 1081.840031, 1081.840031, 125.660993, X, Y) && !ellipse(21456.631958, 36479.549713, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 10:26:54 2012] Writing fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src37.gif
[Wed Jul 18 11:24:04 2012] Mean detx,y = (-9855.37, 1955.29) 
[Wed Jul 18 11:24:05 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 11:24:15 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 11:24:16 2012] Setting source spectrum file to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Wed Jul 18 11:24:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Wed Jul 18 15:17:22 2012] Not generating rmf since there are only 91 counts
[Wed Jul 18 15:17:22 2012] rmf not generated due to insufficient counts
[Wed Jul 18 18:35:44 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:44 2012] Error reading totcts from fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Wed Jul 18 18:35:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:46 2012] Using photon index=1.80, rate=0.0228, arf fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src37.arf
[Wed Jul 18 18:35:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:46 2012] Updating source flux to 3.8e-13
[Wed Jul 18 18:35:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting