[Mon Jul 16 18:08:35 2012] Detection parameters:
  Position = (259.9, 399.2) = 20 57 28.59 31 8 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.0 +/- 19.1
  Background counts = 102.7
  Rate = 0.03 +/- 0.005

[Mon Jul 16 18:08:38 2012] Off-axis axis estimate = 7.82'
[Tue Jul 17 00:54:11 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 00:54:11 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Tue Jul 17 00:54:11 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.088
[Tue Jul 17 00:54:11 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 10.34"
[Tue Jul 17 07:00:01 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src62.ximg exists
[Tue Jul 17 07:00:01 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src62_1.ximg exists
[Tue Jul 17 07:00:01 2012] Fit fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src62 appears to have run properly
[Tue Jul 17 07:00:04 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Tue Jul 17 07:00:04 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Tue Jul 17 07:00:04 2012] Fit fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Tue Jul 17 13:30:32 2012] Warning, spatial fit 62 centroid is now closest to src. 26
[Tue Jul 17 13:30:32 2012] Spatial fit model total counts = 1930.450000, observed total counts = 1928.000000
[Tue Jul 17 13:30:32 2012] Offset between fit and detection position for source 33 = 6.695550 pixels
[Tue Jul 17 13:30:32 2012] Warning, changing simple spatial fit ID from 62 to 82
[Tue Jul 17 13:30:32 2012] 1929.116000 total counts/ 1558.250000 bgd. counts: snr = 9.395036
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 6.695550 pixels
  Position = (266.6, 398.6) = 20 57 26.33 31 8 34.2
  Extent = 20.4 (20.3-20.4)", rotation angle = 0
  Source counts = 370.9 +/- 43.9
  Background counts = 1558.2
  Rate = 0.05 +/- 0.006
[Tue Jul 17 13:30:32 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:30:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:30:32 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 13:30:32 2012] Source does appear to be extended
[Tue Jul 17 13:30:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:30:32 2012] Source is confused with source 38
[Tue Jul 17 13:30:32 2012] Source is confused with source 37
[Tue Jul 17 13:30:32 2012] Source is confused with source 46
[Tue Jul 17 20:30:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 17 20:30:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 17 20:30:29 2012] Initial guess for spatial extent in simple fitting = 20.40"
[Tue Jul 17 20:30:29 2012] source mask rpix=4.7, npix_max = 107, mask sum = 121, frac = 1.123
[Tue Jul 17 20:30:29 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 20.40"
[Wed Jul 18 02:32:47 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src48.ximg exists
[Wed Jul 18 02:32:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src48.csv
[Wed Jul 18 02:32:47 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src48_1.ximg exists
[Wed Jul 18 02:32:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src48.csv
[Wed Jul 18 02:32:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 02:32:50 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Wed Jul 18 02:32:50 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Wed Jul 18 02:32:50 2012] Fit fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Wed Jul 18 08:19:43 2012] Source 33 is offset by 6.691333 and -0.913476 pixels which is larger than
2 X fitted extent = 3.041320 x 3.041320, not incorporating fit results
[Wed Jul 18 08:19:43 2012] Spatial fit model total counts = 1930.350000, observed total counts = 1928.000000
[Wed Jul 18 08:19:43 2012] Offset between fit and detection position for source 33 = 6.592595 pixels
[Wed Jul 18 08:19:43 2012] Warning, changing simple spatial fit ID from 48 to 65
[Wed Jul 18 08:19:43 2012] 1439.907000 total counts/ 1248.070000 bgd. counts: snr = 5.430163
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 6.592595 pixels
  Position = (265.2, 392.1) = 20 57 26.78 31 8 6.1
  Extent = 20.4 (12.3-40.9)", rotation angle = 0
  Source counts = 191.8 +/- 37.9
  Background counts = 1248.1
  Rate = 0.03 +/- 0.005
[Wed Jul 18 08:19:43 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:19:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:19:43 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 08:19:43 2012] Source does appear to be extended
[Wed Jul 18 08:19:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 10:26:54 2012] XMMSAS src. selection expression = ellipse(23026.850000, 34067.658000, 1225.608035, 1225.608035, 0.000000, X, Y)
[Wed Jul 18 10:26:54 2012] Writing source region out to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src33_src.reg
[Wed Jul 18 10:26:54 2012] Extracting stamp from image fullrun_mos1_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (195, 322) - (336, 463)
[Wed Jul 18 10:26:54 2012] XMMSAS bgd. selection expression = annulus(23026.850000, 34067.658000, 2042.680059, 4085.360118, X, Y) && !ellipse(20831.892944, 34151.473999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24783.391600, 29246.914000, 2417.072070, 2417.072070, 0.000000, X, Y) && !ellipse(25236.124000, 35025.218000, 1053.464030, 1053.464030, 0.000000, X, Y) && !ellipse(25921.880702, 29072.923000, 1745.016050, 1745.016050, 0.000000, X, Y) && !ellipse(24721.296000, 29696.174000, 1315.168038, 1315.168038, 0.000000, X, Y) && !ellipse(20081.863098, 35447.207947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25382.427307, 35531.627258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20566.109909, 35713.448975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24290.899200, 34776.790200, 1611.352046, 501.448014, 90.000000, X, Y) && !ellipse(26576.582489, 33013.302765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25894.696625, 31871.783539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20744.327200, 36248.124000, 1772.784051, 1772.784051, 0.000000, X, Y) && !ellipse(27032.371368, 33355.814819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27598.280243, 31281.520081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26000.094000, 30948.130000, 1324.464038, 1324.464038, 0.000000, X, Y) && !ellipse(24257.573700, 35597.742798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27635.060364, 33184.493744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26628.072000, 31593.718000, 2699.408078, 2699.408078, 0.000000, X, Y) && !ellipse(26996.882000, 31580.056000, 1403.488040, 1403.488040, 0.000000, X, Y) && !ellipse(24460.258636, 30667.390564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24229.948120, 29870.196777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25583.028046, 31475.998322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26391.171173, 30328.298187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26288.041870, 35501.399750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24732.282800, 32888.441600, 1480.848043, 1480.848043, 0.000000, X, Y) && !ellipse(27015.100403, 33704.967102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24829.697998, 34584.469452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23562.277283, 32592.894806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27629.468872, 33959.597687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23724.916412, 34730.942108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.078000, 33441.764000, 961.352028, 961.352028, 0.000000, X, Y) && !ellipse(27777.481445, 30611.475647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24301.594086, 33785.754333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26226.436400, 30533.650000, 1349.704039, 1349.704039, 0.000000, X, Y) && !ellipse(24475.915344, 32391.287811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28229.332000, 32731.284400, 1506.224043, 1506.224043, 0.000000, X, Y) && !ellipse(20938.469803, 35881.974304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24636.578000, 32027.454000, 1413.488041, 1413.488041, 0.000000, X, Y) && !ellipse(19817.726181, 36315.617584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25675.970001, 33435.707306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25351.774994, 32827.594086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.046936, 31711.231262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25276.422607, 32060.983582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18911.666901, 36415.417480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18591.451782, 37874.342804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24060.018000, 31052.246000, 1357.496039, 1357.496039, 0.000000, X, Y) && !ellipse(25220.955082, 35804.645251, 1081.840031, 1081.840031, 125.660993, X, Y) && !ellipse(18527.829315, 37005.189758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19993.259460, 37532.497162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21456.631958, 36479.549713, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 10:26:54 2012] Writing fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src33.gif
[Wed Jul 18 11:18:06 2012] Mean detx,y = (-9186.50, 2497.85) 
[Wed Jul 18 11:18:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 11:18:45 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 11:18:45 2012] Setting source spectrum file to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed Jul 18 11:18:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Wed Jul 18 18:35:44 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:44 2012] Error reading totcts from fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed Jul 18 18:35:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:46 2012] Using photon index=1.80, rate=0.0263, arf fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src33.arf
[Wed Jul 18 18:35:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:46 2012] Updating source flux to 3.7e-13
[Wed Jul 18 18:35:56 2012] Flag b found in src. 33 procflags, skipping spectral fitting
[Wed Jul 18 18:35:56 2012] Flag c found in src. 33 procflags, skipping spectral fitting