[Mon Jul 16 18:08:34 2012] Detection parameters:
  Position = (280.5, 319.0) = 20 57 21.61 31 2 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 524.0 +/- 31.4
  Background counts = 60.0
  Rate = 0.08 +/- 0.005

[Mon Jul 16 18:08:38 2012] Off-axis axis estimate = 1.98'
[Tue Jul 17 00:54:11 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 00:54:11 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Tue Jul 17 00:54:11 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.028
[Tue Jul 17 00:54:11 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.42"
[Tue Jul 17 07:00:00 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src4.ximg exists
[Tue Jul 17 07:00:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src4.csv
[Tue Jul 17 07:00:00 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Jul 17 07:00:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src4.csv
[Tue Jul 17 07:00:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 07:00:02 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Jul 17 07:00:02 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Jul 17 07:00:02 2012] Fit fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Jul 17 13:30:31 2012] Warning, spatial fit 4 centroid is now closest to src. 5
[Tue Jul 17 13:30:31 2012] Source 3 is offset by -1.092211 and -3.024417 pixels which is larger than
2 X fitted extent = 0.870028 x 0.870028, not incorporating fit results
[Tue Jul 17 13:30:31 2012] Spatial fit model total counts = 3111.340000, observed total counts = 3111.000000
[Tue Jul 17 13:30:31 2012] Offset between fit and detection position for source 3 = 1.044016 pixels
[Tue Jul 17 13:30:31 2012] Warning, changing simple spatial fit ID from 4 to 14
[Tue Jul 17 13:30:31 2012] 3030.618000 total counts/ 2506.710000 bgd. counts: snr = 10.464127
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.044016 pixels
  Position = (279.5, 319.4) = 20 57 21.95 31 2 49.5
  Extent = 14.5 (14.5-29.1)", rotation angle = 0
  Source counts = 523.9 +/- 55.1
  Background counts = 2506.7
  Rate = 0.07 +/- 0.008
[Tue Jul 17 13:30:32 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:30:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:30:32 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 13:30:32 2012] Source does appear to be extended
[Tue Jul 17 13:30:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:30:32 2012] Source is confused with source 126
[Tue Jul 17 13:30:32 2012] Source is confused with source 117
[Tue Jul 17 20:30:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 17 20:30:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 17 20:30:29 2012] Initial guess for spatial extent in simple fitting = 14.54"
[Tue Jul 17 20:30:29 2012] source mask rpix=3.3, npix_max = 59, mask sum = 49, frac = 0.830
[Tue Jul 17 20:30:29 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 14.54"
[Wed Jul 18 02:32:46 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jul 18 02:32:46 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jul 18 02:32:46 2012] Fit fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src4 appears to have run properly
[Wed Jul 18 02:32:48 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jul 18 02:32:48 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jul 18 02:32:49 2012] Fit fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Jul 18 08:19:43 2012] Warning, spatial fit 4 centroid is now closest to src. 135
[Wed Jul 18 08:19:43 2012] Spatial fit model total counts = 2942.110000, observed total counts = 2944.000000
[Wed Jul 18 08:19:43 2012] Offset between fit and detection position for source 3 = 1.717069 pixels
[Wed Jul 18 08:19:43 2012] Warning, changing simple spatial fit ID from 4 to 19
[Wed Jul 18 08:19:43 2012] 2850.012000 total counts/ 2692.790000 bgd. counts: snr = 3.029787
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.717069 pixels
  Position = (281.1, 320.0) = 20 57 21.41 31 2 52.4
  Extent = 10.2 (5.7-15.2)", rotation angle = 0
  Source counts = 157.2 +/- 53.4
  Background counts = 2692.8
  Rate = 0.02 +/- 0.007
[Wed Jul 18 08:19:43 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:19:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:19:43 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 08:19:43 2012] Source does appear to be extended
[Wed Jul 18 08:19:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 10:26:50 2012] XMMSAS src. selection expression = ellipse(24403.633200, 27793.832000, 612.534018, 612.534018, 0.000000, X, Y)
[Wed Jul 18 10:26:50 2012] Writing source region out to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src3_src.reg
[Wed Jul 18 10:26:50 2012] Extracting stamp from image fullrun_mos1_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (246, 285) - (316, 355)
[Wed Jul 18 10:26:50 2012] XMMSAS bgd. selection expression = annulus(24403.633200, 27793.832000, 1020.890029, 2041.780059, X, Y) && !ellipse(24537.985400, 24727.285900, 1147.136033, 1147.136033, 0.000000, X, Y) && !ellipse(24699.660600, 24920.331800, 1119.416032, 1119.416032, 0.000000, X, Y) && !ellipse(24935.896200, 26013.768000, 2251.424065, 2251.424065, 0.000000, X, Y) && !ellipse(25824.442800, 25047.288800, 1094.568031, 1094.568031, 0.000000, X, Y) && !ellipse(24783.391600, 29246.914000, 2417.072070, 2417.072070, 0.000000, X, Y) && !ellipse(25886.481000, 27554.325200, 793.294423, 793.294423, 0.000000, X, Y) && !ellipse(24841.007200, 26501.082000, 1125.712032, 1125.712032, 0.000000, X, Y) && !ellipse(25921.880702, 29072.923000, 1745.016050, 1745.016050, 0.000000, X, Y) && !ellipse(24721.296000, 29696.174000, 1315.168038, 1315.168038, 0.000000, X, Y) && !ellipse(24505.550781, 27357.591217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24521.916382, 28311.115784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26888.168000, 28224.400000, 1214.032035, 1214.032035, 0.000000, X, Y) && !ellipse(26761.454200, 25794.850160, 818.728024, 818.728024, 0.000000, X, Y) && !ellipse(26524.270447, 25012.188782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26498.941200, 27834.482000, 1147.184033, 1147.184033, 0.000000, X, Y) && !ellipse(26000.094000, 30948.130000, 1324.464038, 1324.464038, 0.000000, X, Y) && !ellipse(26628.072000, 31593.718000, 2699.408078, 2699.408078, 0.000000, X, Y) && !ellipse(24460.258636, 30667.390564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24229.948120, 29870.196777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26391.171173, 30328.298187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23571.462000, 23599.626000, 2292.224066, 2292.224066, 0.000000, X, Y) && !ellipse(27130.955261, 28929.405731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26953.056000, 26852.868000, 1116.272032, 1116.272032, 0.000000, X, Y) && !ellipse(26226.436400, 30533.650000, 1349.704039, 1349.704039, 0.000000, X, Y) && !ellipse(26159.963257, 26391.333130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24060.018000, 31052.246000, 1357.496039, 1357.496039, 0.000000, X, Y)
[Wed Jul 18 10:26:50 2012] Writing fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src3.gif
[Wed Jul 18 10:28:42 2012] Mean detx,y = (-3046.49, 359.21) 
[Wed Jul 18 10:28:45 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 10:28:58 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 10:28:58 2012] Setting source spectrum file to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jul 18 10:28:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jul 18 18:35:43 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:43 2012] Error reading totcts from fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jul 18 18:35:45 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:45 2012] Using photon index=1.80, rate=0.0215, arf fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src3.arf
[Wed Jul 18 18:35:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:45 2012] Updating source flux to 2.3e-13
[Wed Jul 18 18:35:55 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Wed Jul 18 18:35:55 2012] Flag c found in src. 3 procflags, skipping spectral fitting