[Mon Jul 16 18:08:37 2012] Detection parameters:
  Position = (306.9, 311.0) = 20 57 12.67 31 2 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.4 +/- 25.4
  Background counts = 183.0
  Rate = 0.02 +/- 0.004

[Mon Jul 16 18:08:38 2012] Off-axis axis estimate = 1.10'
[Tue Jul 17 00:54:11 2012] Using EEF radius (= 6.98 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 00:54:11 2012] Initial guess for spatial extent in simple fitting = 6.98"
[Tue Jul 17 00:54:11 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.904
[Tue Jul 17 00:54:11 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 6.98"
[Tue Jul 17 07:00:02 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src72.ximg exists
[Tue Jul 17 07:00:02 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src72_1.ximg exists
[Tue Jul 17 07:00:02 2012] Fit fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src72 appears to have run properly
[Tue Jul 17 07:00:05 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Tue Jul 17 07:00:05 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Tue Jul 17 07:00:05 2012] Fit fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src72 appears to have run properly
[Tue Jul 17 13:30:31 2012] Source 128 is offset by -6.343009 and 1.747964 pixels which is larger than
2 X fitted extent = 0.778584 x 0.778584, not incorporating fit results
[Tue Jul 17 13:30:32 2012] Source 128 is offset by 6.301037 and -6.624955 pixels which is larger than
2 X fitted extent = 6.415357 x 6.415357, not incorporating fit results
[Tue Jul 17 13:30:32 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:30:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:30:32 2012] Assessing source extent using major
[Tue Jul 17 13:30:32 2012] Source does appear to be extended
[Tue Jul 17 13:30:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:30:32 2012] Source is confused with source 123
[Tue Jul 17 20:30:29 2012] Using EEF radius (= 6.98 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 20:30:29 2012] Initial guess for spatial extent in simple fitting = 6.98"
[Tue Jul 17 20:30:29 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.904
[Tue Jul 17 20:30:29 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 6.98"
[Wed Jul 18 02:32:47 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src57.ximg exists
[Wed Jul 18 02:32:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src57.csv
[Wed Jul 18 02:32:47 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src57_1.ximg exists
[Wed Jul 18 02:32:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src57.csv
[Wed Jul 18 02:32:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 02:32:50 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Wed Jul 18 02:32:50 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Wed Jul 18 02:32:50 2012] Fit fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Wed Jul 18 08:19:43 2012] Source 128 is offset by -0.232641 and 2.094976 pixels which is larger than
2 X fitted extent = 1.139793 x 1.139793, not incorporating fit results
[Wed Jul 18 08:19:43 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 128 at 11.320557 pixels away
[Wed Jul 18 08:19:43 2012] Spatial fit model total counts = 3133.030000, observed total counts = 3130.000000
[Wed Jul 18 08:19:43 2012] Offset between fit and detection position for source 128 = 3.899594 pixels
[Wed Jul 18 08:19:43 2012] 2992.588000 total counts/ 2795.190000 bgd. counts: snr = 3.733680
Spatial fit parameters:
  Offset between fit and detection position for source 128 = 3.899594 pixels
  Position = (310.4, 309.2) = 20 57 11.49 31 2 5.4
  Extent = 14.0 (10.2-27.9)", rotation angle = 0
  Source counts = 197.4 +/- 54.7
  Background counts = 2795.2
  Rate = 0.03 +/- 0.007
[Wed Jul 18 08:19:43 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:19:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:19:43 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 08:19:43 2012] Source does appear to be extended
[Wed Jul 18 08:19:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 10:26:54 2012] XMMSAS src. selection expression = ellipse(26953.056000, 26852.868000, 837.204024, 837.204024, 0.000000, X, Y)
[Wed Jul 18 10:26:54 2012] Writing source region out to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src128_src.reg
[Wed Jul 18 10:26:54 2012] Extracting stamp from image fullrun_mos1_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (262, 261) - (358, 357)
[Wed Jul 18 10:26:54 2012] XMMSAS bgd. selection expression = annulus(26953.056000, 26852.868000, 1395.340040, 2790.680080, X, Y) && !ellipse(24537.985400, 24727.285900, 1147.136033, 1147.136033, 0.000000, X, Y) && !ellipse(24699.660600, 24920.331800, 1119.416032, 1119.416032, 0.000000, X, Y) && !ellipse(24403.633200, 27793.832000, 816.712024, 816.712024, 0.000000, X, Y) && !ellipse(24935.896200, 26013.768000, 2251.424065, 2251.424065, 0.000000, X, Y) && !ellipse(25824.442800, 25047.288800, 1094.568031, 1094.568031, 0.000000, X, Y) && !ellipse(24783.391600, 29246.914000, 2417.072070, 2417.072070, 0.000000, X, Y) && !ellipse(25886.481000, 27554.325200, 793.294423, 793.294423, 0.000000, X, Y) && !ellipse(24841.007200, 26501.082000, 1125.712032, 1125.712032, 0.000000, X, Y) && !ellipse(25921.880702, 29072.923000, 1745.016050, 1745.016050, 0.000000, X, Y) && !ellipse(24721.296000, 29696.174000, 1315.168038, 1315.168038, 0.000000, X, Y) && !ellipse(24505.550781, 27357.591217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24521.916382, 28311.115784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26888.168000, 28224.400000, 1214.032035, 1214.032035, 0.000000, X, Y) && !ellipse(26761.454200, 25794.850160, 818.728024, 818.728024, 0.000000, X, Y) && !ellipse(26524.270447, 25012.188782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26498.941200, 27834.482000, 1147.184033, 1147.184033, 0.000000, X, Y) && !ellipse(26000.094000, 30948.130000, 1324.464038, 1324.464038, 0.000000, X, Y) && !ellipse(26628.072000, 31593.718000, 2699.408078, 2699.408078, 0.000000, X, Y) && !ellipse(27191.204800, 24534.620000, 1143.528033, 1143.528033, 0.000000, X, Y) && !ellipse(24229.948120, 29870.196777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26391.171173, 30328.298187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23571.462000, 23599.626000, 2292.224066, 2292.224066, 0.000000, X, Y) && !ellipse(27130.955261, 28929.405731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26226.436400, 30533.650000, 1349.704039, 1349.704039, 0.000000, X, Y) && !ellipse(26352.301544, 23802.613190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25509.313812, 23269.284180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26159.963257, 26391.333130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23781.090000, 23300.502000, 1222.096035, 1222.096035, 0.000000, X, Y)
[Wed Jul 18 10:26:54 2012] Writing fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src128.gif
[Wed Jul 18 11:22:10 2012] Mean detx,y = (-2459.50, -2262.00) 
[Wed Jul 18 11:22:12 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 11:22:23 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 11:22:24 2012] Setting source spectrum file to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src128_src_b10.pi.gz
[Wed Jul 18 11:22:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src128_bgd.pi.gz
[Wed Jul 18 18:35:44 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:44 2012] Error reading totcts from fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src128_src_b10.pi.gz
[Wed Jul 18 18:35:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:46 2012] Using photon index=1.80, rate=0.027, arf fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src128.arf
[Wed Jul 18 18:35:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:46 2012] Updating source flux to 2.8e-13
[Wed Jul 18 18:35:56 2012] Flag b found in src. 128 procflags, skipping spectral fitting
[Wed Jul 18 18:35:56 2012] Flag c found in src. 128 procflags, skipping spectral fitting