[Mon Jul 16 18:08:37 2012] Detection parameters:
  Position = (303.9, 329.9) = 20 57 13.69 31 3 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 290.8 +/- 30.0
  Background counts = 157.7
  Rate = 0.05 +/- 0.005

[Mon Jul 16 18:08:38 2012] Off-axis axis estimate = 2.32'
[Tue Jul 17 00:54:11 2012] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 00:54:11 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Tue Jul 17 00:54:11 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.794
[Tue Jul 17 00:54:11 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.59"
[Tue Jul 17 07:00:00 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src20.ximg exists
[Tue Jul 17 07:00:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src20.csv
[Tue Jul 17 07:00:00 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue Jul 17 07:00:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src20.csv
[Tue Jul 17 07:00:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 07:00:03 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue Jul 17 07:00:03 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Jul 17 07:00:03 2012] Fit fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Tue Jul 17 13:30:31 2012] Spatial fit model total counts = 3715.840000, observed total counts = 3716.000000
[Tue Jul 17 13:30:31 2012] Offset between fit and detection position for source 112 = 7.603353 pixels
[Tue Jul 17 13:30:31 2012] 3680.784000 total counts/ 3557.700000 bgd. counts: snr = 2.063559
Spatial fit parameters:
  Offset between fit and detection position for source 112 = 7.603353 pixels
  Position = (309.6, 325.0) = 20 57 11.75 31 3 13.9
  Extent = 15.2 (15.1-30.4)", rotation angle = 0
  Source counts = 123.1 +/- 60.7
  Background counts = 3557.7
  Rate = 0.02 +/- 0.008
[Tue Jul 17 13:30:32 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:30:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:30:32 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 13:30:32 2012] Source does appear to be extended
[Tue Jul 17 13:30:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:30:32 2012] Source is confused with source 123
[Tue Jul 17 13:30:32 2012] Source is confused with source 105
[Tue Jul 17 20:30:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 17 20:30:29 2012] Initial guess for spatial extent in simple fitting = 15.18"
[Tue Jul 17 20:30:29 2012] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.006
[Tue Jul 17 20:30:29 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 15.18"
[Wed Jul 18 02:32:46 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src20.ximg exists
[Wed Jul 18 02:32:46 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed Jul 18 02:32:46 2012] Fit fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src20 appears to have run properly
[Wed Jul 18 02:32:49 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed Jul 18 02:32:49 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Jul 18 02:32:49 2012] Fit fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Wed Jul 18 08:19:43 2012] Warning, spatial fit 20 centroid is now closest to src. 105
[Wed Jul 18 08:19:43 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:19:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:19:43 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 08:19:43 2012] Source does appear to be extended
[Wed Jul 18 08:19:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 10:26:51 2012] XMMSAS src. selection expression = ellipse(26888.168000, 28224.400000, 910.524026, 910.524026, 0.000000, X, Y)
[Wed Jul 18 10:26:51 2012] Writing source region out to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src112_src.reg
[Wed Jul 18 10:26:51 2012] Extracting stamp from image fullrun_mos1_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (257, 273) - (362, 377)
[Wed Jul 18 10:26:51 2012] XMMSAS bgd. selection expression = annulus(26888.168000, 28224.400000, 1517.540044, 3035.080087, X, Y) && !ellipse(24537.985400, 24727.285900, 1147.136033, 1147.136033, 0.000000, X, Y) && !ellipse(24699.660600, 24920.331800, 1119.416032, 1119.416032, 0.000000, X, Y) && !ellipse(24403.633200, 27793.832000, 816.712024, 816.712024, 0.000000, X, Y) && !ellipse(24935.896200, 26013.768000, 2251.424065, 2251.424065, 0.000000, X, Y) && !ellipse(25824.442800, 25047.288800, 1094.568031, 1094.568031, 0.000000, X, Y) && !ellipse(24783.391600, 29246.914000, 2417.072070, 2417.072070, 0.000000, X, Y) && !ellipse(25886.481000, 27554.325200, 793.294423, 793.294423, 0.000000, X, Y) && !ellipse(24841.007200, 26501.082000, 1125.712032, 1125.712032, 0.000000, X, Y) && !ellipse(25921.880702, 29072.923000, 1745.016050, 1745.016050, 0.000000, X, Y) && !ellipse(24721.296000, 29696.174000, 1315.168038, 1315.168038, 0.000000, X, Y) && !ellipse(24505.550781, 27357.591217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24521.916382, 28311.115784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26761.454200, 25794.850160, 818.728024, 818.728024, 0.000000, X, Y) && !ellipse(26524.270447, 25012.188782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26498.941200, 27834.482000, 1147.184033, 1147.184033, 0.000000, X, Y) && !ellipse(25894.696625, 31871.783539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27598.280243, 31281.520081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26000.094000, 30948.130000, 1324.464038, 1324.464038, 0.000000, X, Y) && !ellipse(26628.072000, 31593.718000, 2699.408078, 2699.408078, 0.000000, X, Y) && !ellipse(26996.882000, 31580.056000, 1403.488040, 1403.488040, 0.000000, X, Y) && !ellipse(27191.204800, 24534.620000, 1143.528033, 1143.528033, 0.000000, X, Y) && !ellipse(24460.258636, 30667.390564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24229.948120, 29870.196777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25583.028046, 31475.998322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26391.171173, 30328.298187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23571.462000, 23599.626000, 2292.224066, 2292.224066, 0.000000, X, Y) && !ellipse(27130.955261, 28929.405731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26953.056000, 26852.868000, 1116.272032, 1116.272032, 0.000000, X, Y) && !ellipse(27777.481445, 30611.475647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26226.436400, 30533.650000, 1349.704039, 1349.704039, 0.000000, X, Y) && !ellipse(28229.332000, 32731.284400, 1506.224043, 1506.224043, 0.000000, X, Y) && !ellipse(24636.578000, 32027.454000, 1413.488041, 1413.488041, 0.000000, X, Y) && !ellipse(26159.963257, 26391.333130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.046936, 31711.231262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25276.422607, 32060.983582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24060.018000, 31052.246000, 1357.496039, 1357.496039, 0.000000, X, Y)
[Wed Jul 18 10:26:51 2012] Writing fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src112.gif
[Wed Jul 18 10:57:33 2012] Mean detx,y = (-3816.83, -1978.70) 
[Wed Jul 18 10:57:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 10:57:51 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 10:57:51 2012] Setting source spectrum file to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src112_src_b10.pi.gz
[Wed Jul 18 10:57:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src112_bgd.pi.gz
[Wed Jul 18 18:35:43 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:43 2012] Error reading totcts from fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src112_src_b10.pi.gz
[Wed Jul 18 18:35:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:46 2012] Using photon index=1.80, rate=0.0169, arf fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src112.arf
[Wed Jul 18 18:35:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:46 2012] Updating source flux to 1.8e-13
[Wed Jul 18 18:35:56 2012] Flag c found in src. 112 procflags, skipping spectral fitting