[Mon Jul 16 18:08:36 2012] Detection parameters:
  Position = (312.4, 333.1) = 20 57 10.80 31 3 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.4 +/- 24.6
  Background counts = 200.0
  Rate = 0.02 +/- 0.004

[Mon Jul 16 18:08:38 2012] Off-axis axis estimate = 2.71'
[Tue Jul 17 00:54:11 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 00:54:11 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Tue Jul 17 00:54:11 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.954
[Tue Jul 17 00:54:11 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 7.78"
[Tue Jul 17 07:00:02 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src71.ximg exists
[Tue Jul 17 07:00:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src71.csv
[Tue Jul 17 07:00:02 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src71_1.ximg exists
[Tue Jul 17 07:00:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src71.csv
[Tue Jul 17 07:00:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 07:00:05 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Tue Jul 17 07:00:05 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Tue Jul 17 07:00:05 2012] Fit fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Tue Jul 17 13:30:32 2012] Source 105 is offset by -5.145802 and -3.958969 pixels which is larger than
2 X fitted extent = 1.743421 x 1.743421, not incorporating fit results
[Tue Jul 17 13:30:32 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:30:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:30:32 2012] Assessing source extent using major
[Tue Jul 17 13:30:32 2012] Source does appear to be extended
[Tue Jul 17 13:30:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:30:32 2012] Source is confused with source 112
[Tue Jul 17 20:30:29 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 20:30:29 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Tue Jul 17 20:30:29 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.954
[Tue Jul 17 20:30:29 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 7.78"
[Wed Jul 18 02:32:47 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src56.ximg exists
[Wed Jul 18 02:32:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src56.csv
[Wed Jul 18 02:32:47 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src56_1.ximg exists
[Wed Jul 18 02:32:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src56.csv
[Wed Jul 18 02:32:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 02:32:50 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Wed Jul 18 02:32:50 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Wed Jul 18 02:32:50 2012] Fit fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src56 appears to have run properly
[Wed Jul 18 08:19:43 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 105 at 11.038988 pixels away
[Wed Jul 18 08:19:43 2012] Source 105 is offset by -0.216951 and -8.296141 pixels which is larger than
2 X fitted extent = 1.078060 x 1.078060, not incorporating fit results
[Wed Jul 18 08:19:43 2012] Source 105 is offset by -5.166238 and -3.937911 pixels which is larger than
2 X fitted extent = 1.737825 x 1.737825, not incorporating fit results
[Wed Jul 18 08:19:43 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:19:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:19:43 2012] Assessing source extent using major
[Wed Jul 18 08:19:43 2012] Source does appear to be extended
[Wed Jul 18 08:19:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 10:26:54 2012] XMMSAS src. selection expression = ellipse(27130.955261, 28929.405731, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 10:26:54 2012] Writing source region out to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src105_src.reg
[Wed Jul 18 10:26:54 2012] Extracting stamp from image fullrun_mos1_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (275, 296) - (350, 371)
[Wed Jul 18 10:26:54 2012] XMMSAS bgd. selection expression = annulus(27130.955261, 28929.405731, 1087.500000, 2175.000000, X, Y) && !ellipse(24403.633200, 27793.832000, 816.712024, 816.712024, 0.000000, X, Y) && !ellipse(24935.896200, 26013.768000, 2251.424065, 2251.424065, 0.000000, X, Y) && !ellipse(24783.391600, 29246.914000, 2417.072070, 2417.072070, 0.000000, X, Y) && !ellipse(25886.481000, 27554.325200, 793.294423, 793.294423, 0.000000, X, Y) && !ellipse(24841.007200, 26501.082000, 1125.712032, 1125.712032, 0.000000, X, Y) && !ellipse(25921.880702, 29072.923000, 1745.016050, 1745.016050, 0.000000, X, Y) && !ellipse(24721.296000, 29696.174000, 1315.168038, 1315.168038, 0.000000, X, Y) && !ellipse(24505.550781, 27357.591217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24521.916382, 28311.115784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26888.168000, 28224.400000, 1214.032035, 1214.032035, 0.000000, X, Y) && !ellipse(26498.941200, 27834.482000, 1147.184033, 1147.184033, 0.000000, X, Y) && !ellipse(25894.696625, 31871.783539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27598.280243, 31281.520081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26000.094000, 30948.130000, 1324.464038, 1324.464038, 0.000000, X, Y) && !ellipse(26628.072000, 31593.718000, 2699.408078, 2699.408078, 0.000000, X, Y) && !ellipse(26996.882000, 31580.056000, 1403.488040, 1403.488040, 0.000000, X, Y) && !ellipse(24460.258636, 30667.390564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24229.948120, 29870.196777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25583.028046, 31475.998322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26391.171173, 30328.298187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26953.056000, 26852.868000, 1116.272032, 1116.272032, 0.000000, X, Y) && !ellipse(27777.481445, 30611.475647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26226.436400, 30533.650000, 1349.704039, 1349.704039, 0.000000, X, Y) && !ellipse(24636.578000, 32027.454000, 1413.488041, 1413.488041, 0.000000, X, Y) && !ellipse(26159.963257, 26391.333130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.046936, 31711.231262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24060.018000, 31052.246000, 1357.496039, 1357.496039, 0.000000, X, Y)
[Wed Jul 18 10:26:54 2012] Writing fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src105.gif
[Wed Jul 18 11:21:48 2012] Mean detx,y = (-4534.07, -2149.25) 
[Wed Jul 18 11:21:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 11:22:02 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 11:22:02 2012] Setting source spectrum file to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src105_src_b10.pi.gz
[Wed Jul 18 11:22:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src105_bgd.pi.gz
[Wed Jul 18 15:07:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 15:07:10 2012] rmf not generated due to insufficient counts
[Wed Jul 18 18:35:44 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:44 2012] Error reading totcts from fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src105_src_b10.pi.gz
[Wed Jul 18 18:35:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:46 2012] Using photon index=1.80, rate=0.0242, arf fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src105.arf
[Wed Jul 18 18:35:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:46 2012] Updating source flux to 2.9e-13
[Wed Jul 18 18:35:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting