[Mon Jul 16 18:08:34 2012] Detection parameters:
  Position = (282.5, 284.0) = 20 57 20.92 31 0 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 894.9 +/- 39.5
  Background counts = 62.4
  Rate = 0.1 +/- 0.005

[Mon Jul 16 18:08:38 2012] Off-axis axis estimate = 1.56'
[Tue Jul 17 00:54:11 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 00:54:11 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Tue Jul 17 00:54:11 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.074
[Tue Jul 17 00:54:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.21"
[Tue Jul 17 07:00:00 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul 17 07:00:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src1.csv
[Tue Jul 17 07:00:00 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul 17 07:00:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src1.csv
[Tue Jul 17 07:00:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 07:00:02 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 17 07:00:02 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 17 07:00:02 2012] Fit fullrun_mos1_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul 17 13:30:31 2012] Spatial fit model total counts = 3475.600000, observed total counts = 3481.000000
[Tue Jul 17 13:30:31 2012] Offset between fit and detection position for source 1 = 0.822298 pixels
[Tue Jul 17 13:30:31 2012] 3612.633000 total counts/ 2758.730000 bgd. counts: snr = 16.257507
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.822298 pixels
  Position = (282.6, 284.8) = 20 57 20.89 31 0 19.1
  Extent = 14.3 (14.2-14.4)", rotation angle = 0
  Source counts = 853.9 +/- 60.1
  Background counts = 2758.7
  Rate = 0.1 +/- 0.008
[Tue Jul 17 13:30:32 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:30:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:30:32 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 13:30:32 2012] Source does appear to be extended
[Tue Jul 17 13:30:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:30:32 2012] Source is confused with source 2
[Tue Jul 17 20:30:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 17 20:30:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 17 20:30:29 2012] Initial guess for spatial extent in simple fitting = 14.34"
[Tue Jul 17 20:30:29 2012] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.971
[Tue Jul 17 20:30:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.34"
[Wed Jul 18 02:32:46 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 18 02:32:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src1.csv
[Wed Jul 18 02:32:46 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 18 02:32:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src1.csv
[Wed Jul 18 02:32:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 02:32:48 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 18 02:32:48 2012] fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 18 02:32:48 2012] Fit fullrun_mos1_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 18 08:19:43 2012] Warning, spatial fit 1 centroid is now closest to src. 150
[Wed Jul 18 08:19:43 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:19:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:19:43 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 08:19:43 2012] Source does appear to be extended
[Wed Jul 18 08:19:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 10:26:50 2012] XMMSAS src. selection expression = ellipse(24537.985400, 24727.285900, 860.352025, 860.352025, 0.000000, X, Y)
[Wed Jul 18 10:26:50 2012] Writing source region out to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 18 10:26:50 2012] Extracting stamp from image fullrun_mos1_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (233, 235) - (332, 334)
[Wed Jul 18 10:26:50 2012] XMMSAS bgd. selection expression = annulus(24537.985400, 24727.285900, 1433.920041, 2867.840083, X, Y) && !ellipse(24699.660600, 24920.331800, 1119.416032, 1119.416032, 0.000000, X, Y) && !ellipse(24403.633200, 27793.832000, 816.712024, 816.712024, 0.000000, X, Y) && !ellipse(24935.896200, 26013.768000, 2251.424065, 2251.424065, 0.000000, X, Y) && !ellipse(25824.442800, 25047.288800, 1094.568031, 1094.568031, 0.000000, X, Y) && !ellipse(24783.391600, 29246.914000, 2417.072070, 2417.072070, 0.000000, X, Y) && !ellipse(25886.481000, 27554.325200, 793.294423, 793.294423, 0.000000, X, Y) && !ellipse(24841.007200, 26501.082000, 1125.712032, 1125.712032, 0.000000, X, Y) && !ellipse(25921.880702, 29072.923000, 1745.016050, 1745.016050, 0.000000, X, Y) && !ellipse(24505.550781, 27357.591217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24521.916382, 28311.115784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26888.168000, 28224.400000, 1214.032035, 1214.032035, 0.000000, X, Y) && !ellipse(26761.454200, 25794.850160, 818.728024, 818.728024, 0.000000, X, Y) && !ellipse(26524.270447, 25012.188782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26498.941200, 27834.482000, 1147.184033, 1147.184033, 0.000000, X, Y) && !ellipse(27191.204800, 24534.620000, 1143.528033, 1143.528033, 0.000000, X, Y) && !ellipse(23571.462000, 23599.626000, 2292.224066, 2292.224066, 0.000000, X, Y) && !ellipse(26953.056000, 26852.868000, 1116.272032, 1116.272032, 0.000000, X, Y) && !ellipse(26352.301544, 23802.613190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23915.605927, 21083.533966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25509.313812, 23269.284180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26159.963257, 26391.333130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25165.768951, 21012.045975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25571.328000, 21131.223200, 1359.264039, 1359.264039, 0.000000, X, Y) && !ellipse(23781.090000, 23300.502000, 1222.096035, 1222.096035, 0.000000, X, Y) && !ellipse(26496.761688, 23006.393799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25127.363953, 21610.039551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.923096, 22290.720032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24527.263611, 21606.807053, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 10:26:50 2012] Writing fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src1.gif
[Wed Jul 18 10:27:11 2012] Mean detx,y = (-124.90, -251.89) 
[Wed Jul 18 10:27:13 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 10:27:28 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 10:27:28 2012] Setting source spectrum file to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 18 10:27:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 18 18:35:43 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:43 2012] Error reading totcts from fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 18 18:35:45 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:45 2012] Using photon index=1.80, rate=0.117, arf fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src1.arf
[Wed Jul 18 18:35:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:45 2012] Updating source flux to 1.1e-12
[Wed Jul 18 18:35:55 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Jul 18 18:46:06 2012] Reading fit data from xmm0018140301/analysis//spectral/fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul 18 18:46:06 2012] Spectral fit parameter nH value = 6.98949e+20
[Wed Jul 18 18:46:06 2012] Spectral fit parameter PhoIndex value = 6.125
[Wed Jul 18 18:46:06 2012] Failed to get F(0.3-8.0) from xmm0018140301/analysis//spectral/fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul 18 18:46:06 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:46:06 2012] Using Nh = 7e+20, photon index=6.12, rate=0.117, arf fullrun_mos1_xmm0018140301_pi300-10000_pass1_cl_src1.arf
[Wed Jul 18 18:46:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:46:07 2012] Updating source flux to 8.8e-13