[Thu Aug 23 03:47:12 2012] Detection parameters:
  Position = (319.8, 326.2) = 20 57 8.27 31 3 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.4 +/- 21.9
  Background counts = 152.3
  Rate = 0.06 +/- 0.009

[Thu Aug 23 03:47:13 2012] Off-axis axis estimate = 2.54'
[Thu Aug 23 03:52:55 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 03:52:55 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Thu Aug 23 03:52:55 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.777
[Thu Aug 23 03:52:55 2012] Giving source the simple spatial ID 91 for pass 0, mean size = 7.70"
[Thu Aug 23 09:47:38 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src91.ximg exists
[Thu Aug 23 09:47:38 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src91_1.ximg exists
[Thu Aug 23 09:47:38 2012] Fit fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src91 appears to have run properly
[Thu Aug 23 09:47:41 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src91.ximg exists
[Thu Aug 23 09:47:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src91.csv
[Thu Aug 23 09:47:41 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists
[Thu Aug 23 09:47:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src91.csv
[Thu Aug 23 09:47:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src91_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:57:56 2012] Spatial fit model total counts = 2032.330000, observed total counts = 1897.000000
[Thu Aug 23 22:57:56 2012] Offset between fit and detection position for source 91 = 6.997314 pixels
[Thu Aug 23 22:57:56 2012] 1976.359000 total counts/ 1840.840000 bgd. counts: snr = 3.158582
Spatial fit parameters:
  Offset between fit and detection position for source 91 = 6.997314 pixels
  Position = (313.0, 324.4) = 20 57 10.57 31 3 11.9
  Extent = 15.2" x 15.2", rotation angle = 343
  Source counts = 135.5 +/- 44.5
  Background counts = 1840.8
  Rate = 0.1 +/- 0.03
[Thu Aug 23 22:57:56 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:57:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:57:56 2012] Assessing source extent using major
[Thu Aug 23 22:57:56 2012] Source does appear to be extended
[Thu Aug 23 22:57:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:57:56 2012] Source is confused with source 88
[Thu Aug 23 22:59:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 23 22:59:09 2012] Initial guess for spatial extent in simple fitting = 15.22"
[Thu Aug 23 22:59:09 2012] source mask rpix=3.5, npix_max = 63, mask sum = 33, frac = 0.516
[Thu Aug 23 22:59:09 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 15.22"
[Fri Aug 24 05:06:25 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_src73.ximg exists
[Fri Aug 24 05:06:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_src73.csv
[Fri Aug 24 05:06:25 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_src73_1.ximg exists
[Fri Aug 24 05:06:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_src73.csv
[Fri Aug 24 05:06:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 05:06:29 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Fri Aug 24 05:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src73.csv
[Fri Aug 24 05:06:29 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Fri Aug 24 05:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src73.csv
[Fri Aug 24 05:06:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:14:58 2012] Source 91 is offset by 3.687103 and 6.699034 pixels which is larger than
2 X fitted extent = 0.835444 x 0.835444, not incorporating fit results
[Fri Aug 24 19:14:59 2012] Warning, spatial fit 73 centroid is now closest to src. 88
[Fri Aug 24 19:14:59 2012] Source 91 is offset by 2.768414 and -3.795885 pixels which is larger than
2 X fitted extent = 1.279389 x 1.279389, not incorporating fit results
[Fri Aug 24 19:14:59 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:14:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:14:59 2012] Assessing source extent using major
[Fri Aug 24 19:14:59 2012] Source does appear to be extended
[Fri Aug 24 19:14:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 19:16:17 2012] XMMSAS src. selection expression = ellipse(27182.808000, 28177.714000, 913.038026, 913.038026, 343.081000, X, Y)
[Fri Aug 24 19:16:17 2012] Writing source region out to fullrun_pn_xmm0018140101_pi300-10000_pass1_cl_src91_src.reg
[Fri Aug 24 19:16:17 2012] Extracting stamp from image fullrun_pn_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (261, 272) - (365, 377)
[Fri Aug 24 19:16:17 2012] XMMSAS bgd. selection expression = annulus(27182.808000, 28177.714000, 1521.730044, 3043.460088, X, Y) && !ellipse(27939.634705, 29192.091675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27487.002655, 27177.513855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27382.604000, 25548.492000, 1165.792034, 1165.792034, 0.000000, X, Y) && !ellipse(27147.283691, 24580.637665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24630.946000, 24644.198000, 1117.424032, 1117.424032, 0.000000, X, Y) && !ellipse(28156.271820, 31790.523712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28096.791199, 31107.405914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27980.264618, 30566.847260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23968.098511, 30306.131348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28142.824097, 30132.776520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.326000, 29861.408000, 1001.304029, 1001.304029, 0.000000, X, Y) && !ellipse(26062.151978, 29345.241730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25208.095428, 29002.549133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23933.492859, 29099.611694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28024.829285, 28746.976013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26360.109985, 28407.203949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25815.886000, 28980.146000, 1257.432036, 1257.432036, 0.000000, X, Y) && !ellipse(25575.262000, 28492.172000, 1239.712036, 1239.712036, 0.000000, X, Y) && !ellipse(26029.584000, 27567.379600, 890.456026, 890.456026, 0.000000, X, Y) && !ellipse(24066.617400, 27507.011400, 1168.808034, 1168.808034, 0.000000, X, Y) && !ellipse(27349.689850, 26105.843140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25724.960602, 26069.471893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24014.457977, 26056.488800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27973.157104, 25968.060394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24755.949249, 26667.875671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24730.033508, 25876.480469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24158.912811, 25353.853882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25551.232000, 24953.181200, 1089.216031, 1089.216031, 0.000000, X, Y)
[Fri Aug 24 19:16:17 2012] Writing fullrun_pn_xmm0018140101_pi300-10000_pass1_cl_src91.gif
[Fri Aug 24 19:46:28 2012] Mean detx,y = (-2044.18, 3871.74) 
[Fri Aug 24 19:46:30 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 19:46:48 2012] grppha failed
[Fri Aug 24 19:46:49 2012] Setting source spectrum file to fullrun_pn_xmm0018140101_pi300-10000_pass1_cl_src91_src.pi.gz
[Fri Aug 24 19:46:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0018140101_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Fri Aug 24 21:41:36 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:36 2012] Error reading totcts from fullrun_pn_xmm0018140101_pi300-10000_pass1_cl_src91_src.pi.gz
[Fri Aug 24 21:41:36 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:45 2012] Flag b found in src. 91 procflags, skipping spectral fitting
[Fri Aug 24 21:41:45 2012] Flag c found in src. 91 procflags, skipping spectral fitting
[Fri Aug 24 21:41:45 2012] Source 91 has no response, skipping
[Fri Aug 24 21:41:46 2012] xmm0018140101/analysis//spectral/fullrun_pn_xmm0018140101_pi300-10000_pass1_cl_src91_pl.csv not found, spectral fit skipped or did not complete