[Thu Aug 23 03:47:11 2012] Detection parameters:
  Position = (278.8, 395.3) = 20 57 22.15 31 8 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.6 +/- 15.8
  Background counts = 69.5
  Rate = 0.03 +/- 0.006

[Thu Aug 23 03:47:13 2012] Off-axis axis estimate = 7.17'
[Thu Aug 23 03:52:55 2012] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 03:52:55 2012] Initial guess for spatial extent in simple fitting = 10.01"
[Thu Aug 23 03:52:55 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.955
[Thu Aug 23 03:52:55 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 10.01"
[Thu Aug 23 09:47:37 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src61.ximg exists
[Thu Aug 23 09:47:37 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src61_1.ximg exists
[Thu Aug 23 09:47:37 2012] Fit fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src61 appears to have run properly
[Thu Aug 23 09:47:40 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Thu Aug 23 09:47:40 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Thu Aug 23 09:47:40 2012] Fit fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Thu Aug 23 22:57:55 2012] Spatial fit model total counts = 1078.590000, observed total counts = 1081.000000
[Thu Aug 23 22:57:55 2012] Offset between fit and detection position for source 61 = 3.615523 pixels
[Thu Aug 23 22:57:55 2012] 1086.382000 total counts/ 943.176000 bgd. counts: snr = 4.662994
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 3.615523 pixels
  Position = (281.0, 398.2) = 20 57 21.41 31 8 33.0
  Extent = 20.0 (20.0-40.1)", rotation angle = 0
  Source counts = 143.2 +/- 33.0
  Background counts = 943.2
  Rate = 0.1 +/- 0.02
[Thu Aug 23 22:57:56 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:57:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:57:56 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 22:57:56 2012] Source does appear to be extended
[Thu Aug 23 22:57:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:57:56 2012] Source is confused with source 60
[Thu Aug 23 22:59:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 23 22:59:09 2012] Initial guess for spatial extent in simple fitting = 20.03"
[Thu Aug 23 22:59:09 2012] source mask rpix=4.6, npix_max = 104, mask sum = 100, frac = 0.960
[Thu Aug 23 22:59:09 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 20.03"
[Fri Aug 24 05:06:25 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_src49.ximg exists
[Fri Aug 24 05:06:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_src49.csv
[Fri Aug 24 05:06:25 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_src49_1.ximg exists
[Fri Aug 24 05:06:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_src49.csv
[Fri Aug 24 05:06:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 05:06:28 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Fri Aug 24 05:06:28 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Fri Aug 24 05:06:28 2012] Fit fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Fri Aug 24 19:14:59 2012] Spatial fit model total counts = 3325.330000, observed total counts = 3321.000000
[Fri Aug 24 19:14:59 2012] Offset between fit and detection position for source 61 = 2.708404 pixels
[Fri Aug 24 19:14:59 2012] 3294.287000 total counts/ 2940.900000 bgd. counts: snr = 6.516441
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 2.708404 pixels
  Position = (282.6, 400.4) = 20 57 20.87 31 8 42.4
  Extent = 28.0 (13.5-40.1)", rotation angle = 0
  Source counts = 353.4 +/- 57.4
  Background counts = 2940.9
  Rate = 0.3 +/- 0.04
[Fri Aug 24 19:14:59 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:14:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:14:59 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 19:14:59 2012] Source does appear to be extended
[Fri Aug 24 19:14:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 19:16:16 2012] XMMSAS src. selection expression = ellipse(24537.648200, 34787.814800, 1680.162048, 1680.162048, 0.000000, X, Y)
[Fri Aug 24 19:16:16 2012] Writing source region out to fullrun_pn_xmm0018140101_pi300-10000_pass1_cl_src61_src.reg
[Fri Aug 24 19:16:16 2012] Extracting stamp from image fullrun_pn_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (186, 304) - (379, 497)
[Fri Aug 24 19:16:16 2012] XMMSAS bgd. selection expression = annulus(24537.648200, 34787.814800, 2800.270081, 5600.540161, X, Y) && !ellipse(26694.333038, 38581.175323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27276.930200, 38283.930400, 870.640025, 870.640025, 0.000000, X, Y) && !ellipse(30783.518890, 38034.541962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28948.028107, 37538.558594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30826.525055, 37450.504547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29515.184845, 37552.147034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29542.226318, 37196.914734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28735.137238, 36577.716766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27939.634705, 29192.091675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29139.376068, 38271.293579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28284.286713, 38238.711060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26264.146606, 38065.167725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27830.858154, 38239.451813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26707.544464, 37894.337830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25181.096436, 36730.266785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20160.495400, 36669.453600, 1198.256034, 1198.256034, 0.000000, X, Y) && !ellipse(24424.928162, 36309.134003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19987.365295, 35620.244171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21136.001328, 34208.517303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20660.970123, 34315.615875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24480.054000, 32803.900400, 1273.560037, 1273.560037, 0.000000, X, Y) && !ellipse(28156.271820, 31790.523712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28096.791199, 31107.405914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27980.264618, 30566.847260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23968.098511, 30306.131348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28142.824097, 30132.776520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.326000, 29861.408000, 1001.304029, 1001.304029, 0.000000, X, Y) && !ellipse(26062.151978, 29345.241730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25208.095428, 29002.549133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23933.492859, 29099.611694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28024.829285, 28746.976013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26360.109985, 28407.203949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25815.886000, 28980.146000, 1257.432036, 1257.432036, 0.000000, X, Y) && !ellipse(27182.808000, 28177.714000, 1217.384035, 1217.384035, 343.081000, X, Y) && !ellipse(25575.262000, 28492.172000, 1239.712036, 1239.712036, 0.000000, X, Y) && !ellipse(25540.385620, 38498.311859, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 19:16:16 2012] Writing fullrun_pn_xmm0018140101_pi300-10000_pass1_cl_src61.gif
[Fri Aug 24 19:35:27 2012] Mean detx,y = (1397.07, 10158.60) 
[Fri Aug 24 19:35:29 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 19:36:47 2012] grppha failed
[Fri Aug 24 19:36:48 2012] Setting source spectrum file to fullrun_pn_xmm0018140101_pi300-10000_pass1_cl_src61_src.pi.gz
[Fri Aug 24 19:36:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0018140101_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Fri Aug 24 21:41:35 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:35 2012] Error reading totcts from fullrun_pn_xmm0018140101_pi300-10000_pass1_cl_src61_src.pi.gz
[Fri Aug 24 21:41:36 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:45 2012] Flag c found in src. 61 procflags, skipping spectral fitting
[Fri Aug 24 21:41:45 2012] Source 61 has no response, skipping
[Fri Aug 24 21:41:46 2012] xmm0018140101/analysis//spectral/fullrun_pn_xmm0018140101_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete