[Thu Aug 23 03:47:10 2012] Detection parameters:
  Position = (312.9, 439.0) = 20 57 10.58 31 11 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.1 +/- 18.9
  Background counts = 61.0
  Rate = 0.05 +/- 0.007

[Thu Aug 23 03:47:12 2012] Off-axis axis estimate = 10.25'
[Thu Aug 23 03:52:55 2012] Using EEF radius (= 11.55 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 03:52:55 2012] Initial guess for spatial extent in simple fitting = 11.55"
[Thu Aug 23 03:52:55 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.904
[Thu Aug 23 03:52:55 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.55"
[Thu Aug 23 09:47:36 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Aug 23 09:47:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src3.csv
[Thu Aug 23 09:47:36 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Aug 23 09:47:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src3.csv
[Thu Aug 23 09:47:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 09:47:38 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Aug 23 09:47:38 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Aug 23 09:47:38 2012] Fit fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Aug 23 22:57:55 2012] Spatial fit model total counts = 1170.660000, observed total counts = 1118.000000
[Thu Aug 23 22:57:55 2012] Offset between fit and detection position for source 3 = 1.927339 pixels
[Thu Aug 23 22:57:55 2012] 1046.244000 total counts/ 944.219000 bgd. counts: snr = 3.320246
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.927339 pixels
  Position = (314.1, 440.6) = 20 57 10.19 31 11 37.2
  Extent = 10.9 (6.3-21.8)", rotation angle = 0
  Source counts = 102.0 +/- 32.3
  Background counts = 944.2
  Rate = 0.08 +/- 0.02
[Thu Aug 23 22:57:56 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:57:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:57:56 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 22:57:56 2012] Source does appear to be extended
[Thu Aug 23 22:57:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:57:56 2012] Source is confused with source 43
[Thu Aug 23 22:59:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 23 22:59:09 2012] Initial guess for spatial extent in simple fitting = 10.88"
[Thu Aug 23 22:59:09 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.999
[Thu Aug 23 22:59:09 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.88"
[Fri Aug 24 05:06:24 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 24 05:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_src3.csv
[Fri Aug 24 05:06:24 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 24 05:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_src3.csv
[Fri Aug 24 05:06:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 05:06:26 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 24 05:06:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Aug 24 05:06:26 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 24 05:06:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Aug 24 05:06:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:14:58 2012] Spatial fit model total counts = 1050.030000, observed total counts = 945.000000
[Fri Aug 24 19:14:58 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 24 19:14:59 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:14:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:14:59 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 19:14:59 2012] Source does appear to be extended
[Fri Aug 24 19:14:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 19:16:14 2012] XMMSAS src. selection expression = ellipse(27276.930200, 38283.930400, 652.980019, 652.980019, 0.000000, X, Y)
[Fri Aug 24 19:16:14 2012] Writing source region out to fullrun_pn_xmm0018140101_pi300-10000_pass1_cl_src3_src.reg
[Fri Aug 24 19:16:14 2012] Extracting stamp from image fullrun_pn_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (277, 403) - (352, 478)
[Fri Aug 24 19:16:14 2012] XMMSAS bgd. selection expression = annulus(27276.930200, 38283.930400, 1088.300031, 2176.600063, X, Y) && !ellipse(26694.333038, 38581.175323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28948.028107, 37538.558594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29515.184845, 37552.147034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29542.226318, 37196.914734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28735.137238, 36577.716766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29139.376068, 38271.293579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28284.286713, 38238.711060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26264.146606, 38065.167725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27830.858154, 38239.451813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26707.544464, 37894.337830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25181.096436, 36730.266785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24424.928162, 36309.134003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24537.648200, 34787.814800, 2240.216064, 2240.216064, 0.000000, X, Y) && !ellipse(25540.385620, 38498.311859, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 19:16:14 2012] Writing fullrun_pn_xmm0018140101_pi300-10000_pass1_cl_src3.gif
[Fri Aug 24 19:17:15 2012] Mean detx,y = (-785.53, 13850.14) 
[Fri Aug 24 19:17:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 19:17:33 2012] grppha failed
[Fri Aug 24 19:17:33 2012] Setting source spectrum file to fullrun_pn_xmm0018140101_pi300-10000_pass1_cl_src3_src.pi.gz
[Fri Aug 24 19:17:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0018140101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Aug 24 21:41:35 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:35 2012] Error reading totcts from fullrun_pn_xmm0018140101_pi300-10000_pass1_cl_src3_src.pi.gz
[Fri Aug 24 21:41:36 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:45 2012] Flag p found in src. 3 procflags, skipping spectral fitting
[Fri Aug 24 21:41:45 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Fri Aug 24 21:41:45 2012] Source 3 has no response, skipping
[Fri Aug 24 21:41:46 2012] xmm0018140101/analysis//spectral/fullrun_pn_xmm0018140101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete