[Thu Aug 23 03:47:10 2012] Detection parameters:
  Position = (314.4, 291.0) = 20 57 10.11 31 0 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 252.1 +/- 25.2
  Background counts = 201.5
  Rate = 0.1 +/- 0.01

[Thu Aug 23 03:47:13 2012] Off-axis axis estimate = 1.27'
[Thu Aug 23 03:52:55 2012] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 03:52:55 2012] Initial guess for spatial extent in simple fitting = 7.07"
[Thu Aug 23 03:52:55 2012] source mask rpix=1.6, npix_max = 18, mask sum = 11, frac = 0.609
[Thu Aug 23 03:52:55 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.07"
[Thu Aug 23 09:47:36 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src20.ximg exists
[Thu Aug 23 09:47:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src20.csv
[Thu Aug 23 09:47:36 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu Aug 23 09:47:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src20.csv
[Thu Aug 23 09:47:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 09:47:39 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu Aug 23 09:47:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu Aug 23 09:47:39 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Aug 23 09:47:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu Aug 23 09:47:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:57:55 2012] Spatial fit model total counts = 2400.680000, observed total counts = 2371.000000
[Thu Aug 23 22:57:55 2012] Offset between fit and detection position for source 20 = 4.020207 pixels
[Thu Aug 23 22:57:55 2012] Warning, changing simple spatial fit ID from 20 to 19
[Thu Aug 23 22:57:55 2012] 2398.876200 total counts/ 2343.440000 bgd. counts: snr = 1.145161
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 4.020207 pixels
  Position = (318.4, 291.1) = 20 57 8.75 31 0 46.9
  Extent = 14.1" x 14.1", rotation angle = -0
  Source counts = 55.4 +/- 49.0
  Background counts = 2343.4
  Rate = 0.04 +/- 0.04
  Deleting source due to low Poisson probability