[Thu Aug 23 03:47:10 2012] Detection parameters:
  Position = (343.0, 424.0) = 20 57 0.40 31 10 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.0 +/- 17.2
  Background counts = 95.1
  Rate = 0.03 +/- 0.007

[Thu Aug 23 03:47:12 2012] Off-axis axis estimate = 9.66'
[Thu Aug 23 03:52:55 2012] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 03:52:55 2012] Initial guess for spatial extent in simple fitting = 11.26"
[Thu Aug 23 03:52:55 2012] source mask rpix=2.6, npix_max = 38, mask sum = 34, frac = 0.891
[Thu Aug 23 03:52:55 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.26"
[Thu Aug 23 09:47:36 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src11.ximg exists
[Thu Aug 23 09:47:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src11.csv
[Thu Aug 23 09:47:36 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Aug 23 09:47:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src11.csv
[Thu Aug 23 09:47:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 09:47:38 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Aug 23 09:47:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu Aug 23 09:47:39 2012] fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Aug 23 09:47:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu Aug 23 09:47:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:57:55 2012] Source 11 is offset by -0.093822 and -3.076214 pixels which is larger than
2 X fitted extent = 1.364405 x 1.364405, not incorporating fit results
[Thu Aug 23 22:57:55 2012] Spatial fit model total counts = 1596.750000, observed total counts = 1464.000000
[Thu Aug 23 22:57:55 2012] Offset between fit and detection position for source 11 = 0.667248 pixels
[Thu Aug 23 22:57:55 2012] Warning, changing simple spatial fit ID from 11 to 9
[Thu Aug 23 22:57:55 2012] 1450.531100 total counts/ 1430.830000 bgd. counts: snr = 0.520831
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.667248 pixels
  Position = (343.2, 423.4) = 20 57 0.34 31 10 22.2
  Extent = 3.0 (2.8-4.6)", rotation angle = 0
  Source counts = 19.7 +/- 38.1
  Background counts = 1430.8
  Rate = 0.01 +/- 0.03
  Deleting source due to low Poisson probability