[Thu Aug 23 03:49:33 2012] Detection parameters:
  Position = (317.8, 349.6) = 20 57 8.93 31 5 3.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.3 +/- 21.5
  Background counts = 153.4
  Rate = 0.03 +/- 0.005

[Thu Aug 23 03:49:35 2012] Off-axis axis estimate = 3.97'
[Thu Aug 23 17:02:17 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 17:02:17 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Thu Aug 23 17:02:17 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.055
[Thu Aug 23 17:02:17 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 8.41"
[Thu Aug 23 22:57:26 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src73.ximg exists
[Thu Aug 23 22:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src73.csv
[Thu Aug 23 22:57:26 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src73_1.ximg exists
[Thu Aug 23 22:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src73.csv
[Thu Aug 23 22:57:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:57:28 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Thu Aug 23 22:57:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src73.csv
[Thu Aug 23 22:57:29 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Thu Aug 23 22:57:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src73.csv
[Thu Aug 23 22:57:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:58:41 2012] Warning, spatial fit 73 centroid is now closest to src. 86
[Thu Aug 23 22:58:41 2012] Source 95 is offset by 2.645064 and 1.372649 pixels which is larger than
2 X fitted extent = 0.917195 x 0.917195, not incorporating fit results
[Thu Aug 23 22:58:42 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:42 2012] Assessing source extent using major
[Thu Aug 23 22:58:42 2012] Source does appear to be extended
[Thu Aug 23 22:58:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:58:42 2012] Source is confused with source 102
[Thu Aug 23 22:58:42 2012] Source is confused with source 92
[Fri Aug 24 11:03:10 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 11:03:10 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Fri Aug 24 11:03:10 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.055
[Fri Aug 24 11:03:10 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 8.41"
[Fri Aug 24 19:14:28 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src56.ximg exists
[Fri Aug 24 19:14:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src56.csv
[Fri Aug 24 19:14:28 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src56_1.ximg exists
[Fri Aug 24 19:14:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src56.csv
[Fri Aug 24 19:14:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:14:31 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Fri Aug 24 19:14:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src56.csv
[Fri Aug 24 19:14:31 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Fri Aug 24 19:14:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src56.csv
[Fri Aug 24 19:14:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:15:48 2012] Spatial fit model total counts = 2444.400000, observed total counts = 1959.000000
[Fri Aug 24 19:15:48 2012] Poor agreement between spatial fit and data for source 95
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 24 19:15:48 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:48 2012] Assessing source extent using major
[Fri Aug 24 19:15:48 2012] Source does appear to be extended
[Fri Aug 24 19:15:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 21:09:13 2012] XMMSAS src. selection expression = ellipse(27602.010559, 30370.518463, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 24 21:09:13 2012] Writing source region out to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src95_src.reg
[Fri Aug 24 21:09:13 2012] Extracting stamp from image fullrun_mos2_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (280, 312) - (355, 387)
[Fri Aug 24 21:09:13 2012] XMMSAS bgd. selection expression = annulus(27602.010559, 30370.518463, 1087.500000, 2175.000000, X, Y) && !ellipse(25019.237000, 29224.550000, 1031.312030, 1031.312030, 0.000000, X, Y) && !ellipse(26200.130000, 28048.272000, 2265.424065, 2265.424065, 0.000000, X, Y) && !ellipse(25701.569794, 29523.848206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25092.012238, 28484.648499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25916.425385, 29009.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26305.176220, 27708.756400, 1151.304033, 1151.304033, 0.000000, X, Y) && !ellipse(24922.616058, 27968.239990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24843.435120, 29620.199219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.813446, 29099.014313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27170.087738, 31712.696838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24975.112000, 30453.168000, 1472.240042, 1472.240042, 190.629000, X, Y) && !ellipse(26985.735779, 29013.681671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27634.481567, 32180.443970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26076.722000, 31084.804000, 927.912027, 927.912027, 0.000000, X, Y) && !ellipse(25987.312012, 30623.062195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25972.250031, 32043.983429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25099.536591, 33360.856720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26094.678741, 32729.859802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26833.686000, 31296.404000, 3033.600087, 3033.600087, 0.000000, X, Y) && !ellipse(26769.950928, 29538.549103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24959.078000, 32624.389200, 1472.240042, 655.961619, 6.636000, X, Y) && !ellipse(27794.266541, 31275.899384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27605.130219, 29970.373688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26895.472748, 33182.574158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26562.707306, 31711.791473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26997.906433, 30404.489563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27529.711456, 29188.648102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28784.401306, 32909.353058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27356.661957, 27646.822144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24789.471649, 31656.975739, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 21:09:13 2012] Writing fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src95.gif
[Fri Aug 24 21:24:32 2012] Mean detx,y = (2240.86, -6165.07) 
[Fri Aug 24 21:24:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 21:24:43 2012] grppha failed
[Fri Aug 24 21:24:43 2012] Setting source spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src95_src.pi.gz
[Fri Aug 24 21:24:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src95_bgd.pi.gz
[Fri Aug 24 21:41:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 24 21:41:13 2012] rmf not generated due to insufficient counts
[Fri Aug 24 21:41:39 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:39 2012] Error reading totcts from fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src95_src.pi.gz
[Fri Aug 24 21:41:40 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 24 21:41:45 2012] xmm0018140101/analysis//spectral/fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src95_pl.csv not found, spectral fit skipped or did not complete