[Thu Aug 23 03:49:33 2012] Detection parameters:
  Position = (348.9, 146.0) = 20 56 58.45 30 50 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.3 +/- 20.1
  Background counts = 48.7
  Rate = 0.02 +/- 0.003

[Thu Aug 23 03:49:35 2012] Off-axis axis estimate = 11.64'
[Thu Aug 23 17:02:17 2012] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 17:02:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 23 17:02:17 2012] Initial guess for spatial extent in simple fitting = 12.25"
[Thu Aug 23 17:02:17 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.818
[Thu Aug 23 17:02:17 2012] Giving source the simple spatial ID 90 for pass 0, mean size = 12.25"
[Thu Aug 23 22:57:26 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src90.ximg exists
[Thu Aug 23 22:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src90.csv
[Thu Aug 23 22:57:26 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src90_1.ximg exists
[Thu Aug 23 22:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src90.csv
[Thu Aug 23 22:57:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:57:30 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Thu Aug 23 22:57:30 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Thu Aug 23 22:57:30 2012] Fit fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src90 appears to have run properly
[Thu Aug 23 22:58:42 2012] Warning, spatial fit 90 centroid is now closest to src. 16
[Thu Aug 23 22:58:42 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:42 2012] Assessing source extent using major
[Thu Aug 23 22:58:42 2012] Source does appear to be extended
[Thu Aug 23 22:58:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:58:42 2012] Source is confused with source 19
[Fri Aug 24 11:03:10 2012] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 11:03:10 2012] Initial guess for spatial extent in simple fitting = 12.25"
[Fri Aug 24 11:03:10 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.818
[Fri Aug 24 11:03:10 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 12.25"
[Fri Aug 24 19:14:29 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src71.ximg exists
[Fri Aug 24 19:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src71.csv
[Fri Aug 24 19:14:29 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src71_1.ximg exists
[Fri Aug 24 19:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src71.csv
[Fri Aug 24 19:14:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:14:32 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Fri Aug 24 19:14:32 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Fri Aug 24 19:14:32 2012] Fit fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Fri Aug 24 19:15:48 2012] Warning, spatial fit 71 centroid is now closest to src. 19
[Fri Aug 24 19:15:48 2012] Warning: source 98 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 81 at 12.411038 pixels away
[Fri Aug 24 19:15:48 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:48 2012] Assessing source extent using major
[Fri Aug 24 19:15:48 2012] Source does appear to be extended
[Fri Aug 24 19:15:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 21:09:14 2012] XMMSAS src. selection expression = ellipse(30306.532257, 12652.476486, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 24 21:09:14 2012] Writing source region out to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src81_src.reg
[Fri Aug 24 21:09:14 2012] Extracting stamp from image fullrun_mos2_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (311, 108) - (386, 183)
[Fri Aug 24 21:09:14 2012] XMMSAS bgd. selection expression = annulus(30306.532257, 12652.476486, 1087.500000, 2175.000000, X, Y) && !ellipse(30430.429199, 12134.927643, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 21:09:14 2012] Writing fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src81.gif
[Fri Aug 24 21:30:46 2012] Mean detx,y = (7379.84, 10906.99) 
[Fri Aug 24 21:30:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 21:30:55 2012] grppha failed
[Fri Aug 24 21:30:55 2012] Setting source spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src81_src.pi.gz
[Fri Aug 24 21:30:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Fri Aug 24 21:41:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 24 21:41:15 2012] rmf not generated due to insufficient counts
[Fri Aug 24 21:41:39 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:39 2012] Error reading totcts from fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src81_src.pi.gz
[Fri Aug 24 21:41:40 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 24 21:41:45 2012] xmm0018140101/analysis//spectral/fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src81_pl.csv not found, spectral fit skipped or did not complete