[Thu Aug 23 03:49:33 2012] Detection parameters:
  Position = (289.1, 376.6) = 20 57 18.67 31 7 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.6 +/- 17.0
  Background counts = 82.5
  Rate = 0.03 +/- 0.004

[Thu Aug 23 03:49:35 2012] Off-axis axis estimate = 5.71'
[Thu Aug 23 17:02:17 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 17:02:17 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Thu Aug 23 17:02:17 2012] source mask rpix=2.1, npix_max = 27, mask sum = 27, frac = 0.973
[Thu Aug 23 17:02:17 2012] Giving source the simple spatial ID 76 for pass 0, mean size = 9.28"
[Thu Aug 23 22:57:26 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src76.ximg exists
[Thu Aug 23 22:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src76.csv
[Thu Aug 23 22:57:26 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src76_1.ximg exists
[Thu Aug 23 22:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src76.csv
[Thu Aug 23 22:57:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:57:29 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Thu Aug 23 22:57:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src76.csv
[Thu Aug 23 22:57:29 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Thu Aug 23 22:57:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src76.csv
[Thu Aug 23 22:57:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:58:41 2012] Source 68 is offset by -3.408299 and -1.117162 pixels which is larger than
2 X fitted extent = 1.032602 x 1.032602, not incorporating fit results
[Thu Aug 23 22:58:41 2012] Spatial fit model total counts = 1427.850000, observed total counts = 1275.000000
[Thu Aug 23 22:58:41 2012] Poor agreement between spatial fit and data for source 68
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 23 22:58:42 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:42 2012] Assessing source extent using major
[Thu Aug 23 22:58:42 2012] Source does appear to be extended
[Thu Aug 23 22:58:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:58:42 2012] Source is confused with source 62
[Fri Aug 24 11:03:10 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 11:03:10 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Fri Aug 24 11:03:10 2012] source mask rpix=2.1, npix_max = 27, mask sum = 27, frac = 0.973
[Fri Aug 24 11:03:10 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 9.28"
[Fri Aug 24 19:14:28 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src59.ximg exists
[Fri Aug 24 19:14:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src59.csv
[Fri Aug 24 19:14:28 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src59_1.ximg exists
[Fri Aug 24 19:14:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src59.csv
[Fri Aug 24 19:14:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:14:31 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Fri Aug 24 19:14:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Fri Aug 24 19:14:31 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Fri Aug 24 19:14:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Fri Aug 24 19:14:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:15:48 2012] Spatial fit model total counts = 1360.310000, observed total counts = 1394.000000
[Fri Aug 24 19:15:48 2012] Offset between fit and detection position for source 68 = 1.928163 pixels
[Fri Aug 24 19:15:48 2012] Warning, changing simple spatial fit ID from 59 to 36
[Fri Aug 24 19:15:48 2012] 1327.711000 total counts/ 1194.720000 bgd. counts: snr = 3.847594
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 1.928163 pixels
  Position = (287.4, 375.6) = 20 57 19.22 31 6 54.2
  Extent = 18.4 (18.4-36.8)" x 8.2 (5.7-12.5)", rotation angle = 7
  Source counts = 133.0 +/- 36.4
  Background counts = 1194.7
  Rate = 0.02 +/- 0.006
[Fri Aug 24 19:15:48 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:48 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 19:15:48 2012] Source does appear to be extended
[Fri Aug 24 19:15:48 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.47
[Fri Aug 24 21:09:13 2012] XMMSAS src. selection expression = ellipse(24959.078000, 32624.389200, 1104.180032, 491.971214, 6.636000, X, Y)
[Fri Aug 24 21:09:13 2012] Writing source region out to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src68_src.reg
[Fri Aug 24 21:09:13 2012] Extracting stamp from image fullrun_mos2_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (224, 312) - (351, 439)
[Fri Aug 24 21:09:14 2012] XMMSAS bgd. selection expression = annulus(24959.078000, 32624.389200, 1840.300053, 3680.600106, X, Y) && !ellipse(25019.237000, 29224.550000, 1031.312030, 1031.312030, 0.000000, X, Y) && !ellipse(26200.130000, 28048.272000, 2265.424065, 2265.424065, 0.000000, X, Y) && !ellipse(25701.569794, 29523.848206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24138.458466, 28311.851227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25092.012238, 28484.648499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25916.425385, 29009.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20817.474000, 34392.432380, 1664.504048, 1664.504048, 0.000000, X, Y) && !ellipse(24161.578461, 29002.434967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24843.435120, 29620.199219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.813446, 29099.014313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25357.239044, 34846.701385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24614.996399, 34404.530151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24084.412689, 33438.272064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25129.357880, 36488.329895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27170.087738, 31712.696838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24975.112000, 30453.168000, 1472.240042, 1472.240042, 190.629000, X, Y) && !ellipse(26985.735779, 29013.681671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24499.715027, 32418.215118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24225.163200, 29897.210000, 813.864023, 813.864023, 0.000000, X, Y) && !ellipse(25888.792000, 36447.740000, 1064.280031, 1064.280031, 0.000000, X, Y) && !ellipse(27634.481567, 32180.443970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19865.414000, 35675.224000, 1740.016050, 1740.016050, 0.000000, X, Y) && !ellipse(26076.722000, 31084.804000, 927.912027, 927.912027, 0.000000, X, Y) && !ellipse(25987.312012, 30623.062195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24893.896606, 35875.456207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26500.043304, 33712.276398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25972.250031, 32043.983429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23890.059235, 35017.714478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25328.001862, 34224.877594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.059601, 34051.522766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24412.162781, 35792.390961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25099.536591, 33360.856720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24749.155029, 37000.806305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26094.678741, 32729.859802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20942.957400, 36070.039400, 1516.296044, 1516.296044, 0.000000, X, Y) && !ellipse(27602.010559, 30370.518463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26833.686000, 31296.404000, 3033.600087, 3033.600087, 0.000000, X, Y) && !ellipse(26769.950928, 29538.549103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27794.266541, 31275.899384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20472.050186, 35094.415619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27605.130219, 29970.373688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20950.190430, 35712.949829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26895.472748, 33182.574158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26392.196014, 34313.080322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25953.712616, 33529.076721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27238.021973, 33603.388336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26562.707306, 31711.791473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26297.775208, 34914.067444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24334.123505, 36418.818573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26763.236359, 34319.978088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23380.168823, 34581.663086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26997.906433, 30404.489563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.031281, 35952.773315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27529.711456, 29188.648102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28784.401306, 32909.353058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23175.442169, 34052.921967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24084.858734, 30482.393433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.994690, 35268.298798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24789.471649, 31656.975739, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 21:09:14 2012] Writing fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src68.gif
[Fri Aug 24 21:27:19 2012] Mean detx,y = (-756.59, -8127.69) 
[Fri Aug 24 21:27:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 21:27:44 2012] grppha failed
[Fri Aug 24 21:27:45 2012] Setting source spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src68_src.pi.gz
[Fri Aug 24 21:27:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Fri Aug 24 21:41:39 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:39 2012] Error reading totcts from fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src68_src.pi.gz
[Fri Aug 24 21:41:40 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:44 2012] Flag b found in src. 68 procflags, skipping spectral fitting
[Fri Aug 24 21:41:44 2012] Flag p found in src. 68 procflags, skipping spectral fitting
[Fri Aug 24 21:41:44 2012] Flag c found in src. 68 procflags, skipping spectral fitting
[Fri Aug 24 21:41:44 2012] Source 68 has no response, skipping
[Fri Aug 24 21:41:45 2012] xmm0018140101/analysis//spectral/fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src68_pl.csv not found, spectral fit skipped or did not complete