[Thu Aug 23 03:49:32 2012] Detection parameters:
  Position = (308.2, 395.0) = 20 57 12.20 31 8 17.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.3 +/- 18.9
  Background counts = 107.0
  Rate = 0.02 +/- 0.005

[Thu Aug 23 03:49:35 2012] Off-axis axis estimate = 7.04'
[Thu Aug 23 17:02:17 2012] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 17:02:17 2012] Initial guess for spatial extent in simple fitting = 9.95"
[Thu Aug 23 17:02:17 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.159
[Thu Aug 23 17:02:17 2012] Giving source the simple spatial ID 95 for pass 0, mean size = 9.95"
[Thu Aug 23 22:57:26 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src95.ximg exists
[Thu Aug 23 22:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src95.csv
[Thu Aug 23 22:57:26 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src95_1.ximg exists
[Thu Aug 23 22:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src95.csv
[Thu Aug 23 22:57:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src95_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:57:30 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src95.ximg exists
[Thu Aug 23 22:57:30 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists
[Thu Aug 23 22:57:30 2012] Fit fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src95 appears to have run properly
[Thu Aug 23 22:58:42 2012] Warning: source 95 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 13.511944 pixels away
[Thu Aug 23 22:58:42 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:42 2012] Assessing source extent using major
[Thu Aug 23 22:58:42 2012] Source does appear to be extended
[Thu Aug 23 22:58:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:58:42 2012] Source is confused with source 49
[Fri Aug 24 11:03:10 2012] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 11:03:10 2012] Initial guess for spatial extent in simple fitting = 9.95"
[Fri Aug 24 11:03:10 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.159
[Fri Aug 24 11:03:10 2012] Giving source the simple spatial ID 76 for pass 1, mean size = 9.95"
[Fri Aug 24 19:14:29 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src76.ximg exists
[Fri Aug 24 19:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src76.csv
[Fri Aug 24 19:14:29 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src76_1.ximg exists
[Fri Aug 24 19:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src76.csv
[Fri Aug 24 19:14:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:14:32 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src76.ximg exists
[Fri Aug 24 19:14:32 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src76_1.ximg exists
[Fri Aug 24 19:14:32 2012] Fit fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src76 appears to have run properly
[Fri Aug 24 19:15:48 2012] Warning, spatial fit 76 centroid is now closest to src. 58
[Fri Aug 24 19:15:48 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:48 2012] Assessing source extent using major
[Fri Aug 24 19:15:48 2012] Source does appear to be extended
[Fri Aug 24 19:15:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 21:09:14 2012] XMMSAS src. selection expression = ellipse(26763.236359, 34319.978088, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 24 21:09:14 2012] Writing source region out to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src50_src.reg
[Fri Aug 24 21:09:14 2012] Extracting stamp from image fullrun_mos2_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (271, 358) - (346, 433)
[Fri Aug 24 21:09:14 2012] XMMSAS bgd. selection expression = annulus(26763.236359, 34319.978088, 1087.500000, 2175.000000, X, Y) && !ellipse(25357.239044, 34846.701385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24614.996399, 34404.530151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24084.412689, 33438.272064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25129.357880, 36488.329895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27170.087738, 31712.696838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24499.715027, 32418.215118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25888.792000, 36447.740000, 1064.280031, 1064.280031, 0.000000, X, Y) && !ellipse(27634.481567, 32180.443970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24893.896606, 35875.456207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26500.043304, 33712.276398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25972.250031, 32043.983429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23890.059235, 35017.714478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25328.001862, 34224.877594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.059601, 34051.522766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24412.162781, 35792.390961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25099.536591, 33360.856720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24749.155029, 37000.806305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26094.678741, 32729.859802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26833.686000, 31296.404000, 3033.600087, 3033.600087, 0.000000, X, Y) && !ellipse(24959.078000, 32624.389200, 1472.240042, 655.961619, 6.636000, X, Y) && !ellipse(27794.266541, 31275.899384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26895.472748, 33182.574158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26392.196014, 34313.080322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25953.712616, 33529.076721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27238.021973, 33603.388336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26562.707306, 31711.791473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26297.775208, 34914.067444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24334.123505, 36418.818573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.031281, 35952.773315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28784.401306, 32909.353058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.994690, 35268.298798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24789.471649, 31656.975739, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 21:09:14 2012] Writing fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src50.gif
[Fri Aug 24 21:31:46 2012] Mean detx,y = (849.26, -10062.05) 
[Fri Aug 24 21:31:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 21:31:58 2012] grppha failed
[Fri Aug 24 21:31:58 2012] Setting source spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src50_src.pi.gz
[Fri Aug 24 21:31:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Fri Aug 24 21:41:15 2012] Not generating rmf since there are only 87 counts
[Fri Aug 24 21:41:15 2012] rmf not generated due to insufficient counts
[Fri Aug 24 21:41:39 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:39 2012] Error reading totcts from fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src50_src.pi.gz
[Fri Aug 24 21:41:40 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 24 21:41:45 2012] xmm0018140101/analysis//spectral/fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete