[Thu Aug 23 03:49:32 2012] Detection parameters:
  Position = (227.8, 410.0) = 20 57 39.45 31 9 27.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.2 +/- 17.1
  Background counts = 46.9
  Rate = 0.03 +/- 0.005

[Thu Aug 23 03:49:35 2012] Off-axis axis estimate = 9.57'
[Thu Aug 23 17:02:17 2012] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 17:02:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 23 17:02:17 2012] Initial guess for spatial extent in simple fitting = 11.22"
[Thu Aug 23 17:02:17 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.950
[Thu Aug 23 17:02:17 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 11.22"
[Thu Aug 23 22:57:25 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src49.ximg exists
[Thu Aug 23 22:57:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src49.csv
[Thu Aug 23 22:57:25 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src49_1.ximg exists
[Thu Aug 23 22:57:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src49.csv
[Thu Aug 23 22:57:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:57:28 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Thu Aug 23 22:57:28 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Thu Aug 23 22:57:28 2012] Fit fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Thu Aug 23 22:58:41 2012] Warning, spatial fit 49 centroid is now closest to src. 24
[Thu Aug 23 22:58:41 2012] Spatial fit model total counts = 1090.800000, observed total counts = 1092.000000
[Thu Aug 23 22:58:41 2012] Offset between fit and detection position for source 34 = 1.297143 pixels
[Thu Aug 23 22:58:41 2012] Warning, changing simple spatial fit ID from 49 to 78
[Thu Aug 23 22:58:41 2012] 1037.630000 total counts/ 843.078000 bgd. counts: snr = 6.700417
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 1.297143 pixels
  Position = (228.9, 410.6) = 20 57 39.07 31 9 26.7
  Extent = 21.8 (5.3-43.5)", rotation angle = 0
  Source counts = 194.6 +/- 32.2
  Background counts = 843.1
  Rate = 0.03 +/- 0.005
[Thu Aug 23 22:58:42 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:42 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 22:58:42 2012] Source does appear to be extended
[Thu Aug 23 22:58:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:58:42 2012] Source is confused with source 24
[Thu Aug 23 22:58:42 2012] Source is confused with source 37
[Thu Aug 23 22:58:42 2012] Source is confused with source 33
[Fri Aug 24 11:03:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 11:03:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 24 11:03:10 2012] Initial guess for spatial extent in simple fitting = 21.75"
[Fri Aug 24 11:03:10 2012] source mask rpix=5.0, npix_max = 121, mask sum = 121, frac = 1.000
[Fri Aug 24 11:03:10 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 21.75"
[Fri Aug 24 19:14:28 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src40.ximg exists
[Fri Aug 24 19:14:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src40.csv
[Fri Aug 24 19:14:28 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src40_1.ximg exists
[Fri Aug 24 19:14:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src40.csv
[Fri Aug 24 19:14:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:14:31 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Fri Aug 24 19:14:31 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Fri Aug 24 19:14:31 2012] Fit fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Fri Aug 24 19:15:48 2012] Warning, spatial fit 40 centroid is now closest to src. 24
[Fri Aug 24 19:15:48 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:48 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 19:15:48 2012] Source does appear to be extended
[Fri Aug 24 19:15:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 21:09:12 2012] XMMSAS src. selection expression = ellipse(19865.414000, 35675.224000, 1305.012038, 1305.012038, 0.000000, X, Y)
[Fri Aug 24 21:09:12 2012] Writing source region out to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src34_src.reg
[Fri Aug 24 21:09:12 2012] Extracting stamp from image fullrun_mos2_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (154, 336) - (304, 486)
[Fri Aug 24 21:09:12 2012] XMMSAS bgd. selection expression = annulus(19865.414000, 35675.224000, 2175.020063, 4350.040125, X, Y) && !ellipse(20817.474000, 34392.432380, 1664.504048, 1664.504048, 0.000000, X, Y) && !ellipse(24614.996399, 34404.530151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24084.412689, 33438.272064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24975.112000, 30453.168000, 1472.240042, 1472.240042, 190.629000, X, Y) && !ellipse(24499.715027, 32418.215118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24893.896606, 35875.456207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23890.059235, 35017.714478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.059601, 34051.522766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24412.162781, 35792.390961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24749.155029, 37000.806305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20942.957400, 36070.039400, 1516.296044, 1516.296044, 0.000000, X, Y) && !ellipse(26833.686000, 31296.404000, 3033.600087, 3033.600087, 0.000000, X, Y) && !ellipse(24959.078000, 32624.389200, 1472.240042, 655.961619, 6.636000, X, Y) && !ellipse(20472.050186, 35094.415619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20950.190430, 35712.949829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24334.123505, 36418.818573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23380.168823, 34581.663086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23175.442169, 34052.921967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24084.858734, 30482.393433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24789.471649, 31656.975739, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 21:09:12 2012] Writing fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src34.gif
[Fri Aug 24 21:19:50 2012] Mean detx,y = (-6019.73, -10555.73) 
[Fri Aug 24 21:19:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 21:20:17 2012] grppha failed
[Fri Aug 24 21:20:17 2012] Setting source spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src34_src.pi.gz
[Fri Aug 24 21:20:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Fri Aug 24 21:41:39 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:39 2012] Error reading totcts from fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src34_src.pi.gz
[Fri Aug 24 21:41:40 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:44 2012] Flag c found in src. 34 procflags, skipping spectral fitting
[Fri Aug 24 21:41:44 2012] Source 34 has no response, skipping
[Fri Aug 24 21:41:45 2012] xmm0018140101/analysis//spectral/fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete