[Thu Aug 23 03:49:32 2012] Detection parameters:
  Position = (296.3, 419.9) = 20 57 16.23 31 10 7.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.9 +/- 20.1
  Background counts = 142.4
  Rate = 0.03 +/- 0.006

[Thu Aug 23 03:49:35 2012] Off-axis axis estimate = 8.81'
[Thu Aug 23 17:02:17 2012] Using EEF radius (= 10.83 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 17:02:17 2012] Initial guess for spatial extent in simple fitting = 10.83"
[Thu Aug 23 17:02:17 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.006
[Thu Aug 23 17:02:17 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 10.83"
[Thu Aug 23 22:57:25 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src47.ximg exists
[Thu Aug 23 22:57:25 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src47_1.ximg exists
[Thu Aug 23 22:57:25 2012] Fit fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src47 appears to have run properly
[Thu Aug 23 22:57:28 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Thu Aug 23 22:57:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src47.csv
[Thu Aug 23 22:57:28 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Thu Aug 23 22:57:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src47.csv
[Thu Aug 23 22:57:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:58:41 2012] Spatial fit model total counts = 2224.170000, observed total counts = 2181.000000
[Thu Aug 23 22:58:41 2012] Offset between fit and detection position for source 20 = 1.904810 pixels
[Thu Aug 23 22:58:41 2012] Warning, changing simple spatial fit ID from 47 to 25
[Thu Aug 23 22:58:41 2012] 2075.182000 total counts/ 1880.660000 bgd. counts: snr = 4.485528
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.904810 pixels
  Position = (298.1, 419.5) = 20 57 15.60 31 10 5.4
  Extent = 13.3" x 13.3", rotation angle = 0
  Source counts = 194.5 +/- 45.6
  Background counts = 1880.7
  Rate = 0.03 +/- 0.008
[Thu Aug 23 22:58:42 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:42 2012] Assessing source extent using major
[Thu Aug 23 22:58:42 2012] Source does appear to be extended
[Thu Aug 23 22:58:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:58:42 2012] Source is confused with source 26
[Fri Aug 24 11:03:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 11:03:10 2012] Initial guess for spatial extent in simple fitting = 13.30"
[Fri Aug 24 11:03:10 2012] source mask rpix=3.1, npix_max = 50, mask sum = 33, frac = 0.652
[Fri Aug 24 11:03:10 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 13.30"
[Fri Aug 24 19:14:28 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src38.ximg exists
[Fri Aug 24 19:14:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src38.csv
[Fri Aug 24 19:14:28 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src38_1.ximg exists
[Fri Aug 24 19:14:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src38.csv
[Fri Aug 24 19:14:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:14:30 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Fri Aug 24 19:14:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Fri Aug 24 19:14:30 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Fri Aug 24 19:14:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Fri Aug 24 19:14:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:15:48 2012] Warning, spatial fit 38 centroid is now closest to src. 17
[Fri Aug 24 19:15:48 2012] Source 20 is offset by 1.657425 and 0.243586 pixels which is larger than
2 X fitted extent = 1.218428 x 1.218428, not incorporating fit results
[Fri Aug 24 19:15:48 2012] Source 20 is offset by 2.947770 and 2.529103 pixels which is larger than
2 X fitted extent = 1.272754 x 1.272754, not incorporating fit results
[Fri Aug 24 19:15:48 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:48 2012] Assessing source extent using major
[Fri Aug 24 19:15:48 2012] Source does appear to be extended
[Fri Aug 24 19:15:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 21:09:12 2012] XMMSAS src. selection expression = ellipse(25888.792000, 36447.740000, 798.210023, 798.210023, 0.000000, X, Y)
[Fri Aug 24 21:09:12 2012] Writing source region out to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src20_src.reg
[Fri Aug 24 21:09:12 2012] Extracting stamp from image fullrun_mos2_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (252, 374) - (344, 465)
[Fri Aug 24 21:09:12 2012] XMMSAS bgd. selection expression = annulus(25888.792000, 36447.740000, 1330.350038, 2660.700077, X, Y) && !ellipse(25357.239044, 34846.701385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24614.996399, 34404.530151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24084.412689, 33438.272064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25129.357880, 36488.329895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24893.896606, 35875.456207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26500.043304, 33712.276398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23890.059235, 35017.714478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25328.001862, 34224.877594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.059601, 34051.522766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24412.162781, 35792.390961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25099.536591, 33360.856720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24749.155029, 37000.806305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26833.686000, 31296.404000, 3033.600087, 3033.600087, 0.000000, X, Y) && !ellipse(24959.078000, 32624.389200, 1472.240042, 655.961619, 6.636000, X, Y) && !ellipse(26895.472748, 33182.574158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26392.196014, 34313.080322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25953.712616, 33529.076721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27238.021973, 33603.388336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26297.775208, 34914.067444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24334.123505, 36418.818573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26763.236359, 34319.978088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23380.168823, 34581.663086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.031281, 35952.773315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23175.442169, 34052.921967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.994690, 35268.298798, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 21:09:12 2012] Writing fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src20.gif
[Fri Aug 24 21:19:08 2012] Mean detx,y = (-377.89, -12023.51) 
[Fri Aug 24 21:19:09 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 21:19:29 2012] grppha failed
[Fri Aug 24 21:19:29 2012] Setting source spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src20_src.pi.gz
[Fri Aug 24 21:19:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Fri Aug 24 21:41:39 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:39 2012] Error reading totcts from fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src20_src.pi.gz
[Fri Aug 24 21:41:40 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:44 2012] Flag b found in src. 20 procflags, skipping spectral fitting
[Fri Aug 24 21:41:44 2012] Flag c found in src. 20 procflags, skipping spectral fitting
[Fri Aug 24 21:41:44 2012] Source 20 has no response, skipping
[Fri Aug 24 21:41:45 2012] xmm0018140101/analysis//spectral/fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete