[Thu Aug 23 03:49:34 2012] Detection parameters:
  Position = (274.9, 291.0) = 20 57 23.46 31 0 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.5 +/- 16.7
  Background counts = 41.0
  Rate = 0.03 +/- 0.003

[Thu Aug 23 03:49:35 2012] Off-axis axis estimate = 1.79'
[Thu Aug 23 17:02:17 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 17:02:17 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Thu Aug 23 17:02:17 2012] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.577
[Thu Aug 23 17:02:17 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 7.32"
[Thu Aug 23 22:57:26 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src81.ximg exists
[Thu Aug 23 22:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src81.csv
[Thu Aug 23 22:57:26 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src81_1.ximg exists
[Thu Aug 23 22:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src81.csv
[Thu Aug 23 22:57:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:57:29 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Thu Aug 23 22:57:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src81.csv
[Thu Aug 23 22:57:29 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Thu Aug 23 22:57:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src81.csv
[Thu Aug 23 22:57:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:58:42 2012] Warning, spatial fit 81 centroid is now closest to src. 152
[Thu Aug 23 22:58:42 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:42 2012] Assessing source extent using major
[Thu Aug 23 22:58:42 2012] Source does appear to be extended
[Thu Aug 23 22:58:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:58:42 2012] Source is confused with source 1
[Fri Aug 24 11:03:10 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 11:03:10 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Fri Aug 24 11:03:10 2012] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.577
[Fri Aug 24 11:03:10 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 7.32"
[Fri Aug 24 19:14:28 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src63.ximg exists
[Fri Aug 24 19:14:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src63.csv
[Fri Aug 24 19:14:28 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src63_1.ximg exists
[Fri Aug 24 19:14:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src63.csv
[Fri Aug 24 19:14:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:14:31 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Fri Aug 24 19:14:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src63.csv
[Fri Aug 24 19:14:31 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Fri Aug 24 19:14:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src63.csv
[Fri Aug 24 19:14:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:15:48 2012] Warning, spatial fit 63 centroid is now closest to src. 152
[Fri Aug 24 19:15:48 2012] Spatial fit model total counts = 1815.820000, observed total counts = 1548.000000
[Fri Aug 24 19:15:48 2012] Poor agreement between spatial fit and data for source 148
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 24 19:15:48 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:48 2012] Assessing source extent using major
[Fri Aug 24 19:15:48 2012] Source does appear to be extended
[Fri Aug 24 19:15:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 21:09:14 2012] XMMSAS src. selection expression = ellipse(23868.715454, 25268.988525, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 24 21:09:14 2012] Writing source region out to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src148_src.reg
[Fri Aug 24 21:09:14 2012] Extracting stamp from image fullrun_mos2_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (237, 254) - (312, 329)
[Fri Aug 24 21:09:14 2012] XMMSAS bgd. selection expression = annulus(23868.715454, 25268.988525, 1087.500000, 2175.000000, X, Y) && !ellipse(24525.994600, 25060.214000, 1123.792032, 1123.792032, 0.000000, X, Y) && !ellipse(25298.591200, 25242.099600, 1093.440031, 1093.440031, 0.000000, X, Y) && !ellipse(24855.589844, 26399.545135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24025.595825, 27705.556702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26088.321800, 25026.409800, 1087.744031, 1087.744031, 0.000000, X, Y) && !ellipse(24522.041168, 25601.915924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24725.506139, 26853.206000, 1180.592034, 701.624625, 0.000000, X, Y) && !ellipse(26200.130000, 28048.272000, 2265.424065, 2265.424065, 0.000000, X, Y) && !ellipse(24138.458466, 28311.851227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26305.176220, 27708.756400, 1151.304033, 1151.304033, 0.000000, X, Y) && !ellipse(24922.616058, 27968.239990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26335.704956, 25530.110657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26684.130000, 26093.172000, 1072.264031, 1072.264031, 0.000000, X, Y) && !ellipse(26234.468689, 26488.037262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23789.292908, 25789.897308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23870.319092, 24872.454590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25952.361206, 26132.789032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24677.222321, 23004.776886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25574.932000, 21777.585200, 1324.072038, 1324.072038, 0.000000, X, Y) && !ellipse(25939.272000, 23379.728000, 1167.544034, 1167.544034, 0.000000, X, Y) && !ellipse(25486.894745, 23097.941864, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 21:09:14 2012] Writing fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src148.gif
[Fri Aug 24 21:28:32 2012] Mean detx,y = (-579.53, -692.85) 
[Fri Aug 24 21:28:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 21:28:42 2012] grppha failed
[Fri Aug 24 21:28:43 2012] Setting source spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src148_src.pi.gz
[Fri Aug 24 21:28:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src148_bgd.pi.gz
[Fri Aug 24 21:41:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 24 21:41:14 2012] rmf not generated due to insufficient counts
[Fri Aug 24 21:41:39 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:39 2012] Error reading totcts from fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src148_src.pi.gz
[Fri Aug 24 21:41:40 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 24 21:41:45 2012] xmm0018140101/analysis//spectral/fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src148_pl.csv not found, spectral fit skipped or did not complete