[Thu Aug 23 03:49:34 2012] Detection parameters:
  Position = (287.0, 322.0) = 20 57 19.36 31 3 1.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 286.5 +/- 26.2
  Background counts = 69.5
  Rate = 0.05 +/- 0.005

[Thu Aug 23 03:49:35 2012] Off-axis axis estimate = 1.90'
[Thu Aug 23 17:02:17 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 17:02:17 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Thu Aug 23 17:02:17 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Thu Aug 23 17:02:17 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.38"
[Thu Aug 23 22:57:24 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src18.ximg exists
[Thu Aug 23 22:57:24 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Aug 23 22:57:24 2012] Fit fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src18 appears to have run properly
[Thu Aug 23 22:57:27 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Aug 23 22:57:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Aug 23 22:57:27 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Aug 23 22:57:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Aug 23 22:57:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:58:41 2012] Source 118 is offset by 3.695702 and 5.816483 pixels which is larger than
2 X fitted extent = 0.848124 x 3.762478, not incorporating fit results
[Thu Aug 23 22:58:42 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:42 2012] Assessing source extent using major
[Thu Aug 23 22:58:42 2012] Source does appear to be extended
[Thu Aug 23 22:58:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:58:42 2012] Source is confused with source 119
[Fri Aug 24 11:03:10 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 11:03:10 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Fri Aug 24 11:03:10 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Fri Aug 24 11:03:10 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 7.38"
[Fri Aug 24 19:14:27 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src16.ximg exists
[Fri Aug 24 19:14:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src16.csv
[Fri Aug 24 19:14:27 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri Aug 24 19:14:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src16.csv
[Fri Aug 24 19:14:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:14:30 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri Aug 24 19:14:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri Aug 24 19:14:30 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Aug 24 19:14:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri Aug 24 19:14:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:15:48 2012] Spatial fit model total counts = 2247.610000, observed total counts = 1916.000000
[Fri Aug 24 19:15:48 2012] Poor agreement between spatial fit and data for source 118
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 24 19:15:48 2012] Warning, spatial fit 16 centroid is now closest to src. 136
[Fri Aug 24 19:15:48 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:48 2012] Assessing source extent using major
[Fri Aug 24 19:15:48 2012] Source does appear to be extended
[Fri Aug 24 19:15:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 21:09:11 2012] XMMSAS src. selection expression = ellipse(24922.616058, 27968.239990, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 24 21:09:11 2012] Writing source region out to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src118_src.reg
[Fri Aug 24 21:09:11 2012] Extracting stamp from image fullrun_mos2_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (250, 285) - (325, 360)
[Fri Aug 24 21:09:11 2012] XMMSAS bgd. selection expression = annulus(24922.616058, 27968.239990, 1087.500000, 2175.000000, X, Y) && !ellipse(24525.994600, 25060.214000, 1123.792032, 1123.792032, 0.000000, X, Y) && !ellipse(25298.591200, 25242.099600, 1093.440031, 1093.440031, 0.000000, X, Y) && !ellipse(24855.589844, 26399.545135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25019.237000, 29224.550000, 1031.312030, 1031.312030, 0.000000, X, Y) && !ellipse(24025.595825, 27705.556702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26088.321800, 25026.409800, 1087.744031, 1087.744031, 0.000000, X, Y) && !ellipse(24522.041168, 25601.915924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24725.506139, 26853.206000, 1180.592034, 701.624625, 0.000000, X, Y) && !ellipse(26200.130000, 28048.272000, 2265.424065, 2265.424065, 0.000000, X, Y) && !ellipse(25701.569794, 29523.848206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24138.458466, 28311.851227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25092.012238, 28484.648499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25916.425385, 29009.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26305.176220, 27708.756400, 1151.304033, 1151.304033, 0.000000, X, Y) && !ellipse(24161.578461, 29002.434967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24843.435120, 29620.199219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26335.704956, 25530.110657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.813446, 29099.014313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26937.116882, 25272.121460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24975.112000, 30453.168000, 1472.240042, 1472.240042, 190.629000, X, Y) && !ellipse(26684.130000, 26093.172000, 1072.264031, 1072.264031, 0.000000, X, Y) && !ellipse(26985.735779, 29013.681671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24225.163200, 29897.210000, 813.864023, 813.864023, 0.000000, X, Y) && !ellipse(25987.312012, 30623.062195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26234.468689, 26488.037262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27602.010559, 30370.518463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26833.686000, 31296.404000, 3033.600087, 3033.600087, 0.000000, X, Y) && !ellipse(26769.950928, 29538.549103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27605.130219, 29970.373688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23868.715454, 25268.988525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26997.906433, 30404.489563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23789.292908, 25789.897308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25952.361206, 26132.789032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27529.711456, 29188.648102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24084.858734, 30482.393433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27356.661957, 27646.822144, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 21:09:11 2012] Writing fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src118.gif
[Fri Aug 24 21:13:57 2012] Mean detx,y = (-40.26, -3535.49) 
[Fri Aug 24 21:13:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 21:14:09 2012] grppha failed
[Fri Aug 24 21:14:10 2012] Setting source spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src118_src.pi.gz
[Fri Aug 24 21:14:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src118_bgd.pi.gz
[Fri Aug 24 21:41:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 24 21:41:09 2012] rmf not generated due to insufficient counts
[Fri Aug 24 21:41:38 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:38 2012] Error reading totcts from fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src118_src.pi.gz
[Fri Aug 24 21:41:40 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 24 21:41:45 2012] xmm0018140101/analysis//spectral/fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src118_pl.csv not found, spectral fit skipped or did not complete