[Thu Aug 23 03:49:34 2012] Detection parameters:
  Position = (278.3, 333.9) = 20 57 22.32 31 3 53.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 267.2 +/- 23.7
  Background counts = 51.5
  Rate = 0.05 +/- 0.004

[Thu Aug 23 03:49:35 2012] Off-axis axis estimate = 2.96'
[Thu Aug 23 17:02:17 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 17:02:17 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Thu Aug 23 17:02:17 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.931
[Thu Aug 23 17:02:17 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.91"
[Thu Aug 23 22:57:24 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src19.ximg exists
[Thu Aug 23 22:57:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src19.csv
[Thu Aug 23 22:57:24 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu Aug 23 22:57:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src19.csv
[Thu Aug 23 22:57:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:57:27 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu Aug 23 22:57:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu Aug 23 22:57:27 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Aug 23 22:57:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu Aug 23 22:57:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:58:41 2012] Warning, spatial fit 19 centroid is now closest to src. 120
[Thu Aug 23 22:58:42 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:42 2012] Assessing source extent using major
[Thu Aug 23 22:58:42 2012] Source does appear to be extended
[Thu Aug 23 22:58:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 11:03:10 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 11:03:10 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Fri Aug 24 11:03:10 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.931
[Fri Aug 24 11:03:10 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 7.91"
[Fri Aug 24 19:14:27 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src17.ximg exists
[Fri Aug 24 19:14:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src17.csv
[Fri Aug 24 19:14:27 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Aug 24 19:14:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src17.csv
[Fri Aug 24 19:14:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:14:30 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Aug 24 19:14:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri Aug 24 19:14:30 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Aug 24 19:14:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri Aug 24 19:14:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:15:48 2012] Warning, spatial fit 17 centroid is now closest to src. 120
[Fri Aug 24 19:15:48 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:48 2012] Assessing source extent using major
[Fri Aug 24 19:15:48 2012] Source does appear to be extended
[Fri Aug 24 19:15:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 21:09:11 2012] XMMSAS src. selection expression = ellipse(24161.578461, 29002.434967, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 24 21:09:11 2012] Writing source region out to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src114_src.reg
[Fri Aug 24 21:09:11 2012] Extracting stamp from image fullrun_mos2_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (241, 296) - (316, 371)
[Fri Aug 24 21:09:11 2012] XMMSAS bgd. selection expression = annulus(24161.578461, 29002.434967, 1087.500000, 2175.000000, X, Y) && !ellipse(24855.589844, 26399.545135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25019.237000, 29224.550000, 1031.312030, 1031.312030, 0.000000, X, Y) && !ellipse(24025.595825, 27705.556702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24725.506139, 26853.206000, 1180.592034, 701.624625, 0.000000, X, Y) && !ellipse(26200.130000, 28048.272000, 2265.424065, 2265.424065, 0.000000, X, Y) && !ellipse(25701.569794, 29523.848206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24138.458466, 28311.851227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25092.012238, 28484.648499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25916.425385, 29009.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26305.176220, 27708.756400, 1151.304033, 1151.304033, 0.000000, X, Y) && !ellipse(24922.616058, 27968.239990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24843.435120, 29620.199219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.813446, 29099.014313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27170.087738, 31712.696838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24975.112000, 30453.168000, 1472.240042, 1472.240042, 190.629000, X, Y) && !ellipse(26684.130000, 26093.172000, 1072.264031, 1072.264031, 0.000000, X, Y) && !ellipse(26985.735779, 29013.681671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24225.163200, 29897.210000, 813.864023, 813.864023, 0.000000, X, Y) && !ellipse(26076.722000, 31084.804000, 927.912027, 927.912027, 0.000000, X, Y) && !ellipse(25987.312012, 30623.062195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25972.250031, 32043.983429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26234.468689, 26488.037262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26833.686000, 31296.404000, 3033.600087, 3033.600087, 0.000000, X, Y) && !ellipse(26769.950928, 29538.549103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24959.078000, 32624.389200, 1472.240042, 655.961619, 6.636000, X, Y) && !ellipse(26562.707306, 31711.791473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26997.906433, 30404.489563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25952.361206, 26132.789032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24084.858734, 30482.393433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24789.471649, 31656.975739, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 21:09:11 2012] Writing fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src114.gif
[Fri Aug 24 21:14:14 2012] Mean detx,y = (-959.25, -4433.30) 
[Fri Aug 24 21:14:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 21:14:24 2012] grppha failed
[Fri Aug 24 21:14:24 2012] Setting source spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src114_src.pi.gz
[Fri Aug 24 21:14:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src114_bgd.pi.gz
[Fri Aug 24 21:41:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 24 21:41:09 2012] rmf not generated due to insufficient counts
[Fri Aug 24 21:41:38 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:38 2012] Error reading totcts from fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src114_src.pi.gz
[Fri Aug 24 21:41:40 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 24 21:41:45 2012] xmm0018140101/analysis//spectral/fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src114_pl.csv not found, spectral fit skipped or did not complete