[Thu Aug 23 03:49:31 2012] Detection parameters:
  Position = (283.2, 285.0) = 20 57 20.65 31 0 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 772.3 +/- 37.1
  Background counts = 61.8
  Rate = 0.1 +/- 0.006

[Thu Aug 23 03:49:35 2012] Off-axis axis estimate = 1.47'
[Thu Aug 23 17:02:17 2012] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 17:02:17 2012] Initial guess for spatial extent in simple fitting = 7.17"
[Thu Aug 23 17:02:17 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.868
[Thu Aug 23 17:02:17 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.17"
[Thu Aug 23 22:57:24 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug 23 22:57:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src1.csv
[Thu Aug 23 22:57:24 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug 23 22:57:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src1.csv
[Thu Aug 23 22:57:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:57:26 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug 23 22:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Aug 23 22:57:26 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug 23 22:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Aug 23 22:57:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:58:41 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Thu Aug 23 22:58:41 2012] Spatial fit model total counts = 2718.220000, observed total counts = 2482.000000
[Thu Aug 23 22:58:41 2012] Offset between fit and detection position for source 1 = 3.853889 pixels
[Thu Aug 23 22:58:41 2012] Warning, changing simple spatial fit ID from 1 to 8
[Thu Aug 23 22:58:41 2012] 2708.846000 total counts/ 2465.620000 bgd. counts: snr = 4.898317
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.853889 pixels
  Position = (282.0, 288.6) = 20 57 21.05 31 0 36.1
  Extent = 14.0 (14.0-28.1)", rotation angle = 0
  Source counts = 243.2 +/- 52.0
  Background counts = 2465.6
  Rate = 0.04 +/- 0.009
[Thu Aug 23 22:58:42 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:42 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 22:58:42 2012] Source does appear to be extended
[Thu Aug 23 22:58:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:58:42 2012] Source is confused with source 3
[Thu Aug 23 22:58:42 2012] Source is confused with source 141
[Thu Aug 23 22:58:42 2012] Source is confused with source 148
[Thu Aug 23 22:58:42 2012] Source is confused with source 152
[Fri Aug 24 11:03:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 11:03:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 24 11:03:10 2012] Initial guess for spatial extent in simple fitting = 14.05"
[Fri Aug 24 11:03:10 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.881
[Fri Aug 24 11:03:10 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.05"
[Fri Aug 24 19:14:26 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 24 19:14:26 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 24 19:14:26 2012] Fit fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Aug 24 19:14:29 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 24 19:14:29 2012] fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 24 19:14:29 2012] Fit fullrun_mos2_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 24 19:15:48 2012] Warning, spatial fit 1 centroid is now closest to src. 156
[Fri Aug 24 19:15:48 2012] Spatial fit model total counts = 2723.550000, observed total counts = 2482.000000
[Fri Aug 24 19:15:48 2012] Offset between fit and detection position for source 1 = 0.446342 pixels
[Fri Aug 24 19:15:48 2012] Warning, changing simple spatial fit ID from 1 to 7
[Fri Aug 24 19:15:48 2012] 2625.452000 total counts/ 2370.330000 bgd. counts: snr = 5.240147
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.446342 pixels
  Position = (282.5, 288.6) = 20 57 20.90 31 0 36.0
  Extent = 14.0 (14.0-28.1)", rotation angle = 0
  Source counts = 255.1 +/- 51.2
  Background counts = 2370.3
  Rate = 0.04 +/- 0.009
[Fri Aug 24 19:15:48 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:48 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 19:15:48 2012] Source does appear to be extended
[Fri Aug 24 19:15:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 21:09:10 2012] XMMSAS src. selection expression = ellipse(24525.994600, 25060.214000, 842.844024, 842.844024, 0.000000, X, Y)
[Fri Aug 24 21:09:10 2012] Writing source region out to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 24 21:09:10 2012] Extracting stamp from image fullrun_mos2_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (234, 240) - (331, 337)
[Fri Aug 24 21:09:10 2012] XMMSAS bgd. selection expression = annulus(24525.994600, 25060.214000, 1404.740040, 2809.480081, X, Y) && !ellipse(25298.591200, 25242.099600, 1093.440031, 1093.440031, 0.000000, X, Y) && !ellipse(24855.589844, 26399.545135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24025.595825, 27705.556702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26088.321800, 25026.409800, 1087.744031, 1087.744031, 0.000000, X, Y) && !ellipse(24522.041168, 25601.915924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24725.506139, 26853.206000, 1180.592034, 701.624625, 0.000000, X, Y) && !ellipse(26200.130000, 28048.272000, 2265.424065, 2265.424065, 0.000000, X, Y) && !ellipse(24138.458466, 28311.851227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25092.012238, 28484.648499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26305.176220, 27708.756400, 1151.304033, 1151.304033, 0.000000, X, Y) && !ellipse(24922.616058, 27968.239990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26335.704956, 25530.110657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26937.116882, 25272.121460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26684.130000, 26093.172000, 1072.264031, 1072.264031, 0.000000, X, Y) && !ellipse(26234.468689, 26488.037262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23868.715454, 25268.988525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23789.292908, 25789.897308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23870.319092, 24872.454590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25952.361206, 26132.789032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27356.661957, 27646.822144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24677.222321, 23004.776886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25574.932000, 21777.585200, 1324.072038, 1324.072038, 0.000000, X, Y) && !ellipse(25939.272000, 23379.728000, 1167.544034, 1167.544034, 0.000000, X, Y) && !ellipse(25486.894745, 23097.941864, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 21:09:10 2012] Writing fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src1.gif
[Fri Aug 24 21:09:20 2012] Mean detx,y = (60.37, -552.58) 
[Fri Aug 24 21:09:21 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 21:09:31 2012] grppha failed
[Fri Aug 24 21:09:31 2012] Setting source spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Aug 24 21:09:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug 24 21:41:38 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:38 2012] Error reading totcts from fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Aug 24 21:41:40 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:44 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Aug 24 21:41:44 2012] Source 1 has no response, skipping
[Fri Aug 24 21:41:45 2012] xmm0018140101/analysis//spectral/fullrun_mos2_xmm0018140101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete