[Thu Aug 23 03:48:18 2012] Detection parameters:
  Position = (286.3, 336.0) = 20 57 19.60 31 4 4.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 367.4 +/- 28.1
  Background counts = 73.4
  Rate = 0.07 +/- 0.006

[Thu Aug 23 03:48:19 2012] Off-axis axis estimate = 2.86'
[Thu Aug 23 09:47:41 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 09:47:41 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Thu Aug 23 09:47:41 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.940
[Thu Aug 23 09:47:41 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.86"
[Thu Aug 23 17:02:11 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src5.ximg exists
[Thu Aug 23 17:02:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src5.csv
[Thu Aug 23 17:02:11 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Aug 23 17:02:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src5.csv
[Thu Aug 23 17:02:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 17:02:14 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Aug 23 17:02:14 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Aug 23 17:02:14 2012] Fit fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Aug 23 22:58:18 2012] Warning, spatial fit 5 centroid is now closest to src. 101
[Thu Aug 23 22:58:18 2012] Spatial fit model total counts = 2841.610000, observed total counts = 2841.000000
[Thu Aug 23 22:58:18 2012] Offset between fit and detection position for source 99 = 1.317765 pixels
[Thu Aug 23 22:58:18 2012] Warning, changing simple spatial fit ID from 5 to 10
[Thu Aug 23 22:58:18 2012] 2842.450000 total counts/ 2692.100000 bgd. counts: snr = 2.897729
Spatial fit parameters:
  Offset between fit and detection position for source 99 = 1.317765 pixels
  Position = (287.6, 335.9) = 20 57 19.16 31 4 2.0
  Extent = 14.6 (13.5-15.1)", rotation angle = 0
  Source counts = 150.3 +/- 53.3
  Background counts = 2692.1
  Rate = 0.03 +/- 0.009
[Thu Aug 23 22:58:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:19 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 22:58:19 2012] Source does appear to be extended
[Thu Aug 23 22:58:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:58:19 2012] Source is confused with source 105
[Thu Aug 23 22:58:19 2012] Source is confused with source 90
[Fri Aug 24 05:06:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 05:06:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 24 05:06:29 2012] Initial guess for spatial extent in simple fitting = 14.60"
[Fri Aug 24 05:06:29 2012] source mask rpix=3.4, npix_max = 59, mask sum = 56, frac = 0.942
[Fri Aug 24 05:06:29 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 14.60"
[Fri Aug 24 11:03:04 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src5.ximg exists
[Fri Aug 24 11:03:04 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Aug 24 11:03:04 2012] Fit fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src5 appears to have run properly
[Fri Aug 24 11:03:06 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Aug 24 11:03:06 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Aug 24 11:03:06 2012] Fit fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Aug 24 19:15:21 2012] Spatial fit model total counts = 4443.130000, observed total counts = 4443.000000
[Fri Aug 24 19:15:21 2012] Offset between fit and detection position for source 99 = 1.387501 pixels
[Fri Aug 24 19:15:21 2012] 4360.960000 total counts/ 4215.340000 bgd. counts: snr = 2.242873
Spatial fit parameters:
  Offset between fit and detection position for source 99 = 1.387501 pixels
  Position = (286.2, 336.0) = 20 57 19.63 31 4 2.1
  Extent = 10.4 (5.1-18.1)", rotation angle = 0
  Source counts = 145.6 +/- 66.0
  Background counts = 4215.3
  Rate = 0.02 +/- 0.01
[Fri Aug 24 19:15:22 2012] Source 99 is offset by -0.235223 and -1.200795 pixels which is larger than
2 X fitted extent = 0.963320 x 0.963320, not incorporating fit results
[Fri Aug 24 19:15:22 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:22 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 19:15:22 2012] Source does appear to be extended
[Fri Aug 24 19:15:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 20:01:24 2012] XMMSAS src. selection expression = ellipse(24854.433600, 29181.728800, 621.612018, 621.612018, 0.000000, X, Y)
[Fri Aug 24 20:01:24 2012] Writing source region out to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src99_src.reg
[Fri Aug 24 20:01:24 2012] Extracting stamp from image fullrun_mos1_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (251, 300) - (322, 372)
[Fri Aug 24 20:01:24 2012] XMMSAS bgd. selection expression = annulus(24854.433600, 29181.728800, 1036.020030, 2072.040060, X, Y) && !ellipse(24509.708000, 27796.534000, 657.300019, 657.300019, 0.000000, X, Y) && !ellipse(24767.267800, 24958.084000, 2197.424063, 2197.424063, 0.000000, X, Y) && !ellipse(24939.088400, 26713.980200, 1118.408032, 1118.408032, 0.000000, X, Y) && !ellipse(25903.824615, 29262.120728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24564.729240, 26771.260000, 1120.576032, 1120.576032, 0.000000, X, Y) && !ellipse(25017.567871, 28492.271088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26253.428000, 27705.094000, 1107.856032, 1107.856032, 0.000000, X, Y) && !ellipse(25101.625600, 26040.858000, 2233.280064, 2233.280064, 0.000000, X, Y) && !ellipse(24148.909800, 27691.451600, 1264.000036, 1264.000036, 0.000000, X, Y) && !ellipse(25060.488000, 29822.992000, 828.256024, 828.256024, 0.000000, X, Y) && !ellipse(24102.934000, 27526.810000, 2241.152064, 2241.152064, 0.000000, X, Y) && !ellipse(25138.023895, 27882.636536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25823.344000, 30561.180000, 1358.728039, 1358.728039, 0.000000, X, Y) && !ellipse(25833.025604, 31769.384369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27088.344000, 33302.182000, 3213.488092, 3213.488092, 0.000000, X, Y) && !ellipse(24814.222400, 29522.686000, 1454.608042, 1454.608042, 0.000000, X, Y) && !ellipse(23912.788940, 29092.023621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26684.541290, 31637.217010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26801.521881, 30575.529205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26508.867400, 26768.608000, 1994.432057, 1994.432057, 0.000000, X, Y) && !ellipse(23967.162000, 32279.658000, 1429.248041, 479.356014, 90.000000, X, Y) && !ellipse(25638.990753, 30860.161621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26727.685600, 26112.630000, 1050.888030, 1050.888030, 0.000000, X, Y) && !ellipse(27597.897919, 32053.982269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23917.792000, 31147.998000, 1355.624039, 1355.624039, 0.000000, X, Y) && !ellipse(27121.447601, 29755.265869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25003.382000, 30853.141200, 1358.728039, 1358.728039, 0.000000, X, Y) && !ellipse(25423.278000, 31559.808000, 1418.872041, 1418.872041, 0.000000, X, Y)
[Fri Aug 24 20:01:24 2012] Writing fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src99.gif
[Fri Aug 24 20:11:36 2012] Mean detx,y = (-4480.92, 103.32) 
[Fri Aug 24 20:11:37 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 20:11:46 2012] grppha failed
[Fri Aug 24 20:11:46 2012] Setting source spectrum file to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src99_src.pi.gz
[Fri Aug 24 20:11:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src99_bgd.pi.gz
[Fri Aug 24 21:41:36 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:36 2012] Error reading totcts from fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src99_src.pi.gz
[Fri Aug 24 21:41:38 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:42 2012] Flag b found in src. 99 procflags, skipping spectral fitting
[Fri Aug 24 21:41:42 2012] Flag c found in src. 99 procflags, skipping spectral fitting
[Fri Aug 24 21:41:42 2012] Source 99 has no response, skipping
[Fri Aug 24 21:41:43 2012] xmm0018140101/analysis//spectral/fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src99_pl.csv not found, spectral fit skipped or did not complete