[Thu Aug 23 03:48:17 2012] Detection parameters:
  Position = (281.7, 352.3) = 20 57 21.17 31 5 8.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.1 +/- 15.9
  Background counts = 58.5
  Rate = 0.02 +/- 0.004

[Thu Aug 23 03:48:19 2012] Off-axis axis estimate = 4.09'
[Thu Aug 23 09:47:42 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 09:47:42 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Thu Aug 23 09:47:42 2012] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.876
[Thu Aug 23 09:47:42 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 8.47"
[Thu Aug 23 17:02:14 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src85.ximg exists
[Thu Aug 23 17:02:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src85.csv
[Thu Aug 23 17:02:14 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src85_1.ximg exists
[Thu Aug 23 17:02:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src85.csv
[Thu Aug 23 17:02:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 17:02:17 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Thu Aug 23 17:02:17 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Thu Aug 23 17:02:17 2012] Fit fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Thu Aug 23 22:58:19 2012] Warning, spatial fit 85 centroid is now closest to src. 82
[Thu Aug 23 22:58:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:19 2012] Assessing source extent using major
[Thu Aug 23 22:58:19 2012] Source does appear to be extended
[Thu Aug 23 22:58:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:58:19 2012] Source is confused with source 79
[Fri Aug 24 05:06:29 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 05:06:29 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Fri Aug 24 05:06:29 2012] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.876
[Fri Aug 24 05:06:29 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 8.47"
[Fri Aug 24 11:03:06 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src71.ximg exists
[Fri Aug 24 11:03:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src71.csv
[Fri Aug 24 11:03:06 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src71_1.ximg exists
[Fri Aug 24 11:03:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src71.csv
[Fri Aug 24 11:03:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 11:03:09 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Fri Aug 24 11:03:09 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Fri Aug 24 11:03:09 2012] Fit fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Fri Aug 24 19:15:22 2012] Spatial fit model total counts = 1361.710000, observed total counts = 1269.000000
[Fri Aug 24 19:15:22 2012] Offset between fit and detection position for source 80 = 8.843832 pixels
[Fri Aug 24 19:15:22 2012] 1254.508000 total counts/ 1082.980000 bgd. counts: snr = 5.212245
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 8.843832 pixels
  Position = (275.5, 358.6) = 20 57 23.28 31 5 40.4
  Extent = 16.9 (16.9-33.9)", rotation angle = 0
  Source counts = 171.5 +/- 35.4
  Background counts = 1083.0
  Rate = 0.03 +/- 0.006
[Fri Aug 24 19:15:22 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:22 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 19:15:22 2012] Source does appear to be extended
[Fri Aug 24 19:15:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 20:01:28 2012] XMMSAS src. selection expression = ellipse(23917.792000, 31147.998000, 1016.718029, 1016.718029, 0.000000, X, Y)
[Fri Aug 24 20:01:28 2012] Writing source region out to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src80_src.reg
[Fri Aug 24 20:01:28 2012] Extracting stamp from image fullrun_mos1_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (217, 300) - (334, 417)
[Fri Aug 24 20:01:28 2012] XMMSAS bgd. selection expression = annulus(23917.792000, 31147.998000, 1694.530049, 3389.060098, X, Y) && !ellipse(20745.687200, 34240.057600, 1104.904032, 1104.904032, 0.000000, X, Y) && !ellipse(24509.708000, 27796.534000, 657.300019, 657.300019, 0.000000, X, Y) && !ellipse(24854.433600, 29181.728800, 828.816024, 828.816024, 0.000000, X, Y) && !ellipse(25105.175873, 35007.216492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24939.088400, 26713.980200, 1118.408032, 1118.408032, 0.000000, X, Y) && !ellipse(25903.824615, 29262.120728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24564.729240, 26771.260000, 1120.576032, 1120.576032, 0.000000, X, Y) && !ellipse(25017.567871, 28492.271088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26253.428000, 27705.094000, 1107.856032, 1107.856032, 0.000000, X, Y) && !ellipse(25101.625600, 26040.858000, 2233.280064, 2233.280064, 0.000000, X, Y) && !ellipse(24148.909800, 27691.451600, 1264.000036, 1264.000036, 0.000000, X, Y) && !ellipse(25060.488000, 29822.992000, 828.256024, 828.256024, 0.000000, X, Y) && !ellipse(24102.934000, 27526.810000, 2241.152064, 2241.152064, 0.000000, X, Y) && !ellipse(24326.188000, 34340.200000, 383.897611, 383.897611, 0.000000, X, Y) && !ellipse(25138.023895, 27882.636536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25823.344000, 30561.180000, 1358.728039, 1358.728039, 0.000000, X, Y) && !ellipse(25833.025604, 31769.384369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27088.344000, 33302.182000, 3213.488092, 3213.488092, 0.000000, X, Y) && !ellipse(24594.319031, 32933.314697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24814.222400, 29522.686000, 1454.608042, 1454.608042, 0.000000, X, Y) && !ellipse(25871.937714, 35372.737030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23685.616669, 33444.014893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23912.788940, 29092.023621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26684.541290, 31637.217010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25736.863098, 34586.195221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27224.024000, 33591.754000, 1518.576044, 1518.576044, 0.000000, X, Y) && !ellipse(26801.521881, 30575.529205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26508.867400, 26768.608000, 1994.432057, 1994.432057, 0.000000, X, Y) && !ellipse(23967.162000, 32279.658000, 1429.248041, 479.356014, 90.000000, X, Y) && !ellipse(20309.542480, 35197.871490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25638.990753, 30860.161621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27105.153687, 32135.265991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27597.897919, 32053.982269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22222.233551, 34397.112000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25421.012848, 32923.427368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23832.126495, 35160.953308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20924.430000, 36010.540000, 1762.808051, 915.824026, 115.697000, X, Y) && !ellipse(27834.113220, 31554.581879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24419.652000, 35730.566000, 1658.040048, 516.716815, 94.818930, X, Y) && !ellipse(23185.565796, 34505.092041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24253.437164, 33353.738586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19547.826000, 35511.524000, 1763.624051, 1763.624051, 0.000000, X, Y) && !ellipse(22469.297600, 35539.076000, 1655.624048, 1655.624048, 0.000000, X, Y) && !ellipse(26180.392000, 34135.128000, 1606.744046, 1606.744046, 22.869500, X, Y) && !ellipse(27445.023987, 33104.606567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27121.447601, 29755.265869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25003.382000, 30853.141200, 1358.728039, 1358.728039, 0.000000, X, Y) && !ellipse(25423.278000, 31559.808000, 1418.872041, 1418.872041, 0.000000, X, Y)
[Fri Aug 24 20:01:28 2012] Writing fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src80.gif
[Fri Aug 24 20:50:22 2012] Mean detx,y = (-6349.82, 1173.73) 
[Fri Aug 24 20:50:23 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 20:50:56 2012] grppha failed
[Fri Aug 24 20:50:56 2012] Setting source spectrum file to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src80_src.pi.gz
[Fri Aug 24 20:50:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Fri Aug 24 21:41:37 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:37 2012] Error reading totcts from fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src80_src.pi.gz
[Fri Aug 24 21:41:38 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:42 2012] Flag c found in src. 80 procflags, skipping spectral fitting
[Fri Aug 24 21:41:42 2012] Source 80 has no response, skipping
[Fri Aug 24 21:41:43 2012] xmm0018140101/analysis//spectral/fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src80_pl.csv not found, spectral fit skipped or did not complete