[Thu Aug 23 03:48:17 2012] Detection parameters:
  Position = (308.6, 352.0) = 20 57 12.05 31 5 13.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.5 +/- 21.3
  Background counts = 130.3
  Rate = 0.03 +/- 0.005

[Thu Aug 23 03:48:19 2012] Off-axis axis estimate = 3.95'
[Thu Aug 23 09:47:42 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 09:47:42 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Thu Aug 23 09:47:42 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.845
[Thu Aug 23 09:47:42 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 8.41"
[Thu Aug 23 17:02:13 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src48.ximg exists
[Thu Aug 23 17:02:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src48.csv
[Thu Aug 23 17:02:13 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src48_1.ximg exists
[Thu Aug 23 17:02:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src48.csv
[Thu Aug 23 17:02:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 17:02:16 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Thu Aug 23 17:02:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src48.csv
[Thu Aug 23 17:02:16 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Thu Aug 23 17:02:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src48.csv
[Thu Aug 23 17:02:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:58:18 2012] Warning, spatial fit 48 centroid is now closest to src. 82
[Thu Aug 23 22:58:18 2012] Source 78 is offset by -3.185542 and -3.843388 pixels which is larger than
2 X fitted extent = 1.024193 x 1.024193, not incorporating fit results
[Thu Aug 23 22:58:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:19 2012] Assessing source extent using major
[Thu Aug 23 22:58:19 2012] Source does appear to be extended
[Thu Aug 23 22:58:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 05:06:29 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 05:06:29 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Fri Aug 24 05:06:29 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.845
[Fri Aug 24 05:06:29 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 8.41"
[Fri Aug 24 11:03:05 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src40.ximg exists
[Fri Aug 24 11:03:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src40.csv
[Fri Aug 24 11:03:05 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src40_1.ximg exists
[Fri Aug 24 11:03:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src40.csv
[Fri Aug 24 11:03:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 11:03:07 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Fri Aug 24 11:03:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src40.csv
[Fri Aug 24 11:03:07 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Fri Aug 24 11:03:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src40.csv
[Fri Aug 24 11:03:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:15:22 2012] Source 78 is offset by 2.686350 and 3.575968 pixels which is larger than
2 X fitted extent = 0.966097 x 0.966097, not incorporating fit results
[Fri Aug 24 19:15:22 2012] Source 78 is offset by 2.686849 and 3.557761 pixels which is larger than
2 X fitted extent = 1.090929 x 1.090929, not incorporating fit results
[Fri Aug 24 19:15:22 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:22 2012] Assessing source extent using major
[Fri Aug 24 19:15:22 2012] Source does appear to be extended
[Fri Aug 24 19:15:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 19:15:22 2012] Source is confused with source 82
[Fri Aug 24 20:01:27 2012] XMMSAS src. selection expression = ellipse(26801.521881, 30575.529205, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 24 20:01:27 2012] Writing source region out to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src78_src.reg
[Fri Aug 24 20:01:27 2012] Extracting stamp from image fullrun_mos1_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (271, 315) - (346, 390)
[Fri Aug 24 20:01:27 2012] XMMSAS bgd. selection expression = annulus(26801.521881, 30575.529205, 1087.500000, 2175.000000, X, Y) && !ellipse(24509.708000, 27796.534000, 657.300019, 657.300019, 0.000000, X, Y) && !ellipse(24854.433600, 29181.728800, 828.816024, 828.816024, 0.000000, X, Y) && !ellipse(25903.824615, 29262.120728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25017.567871, 28492.271088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26253.428000, 27705.094000, 1107.856032, 1107.856032, 0.000000, X, Y) && !ellipse(24148.909800, 27691.451600, 1264.000036, 1264.000036, 0.000000, X, Y) && !ellipse(25060.488000, 29822.992000, 828.256024, 828.256024, 0.000000, X, Y) && !ellipse(24102.934000, 27526.810000, 2241.152064, 2241.152064, 0.000000, X, Y) && !ellipse(25138.023895, 27882.636536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25823.344000, 30561.180000, 1358.728039, 1358.728039, 0.000000, X, Y) && !ellipse(25833.025604, 31769.384369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27088.344000, 33302.182000, 3213.488092, 3213.488092, 0.000000, X, Y) && !ellipse(24594.319031, 32933.314697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24814.222400, 29522.686000, 1454.608042, 1454.608042, 0.000000, X, Y) && !ellipse(23912.788940, 29092.023621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26684.541290, 31637.217010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27224.024000, 33591.754000, 1518.576044, 1518.576044, 0.000000, X, Y) && !ellipse(26508.867400, 26768.608000, 1994.432057, 1994.432057, 0.000000, X, Y) && !ellipse(23967.162000, 32279.658000, 1429.248041, 479.356014, 90.000000, X, Y) && !ellipse(25638.990753, 30860.161621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27105.153687, 32135.265991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27597.897919, 32053.982269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25421.012848, 32923.427368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27834.113220, 31554.581879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28918.355520, 32200.938400, 1489.984043, 335.684010, 84.686000, X, Y) && !ellipse(23917.792000, 31147.998000, 1355.624039, 1355.624039, 0.000000, X, Y) && !ellipse(24253.437164, 33353.738586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26180.392000, 34135.128000, 1606.744046, 1606.744046, 22.869500, X, Y) && !ellipse(27445.023987, 33104.606567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27121.447601, 29755.265869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25003.382000, 30853.141200, 1358.728039, 1358.728039, 0.000000, X, Y) && !ellipse(25423.278000, 31559.808000, 1418.872041, 1418.872041, 0.000000, X, Y)
[Fri Aug 24 20:01:27 2012] Writing fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src78.gif
[Fri Aug 24 20:40:39 2012] Mean detx,y = (-6103.16, -1616.32) 
[Fri Aug 24 20:40:40 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 20:40:57 2012] grppha failed
[Fri Aug 24 20:40:57 2012] Setting source spectrum file to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src78_src.pi.gz
[Fri Aug 24 20:40:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Fri Aug 24 21:09:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 24 21:09:01 2012] rmf not generated due to insufficient counts
[Fri Aug 24 21:41:37 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:37 2012] Error reading totcts from fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src78_src.pi.gz
[Fri Aug 24 21:41:38 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 24 21:41:43 2012] xmm0018140101/analysis//spectral/fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src78_pl.csv not found, spectral fit skipped or did not complete