[Thu Aug 23 03:48:17 2012] Detection parameters:
  Position = (307.3, 364.2) = 20 57 12.50 31 6 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.7 +/- 21.5
  Background counts = 121.1
  Rate = 0.03 +/- 0.005

[Thu Aug 23 03:48:19 2012] Off-axis axis estimate = 4.81'
[Thu Aug 23 09:47:42 2012] Using EEF radius (= 8.83 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 09:47:42 2012] Initial guess for spatial extent in simple fitting = 8.83"
[Thu Aug 23 09:47:42 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.976
[Thu Aug 23 09:47:42 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 8.83"
[Thu Aug 23 17:02:13 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src44.ximg exists
[Thu Aug 23 17:02:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src44.csv
[Thu Aug 23 17:02:13 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src44_1.ximg exists
[Thu Aug 23 17:02:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src44.csv
[Thu Aug 23 17:02:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 17:02:16 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Thu Aug 23 17:02:16 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Thu Aug 23 17:02:16 2012] Fit fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Thu Aug 23 22:58:18 2012] Warning, spatial fit 44 centroid is now closest to src. 66
[Thu Aug 23 22:58:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:19 2012] Assessing source extent using major
[Thu Aug 23 22:58:19 2012] Source does appear to be extended
[Thu Aug 23 22:58:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:58:19 2012] Source is confused with source 60
[Fri Aug 24 05:06:29 2012] Using EEF radius (= 8.83 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 05:06:29 2012] Initial guess for spatial extent in simple fitting = 8.83"
[Fri Aug 24 05:06:29 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.976
[Fri Aug 24 05:06:29 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 8.83"
[Fri Aug 24 11:03:05 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src37.ximg exists
[Fri Aug 24 11:03:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src37.csv
[Fri Aug 24 11:03:05 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src37_1.ximg exists
[Fri Aug 24 11:03:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src37.csv
[Fri Aug 24 11:03:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 11:03:07 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Fri Aug 24 11:03:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Fri Aug 24 11:03:07 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Fri Aug 24 11:03:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Fri Aug 24 11:03:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:15:22 2012] Source 61 is offset by 3.952199 and 5.980058 pixels which is larger than
2 X fitted extent = 4.432722 x 4.432722, not incorporating fit results
[Fri Aug 24 19:15:22 2012] Warning, spatial fit 37 centroid is now closest to src. 66
[Fri Aug 24 19:15:22 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:22 2012] Assessing source extent using major
[Fri Aug 24 19:15:22 2012] Source does appear to be extended
[Fri Aug 24 19:15:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 20:01:26 2012] XMMSAS src. selection expression = ellipse(26684.541290, 31637.217010, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 24 20:01:26 2012] Writing source region out to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src61_src.reg
[Fri Aug 24 20:01:26 2012] Extracting stamp from image fullrun_mos1_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (270, 327) - (345, 402)
[Fri Aug 24 20:01:26 2012] XMMSAS bgd. selection expression = annulus(26684.541290, 31637.217010, 1087.500000, 2175.000000, X, Y) && !ellipse(24854.433600, 29181.728800, 828.816024, 828.816024, 0.000000, X, Y) && !ellipse(25903.824615, 29262.120728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25060.488000, 29822.992000, 828.256024, 828.256024, 0.000000, X, Y) && !ellipse(24102.934000, 27526.810000, 2241.152064, 2241.152064, 0.000000, X, Y) && !ellipse(25823.344000, 30561.180000, 1358.728039, 1358.728039, 0.000000, X, Y) && !ellipse(25833.025604, 31769.384369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27088.344000, 33302.182000, 3213.488092, 3213.488092, 0.000000, X, Y) && !ellipse(24594.319031, 32933.314697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24814.222400, 29522.686000, 1454.608042, 1454.608042, 0.000000, X, Y) && !ellipse(23685.616669, 33444.014893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23912.788940, 29092.023621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25736.863098, 34586.195221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27224.024000, 33591.754000, 1518.576044, 1518.576044, 0.000000, X, Y) && !ellipse(26801.521881, 30575.529205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23967.162000, 32279.658000, 1429.248041, 479.356014, 90.000000, X, Y) && !ellipse(25638.990753, 30860.161621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27105.153687, 32135.265991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27597.897919, 32053.982269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25421.012848, 32923.427368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27834.113220, 31554.581879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28918.355520, 32200.938400, 1489.984043, 335.684010, 84.686000, X, Y) && !ellipse(23917.792000, 31147.998000, 1355.624039, 1355.624039, 0.000000, X, Y) && !ellipse(24253.437164, 33353.738586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26180.392000, 34135.128000, 1606.744046, 1606.744046, 22.869500, X, Y) && !ellipse(27445.023987, 33104.606567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27121.447601, 29755.265869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25003.382000, 30853.141200, 1358.728039, 1358.728039, 0.000000, X, Y) && !ellipse(25423.278000, 31559.808000, 1418.872041, 1418.872041, 0.000000, X, Y)
[Fri Aug 24 20:01:26 2012] Writing fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src61.gif
[Fri Aug 24 20:39:42 2012] Mean detx,y = (-7191.94, -1368.09) 
[Fri Aug 24 20:39:43 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 20:39:54 2012] grppha failed
[Fri Aug 24 20:39:54 2012] Setting source spectrum file to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src61_src.pi.gz
[Fri Aug 24 20:39:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Fri Aug 24 21:09:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 24 21:09:00 2012] rmf not generated due to insufficient counts
[Fri Aug 24 21:41:37 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:37 2012] Error reading totcts from fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src61_src.pi.gz
[Fri Aug 24 21:41:38 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 24 21:41:43 2012] xmm0018140101/analysis//spectral/fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete