[Thu Aug 23 03:48:16 2012] Detection parameters:
  Position = (283.9, 406.0) = 20 57 20.43 31 9 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.6 +/- 24.2
  Background counts = 110.4
  Rate = 0.02 +/- 0.004

[Thu Aug 23 03:48:19 2012] Off-axis axis estimate = 7.87'
[Thu Aug 23 09:47:42 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 09:47:42 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Thu Aug 23 09:47:42 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.083
[Thu Aug 23 09:47:42 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 10.36"
[Thu Aug 23 17:02:14 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src79.ximg exists
[Thu Aug 23 17:02:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src79.csv
[Thu Aug 23 17:02:14 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src79_1.ximg exists
[Thu Aug 23 17:02:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src79.csv
[Thu Aug 23 17:02:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 17:02:17 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Thu Aug 23 17:02:17 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Thu Aug 23 17:02:17 2012] Fit fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Thu Aug 23 22:58:18 2012] Source 33 is offset by 2.543554 and -3.856972 pixels which is larger than
2 X fitted extent = 2.996455 x 2.996455, not incorporating fit results
[Thu Aug 23 22:58:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:19 2012] Assessing source extent using major
[Thu Aug 23 22:58:19 2012] Source does appear to be extended
[Thu Aug 23 22:58:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:58:19 2012] Source is confused with source 38
[Fri Aug 24 05:06:29 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 05:06:29 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Fri Aug 24 05:06:29 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.083
[Fri Aug 24 05:06:29 2012] Giving source the simple spatial ID 66 for pass 1, mean size = 10.36"
[Fri Aug 24 11:03:05 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src66.ximg exists
[Fri Aug 24 11:03:05 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src66_1.ximg exists
[Fri Aug 24 11:03:05 2012] Fit fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src66 appears to have run properly
[Fri Aug 24 11:03:09 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Fri Aug 24 11:03:09 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Fri Aug 24 11:03:09 2012] Fit fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src66 appears to have run properly
[Fri Aug 24 19:15:22 2012] Spatial fit model total counts = 2197.710000, observed total counts = 2195.000000
[Fri Aug 24 19:15:22 2012] Offset between fit and detection position for source 33 = 5.890155 pixels
[Fri Aug 24 19:15:22 2012] 1927.165000 total counts/ 1746.870000 bgd. counts: snr = 4.313734
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 5.890155 pixels
  Position = (281.2, 411.3) = 20 57 21.33 31 9 29.5
  Extent = 20.7 (20.7-41.5)" x 6.5 (4.3-8.6)", rotation angle = 95 (72-107) degrees
  Source counts = 180.3 +/- 43.9
  Background counts = 1746.9
  Rate = 0.03 +/- 0.007
[Fri Aug 24 19:15:22 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:22 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 19:15:22 2012] Source does appear to be extended
[Fri Aug 24 19:15:22 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.39
[Fri Aug 24 19:15:22 2012] Source is asymmetric
[Fri Aug 24 20:01:28 2012] XMMSAS src. selection expression = ellipse(24419.652000, 35730.566000, 1243.530036, 387.537611, 94.818930, X, Y)
[Fri Aug 24 20:01:28 2012] Writing source region out to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src33_src.reg
[Fri Aug 24 20:01:28 2012] Extracting stamp from image fullrun_mos1_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (210, 340) - (353, 483)
[Fri Aug 24 20:01:28 2012] XMMSAS bgd. selection expression = annulus(24419.652000, 35730.566000, 2072.550060, 4145.100119, X, Y) && !ellipse(20745.687200, 34240.057600, 1104.904032, 1104.904032, 0.000000, X, Y) && !ellipse(25105.175873, 35007.216492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24326.188000, 34340.200000, 383.897611, 383.897611, 0.000000, X, Y) && !ellipse(20039.192795, 35787.447296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20702.205383, 35617.058136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23846.338867, 35987.116119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25823.344000, 30561.180000, 1358.728039, 1358.728039, 0.000000, X, Y) && !ellipse(25099.950775, 35705.733459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.025604, 31769.384369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27088.344000, 33302.182000, 3213.488092, 3213.488092, 0.000000, X, Y) && !ellipse(24594.319031, 32933.314697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25871.937714, 35372.737030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23685.616669, 33444.014893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26684.541290, 31637.217010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25736.863098, 34586.195221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27224.024000, 33591.754000, 1518.576044, 1518.576044, 0.000000, X, Y) && !ellipse(23967.162000, 32279.658000, 1429.248041, 479.356014, 90.000000, X, Y) && !ellipse(20309.542480, 35197.871490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25638.990753, 30860.161621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27105.153687, 32135.265991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27597.897919, 32053.982269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22222.233551, 34397.112000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25421.012848, 32923.427368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23832.126495, 35160.953308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20924.430000, 36010.540000, 1762.808051, 915.824026, 115.697000, X, Y) && !ellipse(27834.113220, 31554.581879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23185.565796, 34505.092041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28918.355520, 32200.938400, 1489.984043, 335.684010, 84.686000, X, Y) && !ellipse(23917.792000, 31147.998000, 1355.624039, 1355.624039, 0.000000, X, Y) && !ellipse(20491.357559, 36145.562958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24253.437164, 33353.738586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19547.826000, 35511.524000, 1763.624051, 1763.624051, 0.000000, X, Y) && !ellipse(22469.297600, 35539.076000, 1655.624048, 1655.624048, 0.000000, X, Y) && !ellipse(26180.392000, 34135.128000, 1606.744046, 1606.744046, 22.869500, X, Y) && !ellipse(27445.023987, 33104.606567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25599.438782, 36286.611389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20698.625076, 36568.604706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25003.382000, 30853.141200, 1358.728039, 1358.728039, 0.000000, X, Y) && !ellipse(25423.278000, 31559.808000, 1418.872041, 1418.872041, 0.000000, X, Y) && !ellipse(19944.944565, 36661.485596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20738.562027, 37249.457764, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 20:01:28 2012] Writing fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src33.gif
[Fri Aug 24 20:48:38 2012] Mean detx,y = (-10941.57, 1434.85) 
[Fri Aug 24 20:48:39 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 20:48:51 2012] grppha failed
[Fri Aug 24 20:48:52 2012] Setting source spectrum file to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src33_src.pi.gz
[Fri Aug 24 20:48:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Fri Aug 24 21:41:37 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:37 2012] Error reading totcts from fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src33_src.pi.gz
[Fri Aug 24 21:41:38 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:42 2012] Flag b found in src. 33 procflags, skipping spectral fitting
[Fri Aug 24 21:41:42 2012] Flag c found in src. 33 procflags, skipping spectral fitting
[Fri Aug 24 21:41:42 2012] Source 33 has no response, skipping
[Fri Aug 24 21:41:43 2012] xmm0018140101/analysis//spectral/fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete