[Thu Aug 23 03:48:16 2012] Detection parameters:
  Position = (225.7, 407.9) = 20 57 40.16 31 9 13.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.9 +/- 16.2
  Background counts = 43.8
  Rate = 0.02 +/- 0.003

[Thu Aug 23 03:48:19 2012] Off-axis axis estimate = 9.53'
[Thu Aug 23 09:47:42 2012] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 09:47:42 2012] Initial guess for spatial extent in simple fitting = 11.19"
[Thu Aug 23 09:47:42 2012] source mask rpix=2.6, npix_max = 37, mask sum = 26, frac = 0.688
[Thu Aug 23 09:47:42 2012] Giving source the simple spatial ID 88 for pass 0, mean size = 11.19"
[Thu Aug 23 17:02:14 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src88.ximg exists
[Thu Aug 23 17:02:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src88.csv
[Thu Aug 23 17:02:14 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src88_1.ximg exists
[Thu Aug 23 17:02:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src88.csv
[Thu Aug 23 17:02:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 17:02:17 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Thu Aug 23 17:02:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src88.csv
[Thu Aug 23 17:02:17 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Thu Aug 23 17:02:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src88.csv
[Thu Aug 23 17:02:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:58:19 2012] Warning, spatial fit 88 centroid is now closest to src. 20
[Thu Aug 23 22:58:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:19 2012] Assessing source extent using major
[Thu Aug 23 22:58:19 2012] Source does appear to be extended
[Thu Aug 23 22:58:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:58:19 2012] Source is confused with source 27
[Fri Aug 24 05:06:29 2012] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 05:06:29 2012] Initial guess for spatial extent in simple fitting = 11.19"
[Fri Aug 24 05:06:29 2012] source mask rpix=2.6, npix_max = 37, mask sum = 26, frac = 0.688
[Fri Aug 24 05:06:29 2012] Giving source the simple spatial ID 74 for pass 1, mean size = 11.19"
[Fri Aug 24 11:03:06 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src74.ximg exists
[Fri Aug 24 11:03:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src74.csv
[Fri Aug 24 11:03:06 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src74_1.ximg exists
[Fri Aug 24 11:03:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src74.csv
[Fri Aug 24 11:03:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 11:03:09 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Fri Aug 24 11:03:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src74.csv
[Fri Aug 24 11:03:09 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Fri Aug 24 11:03:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src74.csv
[Fri Aug 24 11:03:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 19:15:22 2012] Spatial fit model total counts = 1291.220000, observed total counts = 1233.000000
[Fri Aug 24 19:15:22 2012] Offset between fit and detection position for source 31 = 0.903957 pixels
[Fri Aug 24 19:15:22 2012] Warning, changing simple spatial fit ID from 74 to 22
[Fri Aug 24 19:15:22 2012] 1339.402000 total counts/ 873.809000 bgd. counts: snr = 15.750639
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.903957 pixels
  Position = (225.2, 408.7) = 20 57 40.30 31 9 18.5
  Extent = 22.0 (21.3-22.4)", rotation angle = 0
  Source counts = 465.6 +/- 36.6
  Background counts = 873.8
  Rate = 0.08 +/- 0.006
[Fri Aug 24 19:15:22 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:22 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 19:15:22 2012] Source does appear to be extended
[Fri Aug 24 19:15:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 20:01:28 2012] XMMSAS src. selection expression = ellipse(19547.826000, 35511.524000, 1322.718038, 1322.718038, 0.000000, X, Y)
[Fri Aug 24 20:01:28 2012] Writing source region out to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src31_src.reg
[Fri Aug 24 20:01:28 2012] Extracting stamp from image fullrun_mos1_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (149, 333) - (301, 485)
[Fri Aug 24 20:01:28 2012] XMMSAS bgd. selection expression = annulus(19547.826000, 35511.524000, 2204.530063, 4409.060127, X, Y) && !ellipse(20745.687200, 34240.057600, 1104.904032, 1104.904032, 0.000000, X, Y) && !ellipse(24326.188000, 34340.200000, 383.897611, 383.897611, 0.000000, X, Y) && !ellipse(20039.192795, 35787.447296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20702.205383, 35617.058136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23846.338867, 35987.116119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27088.344000, 33302.182000, 3213.488092, 3213.488092, 0.000000, X, Y) && !ellipse(24594.319031, 32933.314697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23685.616669, 33444.014893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23967.162000, 32279.658000, 1429.248041, 479.356014, 90.000000, X, Y) && !ellipse(20309.542480, 35197.871490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22222.233551, 34397.112000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23832.126495, 35160.953308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20924.430000, 36010.540000, 1762.808051, 915.824026, 115.697000, X, Y) && !ellipse(24419.652000, 35730.566000, 1658.040048, 516.716815, 94.818930, X, Y) && !ellipse(23185.565796, 34505.092041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23917.792000, 31147.998000, 1355.624039, 1355.624039, 0.000000, X, Y) && !ellipse(20491.357559, 36145.562958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24253.437164, 33353.738586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22469.297600, 35539.076000, 1655.624048, 1655.624048, 0.000000, X, Y) && !ellipse(20698.625076, 36568.604706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25003.382000, 30853.141200, 1358.728039, 1358.728039, 0.000000, X, Y) && !ellipse(19944.944565, 36661.485596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18218.806473, 38460.092712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18947.641220, 37347.245148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20738.562027, 37249.457764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18684.454803, 36573.694397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18584.414627, 38233.969177, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 20:01:28 2012] Writing fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src31.gif
[Fri Aug 24 20:51:35 2012] Mean detx,y = (-10239.79, 5949.95) 
[Fri Aug 24 20:51:37 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 20:52:27 2012] grppha failed
[Fri Aug 24 20:52:27 2012] Setting source spectrum file to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src31_src.pi.gz
[Fri Aug 24 20:52:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Fri Aug 24 21:41:37 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:37 2012] Error reading totcts from fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src31_src.pi.gz
[Fri Aug 24 21:41:38 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:42 2012] Flag c found in src. 31 procflags, skipping spectral fitting
[Fri Aug 24 21:41:42 2012] Source 31 has no response, skipping
[Fri Aug 24 21:41:43 2012] xmm0018140101/analysis//spectral/fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete