[Thu Aug 23 03:48:18 2012] Detection parameters:
  Position = (290.3, 274.1) = 20 57 18.26 30 59 32.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.5 +/- 22.5
  Background counts = 83.5
  Rate = 0.03 +/- 0.004

[Thu Aug 23 03:48:19 2012] Off-axis axis estimate = 1.86'
[Thu Aug 23 09:47:42 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 09:47:42 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Thu Aug 23 09:47:42 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Thu Aug 23 09:47:42 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 7.36"
[Thu Aug 23 17:02:13 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src51.ximg exists
[Thu Aug 23 17:02:13 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src51.csv
[Thu Aug 23 17:02:13 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src51_1.ximg exists
[Thu Aug 23 17:02:13 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src51.csv
[Thu Aug 23 17:02:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 17:02:16 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Thu Aug 23 17:02:16 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Thu Aug 23 17:02:16 2012] Fit fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Thu Aug 23 22:58:18 2012] Source 133 is offset by 6.077220 and -7.697733 pixels which is larger than
2 X fitted extent = 3.325687 x 3.325687, not incorporating fit results
[Thu Aug 23 22:58:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:19 2012] Assessing source extent using major
[Thu Aug 23 22:58:19 2012] Source does appear to be extended
[Thu Aug 23 22:58:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:58:19 2012] Source is confused with source 135
[Fri Aug 24 05:06:29 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 05:06:29 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Fri Aug 24 05:06:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Fri Aug 24 05:06:29 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 7.36"
[Fri Aug 24 11:03:05 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src43.ximg exists
[Fri Aug 24 11:03:05 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src43_1.ximg exists
[Fri Aug 24 11:03:05 2012] Fit fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src43 appears to have run properly
[Fri Aug 24 11:03:08 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Fri Aug 24 11:03:08 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Fri Aug 24 11:03:08 2012] Fit fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Fri Aug 24 19:15:22 2012] Source 133 is offset by 6.109013 and -7.697733 pixels which is larger than
2 X fitted extent = 3.404487 x 3.404487, not incorporating fit results
[Fri Aug 24 19:15:22 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:22 2012] Assessing source extent using major
[Fri Aug 24 19:15:22 2012] Source does appear to be extended
[Fri Aug 24 19:15:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 20:01:27 2012] XMMSAS src. selection expression = ellipse(25204.126160, 23795.617188, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 24 20:01:27 2012] Writing source region out to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src133_src.reg
[Fri Aug 24 20:01:27 2012] Extracting stamp from image fullrun_mos1_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (253, 237) - (328, 312)
[Fri Aug 24 20:01:27 2012] XMMSAS bgd. selection expression = annulus(25204.126160, 23795.617188, 1087.500000, 2175.000000, X, Y) && !ellipse(24599.513200, 24699.100200, 1150.432033, 1150.432033, 0.000000, X, Y) && !ellipse(24767.267800, 24958.084000, 2197.424063, 2197.424063, 0.000000, X, Y) && !ellipse(24939.088400, 26713.980200, 1118.408032, 1118.408032, 0.000000, X, Y) && !ellipse(24564.729240, 26771.260000, 1120.576032, 1120.576032, 0.000000, X, Y) && !ellipse(25101.625600, 26040.858000, 2233.280064, 2233.280064, 0.000000, X, Y) && !ellipse(24571.841553, 26230.170197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24102.934000, 27526.810000, 2241.152064, 2241.152064, 0.000000, X, Y) && !ellipse(26811.113800, 24871.284200, 1115.584032, 1115.584032, 0.000000, X, Y) && !ellipse(26875.830800, 25670.508200, 1089.640031, 1089.640031, 0.000000, X, Y) && !ellipse(26508.867400, 26768.608000, 1994.432057, 1994.432057, 0.000000, X, Y) && !ellipse(26299.742584, 25869.317200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26727.685600, 26112.630000, 1050.888030, 1050.888030, 0.000000, X, Y) && !ellipse(26423.087200, 22978.909800, 1230.728035, 1230.728035, 0.000000, X, Y) && !ellipse(24227.802856, 23711.436829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25217.510000, 21165.242000, 1332.528038, 1332.528038, 0.000000, X, Y) && !ellipse(23829.171448, 21191.032120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24748.809875, 23541.236176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25826.467682, 21356.991364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25781.767609, 22890.427429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24643.038000, 21391.982800, 1336.056038, 1336.056038, 0.000000, X, Y) && !ellipse(24003.274000, 21482.488000, 1372.880040, 1372.880040, 0.000000, X, Y)
[Fri Aug 24 20:01:27 2012] Writing fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src133.gif
[Fri Aug 24 20:41:54 2012] Mean detx,y = (740.36, -940.28) 
[Fri Aug 24 20:41:55 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 20:42:05 2012] grppha failed
[Fri Aug 24 20:42:05 2012] Setting source spectrum file to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src133_src.pi.gz
[Fri Aug 24 20:42:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src133_bgd.pi.gz
[Fri Aug 24 21:09:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 24 21:09:01 2012] rmf not generated due to insufficient counts
[Fri Aug 24 21:41:37 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:37 2012] Error reading totcts from fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src133_src.pi.gz
[Fri Aug 24 21:41:38 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 24 21:41:43 2012] xmm0018140101/analysis//spectral/fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src133_pl.csv not found, spectral fit skipped or did not complete