[Thu Aug 23 03:48:18 2012] Detection parameters:
  Position = (308.0, 294.0) = 20 57 12.27 31 0 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 230.2 +/- 28.0
  Background counts = 166.8
  Rate = 0.04 +/- 0.005

[Thu Aug 23 03:48:19 2012] Off-axis axis estimate = 0.76'
[Thu Aug 23 09:47:42 2012] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 09:47:42 2012] Initial guess for spatial extent in simple fitting = 6.81"
[Thu Aug 23 09:47:42 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.938
[Thu Aug 23 09:47:42 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 6.81"
[Thu Aug 23 17:02:12 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src23.ximg exists
[Thu Aug 23 17:02:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src23.csv
[Thu Aug 23 17:02:12 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Aug 23 17:02:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src23.csv
[Thu Aug 23 17:02:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 17:02:15 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Aug 23 17:02:15 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Aug 23 17:02:15 2012] Fit fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Aug 23 22:58:18 2012] Spatial fit model total counts = 3111.160000, observed total counts = 3111.000000
[Thu Aug 23 22:58:18 2012] Offset between fit and detection position for source 127 = 2.200594 pixels
[Thu Aug 23 22:58:18 2012] 3053.322000 total counts/ 2855.570000 bgd. counts: snr = 3.700620
Spatial fit parameters:
  Offset between fit and detection position for source 127 = 2.200594 pixels
  Position = (309.5, 295.6) = 20 57 11.76 31 1 6.5
  Extent = 13.6 (13.6-27.2)", rotation angle = 0
  Source counts = 197.8 +/- 55.3
  Background counts = 2855.6
  Rate = 0.03 +/- 0.009
[Thu Aug 23 22:58:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:19 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 22:58:19 2012] Source does appear to be extended
[Thu Aug 23 22:58:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:58:19 2012] Source is confused with source 130
[Fri Aug 24 05:06:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 05:06:29 2012] Initial guess for spatial extent in simple fitting = 13.62"
[Fri Aug 24 05:06:29 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.929
[Fri Aug 24 05:06:29 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 13.62"
[Fri Aug 24 11:03:04 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src23.ximg exists
[Fri Aug 24 11:03:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src23.csv
[Fri Aug 24 11:03:04 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri Aug 24 11:03:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src23.csv
[Fri Aug 24 11:03:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 11:03:07 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri Aug 24 11:03:07 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Aug 24 11:03:07 2012] Fit fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Aug 24 19:15:22 2012] Warning, spatial fit 23 centroid is now closest to src. 126
[Fri Aug 24 19:15:22 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:22 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 19:15:22 2012] Source does appear to be extended
[Fri Aug 24 19:15:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 20:01:26 2012] XMMSAS src. selection expression = ellipse(26875.830800, 25670.508200, 817.230024, 817.230024, 0.000000, X, Y)
[Fri Aug 24 20:01:26 2012] Writing source region out to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src127_src.reg
[Fri Aug 24 20:01:26 2012] Extracting stamp from image fullrun_mos1_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (263, 249) - (356, 343)
[Fri Aug 24 20:01:26 2012] XMMSAS bgd. selection expression = annulus(26875.830800, 25670.508200, 1362.050039, 2724.100078, X, Y) && !ellipse(24599.513200, 24699.100200, 1150.432033, 1150.432033, 0.000000, X, Y) && !ellipse(24509.708000, 27796.534000, 657.300019, 657.300019, 0.000000, X, Y) && !ellipse(24767.267800, 24958.084000, 2197.424063, 2197.424063, 0.000000, X, Y) && !ellipse(24854.433600, 29181.728800, 828.816024, 828.816024, 0.000000, X, Y) && !ellipse(24939.088400, 26713.980200, 1118.408032, 1118.408032, 0.000000, X, Y) && !ellipse(25903.824615, 29262.120728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24564.729240, 26771.260000, 1120.576032, 1120.576032, 0.000000, X, Y) && !ellipse(25017.567871, 28492.271088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26253.428000, 27705.094000, 1107.856032, 1107.856032, 0.000000, X, Y) && !ellipse(25101.625600, 26040.858000, 2233.280064, 2233.280064, 0.000000, X, Y) && !ellipse(24571.841553, 26230.170197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24148.909800, 27691.451600, 1264.000036, 1264.000036, 0.000000, X, Y) && !ellipse(24102.934000, 27526.810000, 2241.152064, 2241.152064, 0.000000, X, Y) && !ellipse(25138.023895, 27882.636536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26811.113800, 24871.284200, 1115.584032, 1115.584032, 0.000000, X, Y) && !ellipse(24814.222400, 29522.686000, 1454.608042, 1454.608042, 0.000000, X, Y) && !ellipse(23912.788940, 29092.023621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26508.867400, 26768.608000, 1994.432057, 1994.432057, 0.000000, X, Y) && !ellipse(26299.742584, 25869.317200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25204.126160, 23795.617188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26727.685600, 26112.630000, 1050.888030, 1050.888030, 0.000000, X, Y) && !ellipse(26423.087200, 22978.909800, 1230.728035, 1230.728035, 0.000000, X, Y) && !ellipse(24227.802856, 23711.436829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24748.809875, 23541.236176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25781.767609, 22890.427429, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 20:01:26 2012] Writing fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src127.gif
[Fri Aug 24 20:26:33 2012] Mean detx,y = (-1255.73, -2356.30) 
[Fri Aug 24 20:26:35 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 20:26:48 2012] grppha failed
[Fri Aug 24 20:26:48 2012] Setting source spectrum file to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src127_src.pi.gz
[Fri Aug 24 20:26:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src127_bgd.pi.gz
[Fri Aug 24 21:41:36 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:36 2012] Error reading totcts from fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src127_src.pi.gz
[Fri Aug 24 21:41:38 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:42 2012] Flag c found in src. 127 procflags, skipping spectral fitting
[Fri Aug 24 21:41:42 2012] Source 127 has no response, skipping
[Fri Aug 24 21:41:43 2012] xmm0018140101/analysis//spectral/fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src127_pl.csv not found, spectral fit skipped or did not complete