[Thu Aug 23 03:48:18 2012] Detection parameters:
  Position = (280.1, 313.0) = 20 57 21.70 31 2 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 330.6 +/- 26.2
  Background counts = 54.5
  Rate = 0.06 +/- 0.005

[Thu Aug 23 03:48:19 2012] Off-axis axis estimate = 1.70'
[Thu Aug 23 09:47:41 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 09:47:41 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Aug 23 09:47:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Thu Aug 23 09:47:41 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.28"
[Thu Aug 23 17:02:12 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src9.ximg exists
[Thu Aug 23 17:02:12 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Aug 23 17:02:12 2012] Fit fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_src9 appears to have run properly
[Thu Aug 23 17:02:15 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Aug 23 17:02:15 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Aug 23 17:02:15 2012] Fit fullrun_mos1_xmm0018140101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Aug 23 22:58:18 2012] Warning, spatial fit 9 centroid is now closest to src. 110
[Thu Aug 23 22:58:18 2012] Spatial fit model total counts = 2353.630000, observed total counts = 2352.000000
[Thu Aug 23 22:58:18 2012] Offset between fit and detection position for source 118 = 5.479499 pixels
[Thu Aug 23 22:58:18 2012] Warning, changing simple spatial fit ID from 9 to 13
[Thu Aug 23 22:58:18 2012] 2385.515000 total counts/ 2188.410000 bgd. counts: snr = 4.213406
Spatial fit parameters:
  Offset between fit and detection position for source 118 = 5.479499 pixels
  Position = (283.0, 308.4) = 20 57 20.72 31 2 2.1
  Extent = 14.0 (14.0-28.0)", rotation angle = 0
  Source counts = 197.1 +/- 48.8
  Background counts = 2188.4
  Rate = 0.03 +/- 0.008
[Thu Aug 23 22:58:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:58:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:58:19 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 22:58:19 2012] Source does appear to be extended
[Thu Aug 23 22:58:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:58:19 2012] Source is confused with source 120
[Fri Aug 24 05:06:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 05:06:29 2012] Initial guess for spatial extent in simple fitting = 14.01"
[Fri Aug 24 05:06:29 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.012
[Fri Aug 24 05:06:29 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 14.01"
[Fri Aug 24 11:03:04 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src9.ximg exists
[Fri Aug 24 11:03:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src9.csv
[Fri Aug 24 11:03:04 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Aug 24 11:03:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src9.csv
[Fri Aug 24 11:03:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 11:03:06 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Aug 24 11:03:06 2012] fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Aug 24 11:03:06 2012] Fit fullrun_mos1_xmm0018140101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Aug 24 19:15:21 2012] Warning, spatial fit 9 centroid is now closest to src. 101
[Fri Aug 24 19:15:22 2012] Spatial fit model total counts = 2355.230000, observed total counts = 2352.000000
[Fri Aug 24 19:15:22 2012] Offset between fit and detection position for source 118 = 0.170635 pixels
[Fri Aug 24 19:15:22 2012] Warning, changing simple spatial fit ID from 9 to 13
[Fri Aug 24 19:15:22 2012] 2279.422000 total counts/ 2066.190000 bgd. counts: snr = 4.691020
Spatial fit parameters:
  Offset between fit and detection position for source 118 = 0.170635 pixels
  Position = (282.9, 308.3) = 20 57 20.75 31 2 1.6
  Extent = 14.0 (14.0-28.0)", rotation angle = 0
  Source counts = 213.2 +/- 47.7
  Background counts = 2066.2
  Rate = 0.04 +/- 0.008
[Fri Aug 24 19:15:22 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 19:15:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 19:15:22 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 19:15:22 2012] Source does appear to be extended
[Fri Aug 24 19:15:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 20:01:25 2012] XMMSAS src. selection expression = ellipse(24564.729240, 26771.260000, 840.432024, 840.432024, 0.000000, X, Y)
[Fri Aug 24 20:01:25 2012] Writing source region out to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src118_src.reg
[Fri Aug 24 20:01:25 2012] Extracting stamp from image fullrun_mos1_xmm0018140101_pi300-10000_cl_sm2.00.img.gz, (235, 260) - (331, 357)
[Fri Aug 24 20:01:25 2012] XMMSAS bgd. selection expression = annulus(24564.729240, 26771.260000, 1400.720040, 2801.440081, X, Y) && !ellipse(24599.513200, 24699.100200, 1150.432033, 1150.432033, 0.000000, X, Y) && !ellipse(24509.708000, 27796.534000, 657.300019, 657.300019, 0.000000, X, Y) && !ellipse(24767.267800, 24958.084000, 2197.424063, 2197.424063, 0.000000, X, Y) && !ellipse(24854.433600, 29181.728800, 828.816024, 828.816024, 0.000000, X, Y) && !ellipse(24939.088400, 26713.980200, 1118.408032, 1118.408032, 0.000000, X, Y) && !ellipse(25903.824615, 29262.120728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25017.567871, 28492.271088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26253.428000, 27705.094000, 1107.856032, 1107.856032, 0.000000, X, Y) && !ellipse(25101.625600, 26040.858000, 2233.280064, 2233.280064, 0.000000, X, Y) && !ellipse(24571.841553, 26230.170197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24148.909800, 27691.451600, 1264.000036, 1264.000036, 0.000000, X, Y) && !ellipse(25060.488000, 29822.992000, 828.256024, 828.256024, 0.000000, X, Y) && !ellipse(24102.934000, 27526.810000, 2241.152064, 2241.152064, 0.000000, X, Y) && !ellipse(25138.023895, 27882.636536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26811.113800, 24871.284200, 1115.584032, 1115.584032, 0.000000, X, Y) && !ellipse(26875.830800, 25670.508200, 1089.640031, 1089.640031, 0.000000, X, Y) && !ellipse(25823.344000, 30561.180000, 1358.728039, 1358.728039, 0.000000, X, Y) && !ellipse(24814.222400, 29522.686000, 1454.608042, 1454.608042, 0.000000, X, Y) && !ellipse(23912.788940, 29092.023621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26508.867400, 26768.608000, 1994.432057, 1994.432057, 0.000000, X, Y) && !ellipse(26299.742584, 25869.317200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25204.126160, 23795.617188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26727.685600, 26112.630000, 1050.888030, 1050.888030, 0.000000, X, Y) && !ellipse(26423.087200, 22978.909800, 1230.728035, 1230.728035, 0.000000, X, Y) && !ellipse(24227.802856, 23711.436829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27121.447601, 29755.265869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25003.382000, 30853.141200, 1358.728039, 1358.728039, 0.000000, X, Y) && !ellipse(24748.809875, 23541.236176, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 20:01:25 2012] Writing fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src118.gif
[Fri Aug 24 20:12:41 2012] Mean detx,y = (-2090.53, 19.53) 
[Fri Aug 24 20:12:42 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 20:12:52 2012] grppha failed
[Fri Aug 24 20:12:52 2012] Setting source spectrum file to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src118_src.pi.gz
[Fri Aug 24 20:12:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src118_bgd.pi.gz
[Fri Aug 24 21:41:36 2012] Updating aperture counts using extracted products
[Fri Aug 24 21:41:36 2012] Error reading totcts from fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src118_src.pi.gz
[Fri Aug 24 21:41:38 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 21:41:42 2012] Flag c found in src. 118 procflags, skipping spectral fitting
[Fri Aug 24 21:41:42 2012] Source 118 has no response, skipping
[Fri Aug 24 21:41:43 2012] xmm0018140101/analysis//spectral/fullrun_mos1_xmm0018140101_pi300-10000_pass1_cl_src118_pl.csv not found, spectral fit skipped or did not complete