[Sat Jun  9 14:48:10 2012] Detection parameters:
  Position = (332.7, 421.7) = 18 51 39.03 0 16 35.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 381.7 +/- 23.9
  Background counts = 28.6
  Rate = 0.01 +/- 0.0009

[Sat Jun  9 14:48:10 2012] Off-axis axis estimate = 9.28'
[Sat Jun  9 14:52:00 2012] Using EEF radius (= 11.07 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 14:52:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  9 14:52:00 2012] Initial guess for spatial extent in simple fitting = 11.07"
[Sat Jun  9 14:52:00 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.971
[Sat Jun  9 14:52:00 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.07"
[Sat Jun  9 15:20:46 2012] fullrun_pn_xmm0017740401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  9 15:20:46 2012] fullrun_pn_xmm0017740401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  9 15:20:46 2012] Fit fullrun_pn_xmm0017740401_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Jun  9 15:20:46 2012] fullrun_pn_xmm0017740401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  9 15:20:46 2012] fullrun_pn_xmm0017740401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  9 15:20:46 2012] Fit fullrun_pn_xmm0017740401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun  9 16:02:31 2012] Spatial fit model total counts = 860.379000, observed total counts = 791.000000
[Sat Jun  9 16:02:31 2012] Offset between fit and detection position for source 1 = 0.309619 pixels
[Sat Jun  9 16:02:31 2012] 862.766000 total counts/ 578.725000 bgd. counts: snr = 11.807145
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.309619 pixels
  Position = (332.5, 421.5) = 18 51 39.10 0 16 34.0
  Extent = 5.4 (4.7-6.1)", rotation angle = 0
  Source counts = 284.0 +/- 29.4
  Background counts = 578.7
  Rate = 0.01 +/- 0.001
[Sat Jun  9 16:02:31 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 16:02:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 16:02:31 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 16:02:31 2012] Source does appear to be extended
[Sat Jun  9 16:02:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 16:02:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 16:02:48 2012] Initial guess for spatial extent in simple fitting = 5.44"
[Sat Jun  9 16:02:48 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.734
[Sat Jun  9 16:02:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.44"
[Sat Jun  9 16:32:23 2012] fullrun_pn_xmm0017740401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  9 16:32:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0017740401_pi300-10000_cl_pass1_src1.csv
[Sat Jun  9 16:32:23 2012] fullrun_pn_xmm0017740401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  9 16:32:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0017740401_pi300-10000_cl_pass1_src1.csv
[Sat Jun  9 16:32:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0017740401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0017740401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 16:32:23 2012] fullrun_pn_xmm0017740401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  9 16:32:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0017740401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun  9 16:32:23 2012] fullrun_pn_xmm0017740401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  9 16:32:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0017740401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun  9 16:32:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0017740401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0017740401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 17:11:04 2012] Spatial fit model total counts = 690.679000, observed total counts = 623.000000
[Sat Jun  9 17:11:04 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  9 17:11:04 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 17:11:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 17:11:04 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 17:11:04 2012] Source does appear to be extended
[Sat Jun  9 17:11:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 17:11:21 2012] XMMSAS src. selection expression = ellipse(28877.873600, 36621.237200, 326.462409, 326.462409, 0.000000, X, Y)
[Sat Jun  9 17:11:21 2012] Writing source region out to fullrun_pn_xmm0017740401_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun  9 17:11:21 2012] Extracting stamp from image fullrun_pn_xmm0017740401_pi300-10000_cl_sm2.00.img.gz, (314, 403) - (351, 440)
[Sat Jun  9 17:11:21 2012] XMMSAS bgd. selection expression = annulus(28877.873600, 36621.237200, 544.104016, 1088.208031, X, Y)
[Sat Jun  9 17:11:21 2012] Writing fullrun_pn_xmm0017740401_pi300-10000_pass1_cl_src1.gif
[Sat Jun  9 17:11:44 2012] Mean detx,y = (1037.43, -9428.79) 
[Sat Jun  9 17:11:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 17:12:09 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 17:12:10 2012] Setting source spectrum file to fullrun_pn_xmm0017740401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  9 17:12:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0017740401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun  9 18:15:00 2012] Updating aperture counts using extracted products
[Sat Jun  9 18:15:00 2012] Error reading totcts from fullrun_pn_xmm0017740401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  9 18:15:01 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 18:15:01 2012] Using photon index=1.80, rate=0.011, arf fullrun_pn_xmm0017740401_pi300-10000_pass1_cl_src1.arf
[Sat Jun  9 18:15:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 18:15:01 2012] Updating source flux to 6.1e-14
[Sat Jun  9 18:15:46 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Sat Jun  9 18:16:57 2012] Reading fit data from xmm0017740401/analysis//spectral/fullrun_pn_xmm0017740401_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun  9 18:16:57 2012] Spectral fit parameter nH value = 6.08954e+21
[Sat Jun  9 18:16:57 2012] Spectral fit parameter PhoIndex value = 1.98211
[Sat Jun  9 18:16:57 2012] Failed to get F(0.3-8.0) from xmm0017740401/analysis//spectral/fullrun_pn_xmm0017740401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun  9 18:16:57 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 18:16:57 2012] Using Nh = 6.1e+21, photon index=1.98, rate=0.011, arf fullrun_pn_xmm0017740401_pi300-10000_pass1_cl_src1.arf
[Sat Jun  9 18:16:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 18:16:57 2012] Updating source flux to 1.1e-13