[Wed Jul 11 11:25:20 2012] Detection parameters: Position = (309.7, 266.0) = 9 45 21.15 -8 39 44.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 97.0 +/- 13.8 Background counts = 20.6 Rate = 0.03 +/- 0.004 [Wed Jul 11 11:25:20 2012] Off-axis axis estimate = 2.49' [Wed Jul 11 11:26:43 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting [Wed Jul 11 11:26:43 2012] Initial guess for spatial extent in simple fitting = 7.67" [Wed Jul 11 11:26:43 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.975 [Wed Jul 11 11:26:43 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.67" [Wed Jul 11 12:58:41 2012] fullrun_pn_xmm0017540101_pi300-10000_cl_pass0_src13.ximg exists [Wed Jul 11 12:58:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0017540101_pi300-10000_cl_pass0_src13.csv [Wed Jul 11 12:58:42 2012] fullrun_pn_xmm0017540101_pi300-10000_cl_pass0_src13_1.ximg exists [Wed Jul 11 12:58:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0017540101_pi300-10000_cl_pass0_src13.csv [Wed Jul 11 12:58:42 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0017540101_pi300-10000_cl_pass0_src13_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0017540101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jul 11 12:58:42 2012] fullrun_pn_xmm0017540101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists [Wed Jul 11 12:58:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0017540101_pi300-10000_cl_pass0_tfrozen_src13.csv [Wed Jul 11 12:58:42 2012] fullrun_pn_xmm0017540101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists [Wed Jul 11 12:58:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0017540101_pi300-10000_cl_pass0_tfrozen_src13.csv [Wed Jul 11 12:58:42 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0017540101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0017540101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jul 11 16:01:45 2012] Source 14 is offset by -2.120914 and 2.760563 pixels which is larger than 2 X fitted extent = 9.791081 x 1.223885, not incorporating fit results [Wed Jul 11 16:01:45 2012] Source 14 is offset by 3.509959 and -3.190724 pixels which is larger than 2 X fitted extent = 0.895025 x 0.895025, not incorporating fit results [Wed Jul 11 16:01:45 2012] Warning, spatial fit 13 centroid is now closest to src. 1 [Wed Jul 11 16:01:45 2012] Spatial fit model total counts = 492.816000, observed total counts = 460.000000 [Wed Jul 11 16:01:45 2012] Offset between fit and detection position for source 14 = 4.370906 pixels [Wed Jul 11 16:01:45 2012] Warning, changing simple spatial fit ID from 13 to 29 [Wed Jul 11 16:01:45 2012] 488.709100 total counts/ 391.601000 bgd. counts: snr = 4.907198 Spatial fit parameters: Offset between fit and detection position for source 14 = 4.370906 pixels Position = (308.7, 270.2) = 9 45 21.43 -8 39 27.9 Extent = 15.8 (15.7-31.5)", rotation angle = 0 Source counts = 97.1 +/- 22.1 Background counts = 391.6 Rate = 0.02 +/- 0.004 [Wed Jul 11 16:01:45 2012] Vigneting correction estimate = 1.000000 [Wed Jul 11 16:01:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jul 11 16:01:45 2012] Assessing source extent using major axis lower bound [Wed Jul 11 16:01:45 2012] Source does appear to be extended [Wed Jul 11 16:01:45 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jul 11 16:01:45 2012] Source is confused with source 1 [Wed Jul 11 16:02:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Jul 11 16:02:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Jul 11 16:02:07 2012] Initial guess for spatial extent in simple fitting = 15.77" [Wed Jul 11 16:02:07 2012] source mask rpix=3.6, npix_max = 68, mask sum = 26, frac = 0.382 [Wed Jul 11 16:02:07 2012] Skipping simple spatial due to low active detector fraction [Wed Jul 11 19:25:16 2012] Source 14 is offset by -0.042897 and -4.544349 pixels which is larger than 2 X fitted extent = 0.909986 x 0.909986, not incorporating fit results [Wed Jul 11 19:25:16 2012] Vigneting correction estimate = 1.000000 [Wed Jul 11 19:25:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jul 11 19:25:16 2012] Assessing source extent using major axis lower bound [Wed Jul 11 19:25:16 2012] Source does appear to be extended [Wed Jul 11 19:25:16 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jul 11 19:25:33 2012] XMMSAS src. selection expression = ellipse(26812.538000, 23462.546000, 946.440027, 946.440027, 0.000000, X, Y) [Wed Jul 11 19:25:33 2012] Writing source region out to fullrun_pn_xmm0017540101_pi300-10000_pass1_cl_src14_src.reg [Wed Jul 11 19:25:33 2012] Extracting stamp from image fullrun_pn_xmm0017540101_pi300-10000_cl_sm2.00.img.gz, (254, 216) - (363, 325) [Wed Jul 11 19:25:33 2012] XMMSAS bgd. selection expression = annulus(26812.538000, 23462.546000, 1577.400045, 3154.800091, X, Y) && !ellipse(26226.222168, 23642.129944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25613.183000, 23534.450000, 1172.368034, 1172.368034, 0.000000, X, Y) && !ellipse(25985.097717, 22656.646790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24884.136000, 24130.154700, 1158.856033, 1158.856033, 0.000000, X, Y) && !ellipse(26257.076000, 24213.036000, 1134.696033, 435.327213, 90.000000, X, Y) && !ellipse(25042.928400, 23923.032800, 1184.936034, 1184.936034, 0.000000, X, Y) && !ellipse(25909.598000, 24408.732000, 1371.536039, 1081.160031, 58.883116, X, Y) && !ellipse(25094.335388, 25344.510834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24241.818756, 24656.000671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26768.294189, 24571.376923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25879.416931, 25508.018158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26434.880920, 25009.862976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24194.824738, 22837.964050, 870.000000, 870.000000, 0.000000, X, Y) [Wed Jul 11 19:25:33 2012] Writing fullrun_pn_xmm0017540101_pi300-10000_pass1_cl_src14.gif [Wed Jul 11 19:31:57 2012] Mean detx,y = (-653.78, -977.50) [Wed Jul 11 19:31:59 2012] Setting backscal keywords in source and bgd. spectrum [Wed Jul 11 19:32:37 2012] Binned source spectrum to 10 counts/bin [Wed Jul 11 19:32:38 2012] Setting source spectrum file to fullrun_pn_xmm0017540101_pi300-10000_pass1_cl_src14_src_b10.pi.gz [Wed Jul 11 19:32:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0017540101_pi300-10000_pass1_cl_src14_bgd.pi.gz [Wed Jul 11 20:15:34 2012] Not generating rmf since there are only 97 counts [Wed Jul 11 20:15:34 2012] rmf not generated due to insufficient counts [Wed Jul 11 21:11:46 2012] Updating aperture counts using extracted products [Wed Jul 11 21:11:46 2012] Error reading totcts from fullrun_pn_xmm0017540101_pi300-10000_pass1_cl_src14_src_b10.pi.gz [Wed Jul 11 21:11:47 2012] Calculating source flux in energy range 0.30-8.00 [Wed Jul 11 21:11:47 2012] Using photon index=1.80, rate=0.0194, arf fullrun_pn_xmm0017540101_pi300-10000_pass1_cl_src14.arf [Wed Jul 11 21:11:47 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jul 11 21:11:47 2012] Updating source flux to 1.2e-13 [Wed Jul 11 21:12:10 2012] Flag b found in src. 14 procflags, skipping spectral fitting [Wed Jul 11 21:12:10 2012] Flag c found in src. 14 procflags, skipping spectral fitting [Wed Jul 11 21:12:10 2012] Source 14 has fewer than 100.000000 counts, skipping spectral fitting