[Wed Jul 11 11:26:01 2012] Detection parameters:
  Position = (217.3, 147.2) = 9 45 48.26 -8 48 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.6 +/- 8.9
  Background counts = 1.6
  Rate = 0.007 +/- 0.001

[Wed Jul 11 11:26:01 2012] Off-axis axis estimate = 12.44'
[Wed Jul 11 14:32:02 2012] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 14:32:02 2012] Initial guess for spatial extent in simple fitting = 12.65"
[Wed Jul 11 14:32:02 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.055
[Wed Jul 11 14:32:02 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 12.65"
[Wed Jul 11 16:01:37 2012] fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_src20.ximg exists
[Wed Jul 11 16:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_src20.csv
[Wed Jul 11 16:01:37 2012] fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed Jul 11 16:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_src20.csv
[Wed Jul 11 16:01:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 16:01:38 2012] fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed Jul 11 16:01:38 2012] fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed Jul 11 16:01:38 2012] Fit fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Wed Jul 11 16:01:58 2012] Spatial fit model total counts = 72.638400, observed total counts = 72.000000
[Wed Jul 11 16:01:58 2012] Offset between fit and detection position for source 26 = 0.253097 pixels
[Wed Jul 11 16:01:58 2012] 71.796500 total counts/ 30.746300 bgd. counts: snr = 7.403189
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.253097 pixels
  Position = (217.2, 147.4) = 9 45 48.29 -8 48 22.1
  Extent = 6.8 (5.1-9.0)", rotation angle = 0
  Source counts = 41.1 +/- 8.5
  Background counts = 30.7
  Rate = 0.005 +/- 0.001
[Wed Jul 11 16:01:58 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 16:01:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 16:01:58 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 16:01:58 2012] Source does appear to be extended
[Wed Jul 11 16:01:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 18:23:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 18:23:57 2012] Initial guess for spatial extent in simple fitting = 6.81"
[Wed Jul 11 18:23:57 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.171
[Wed Jul 11 18:23:57 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 6.81"
[Wed Jul 11 19:25:09 2012] fullrun_mos2_xmm0017540101_pi300-10000_cl_pass1_src15.ximg exists
[Wed Jul 11 19:25:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0017540101_pi300-10000_cl_pass1_src15.csv
[Wed Jul 11 19:25:09 2012] fullrun_mos2_xmm0017540101_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Jul 11 19:25:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0017540101_pi300-10000_cl_pass1_src15.csv
[Wed Jul 11 19:25:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0017540101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0017540101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 19:25:10 2012] fullrun_mos2_xmm0017540101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Jul 11 19:25:10 2012] fullrun_mos2_xmm0017540101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Jul 11 19:25:10 2012] Fit fullrun_mos2_xmm0017540101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Jul 11 19:25:25 2012] Warning, spatial fit 15 centroid is now closest to src. 29
[Wed Jul 11 19:25:26 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 19:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 19:25:26 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 19:25:26 2012] Source does appear to be extended
[Wed Jul 11 19:25:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 21:04:21 2012] XMMSAS src. selection expression = ellipse(18847.828200, 12778.844200, 408.864012, 408.864012, 0.000000, X, Y)
[Wed Jul 11 21:04:21 2012] Writing source region out to fullrun_mos2_xmm0017540101_pi300-10000_pass1_cl_src26_src.reg
[Wed Jul 11 21:04:21 2012] Extracting stamp from image fullrun_mos2_xmm0017540101_pi300-10000_cl_sm2.00.img.gz, (194, 124) - (241, 171)
[Wed Jul 11 21:04:21 2012] XMMSAS bgd. selection expression = annulus(18847.828200, 12778.844200, 681.440020, 1362.880039, X, Y)
[Wed Jul 11 21:04:21 2012] Writing fullrun_mos2_xmm0017540101_pi300-10000_pass1_cl_src26.gif
[Wed Jul 11 21:06:27 2012] Mean detx,y = (-10823.15, 7222.67) 
[Wed Jul 11 21:06:28 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 21:06:44 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 21:06:44 2012] Setting source spectrum file to fullrun_mos2_xmm0017540101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Jul 11 21:06:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0017540101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Wed Jul 11 21:10:16 2012] Not generating rmf since there are only 41 counts
[Wed Jul 11 21:10:16 2012] rmf not generated due to insufficient counts
[Wed Jul 11 21:11:47 2012] Updating aperture counts using extracted products
[Wed Jul 11 21:11:47 2012] Error reading totcts from fullrun_mos2_xmm0017540101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Jul 11 21:11:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 11 21:11:48 2012] Using photon index=1.80, rate=0.00539, arf fullrun_mos2_xmm0017540101_pi300-10000_pass1_cl_src26.arf
[Wed Jul 11 21:11:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 11 21:11:48 2012] Updating source flux to 1.5e-13
[Wed Jul 11 21:12:09 2012] Source 26 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jul 11 21:12:10 2012] xmm0017540101/analysis//spectral/fullrun_mos2_xmm0017540101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete