[Wed Jul 11 11:26:01 2012] Detection parameters:
  Position = (284.0, 272.8) = 9 45 28.69 -8 39 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.3 +/- 14.3
  Background counts = 16.2
  Rate = 0.02 +/- 0.002

[Wed Jul 11 11:26:01 2012] Off-axis axis estimate = 2.14'
[Wed Jul 11 14:32:02 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 14:32:02 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Wed Jul 11 14:32:02 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.809
[Wed Jul 11 14:32:02 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.50"
[Wed Jul 11 16:01:37 2012] fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jul 11 16:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_src5.csv
[Wed Jul 11 16:01:37 2012] fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jul 11 16:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_src5.csv
[Wed Jul 11 16:01:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 16:01:37 2012] fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jul 11 16:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jul 11 16:01:37 2012] fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jul 11 16:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jul 11 16:01:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0017540101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 16:01:58 2012] Warning, spatial fit 5 centroid is now closest to src. 22
[Wed Jul 11 16:01:58 2012] Spatial fit model total counts = 515.360000, observed total counts = 476.000000
[Wed Jul 11 16:01:58 2012] Offset between fit and detection position for source 19 = 0.545111 pixels
[Wed Jul 11 16:01:58 2012] Warning, changing simple spatial fit ID from 5 to 18
[Wed Jul 11 16:01:58 2012] 459.648400 total counts/ 438.328000 bgd. counts: snr = 1.018347
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.545111 pixels
  Position = (283.6, 272.3) = 9 45 28.79 -8 39 18.8
  Extent = 3.7" x 2.4", rotation angle = 90
  Source counts = 21.3 +/- 21.4
  Background counts = 438.3
  Rate = 0.003 +/- 0.003
  Deleting source due to low Poisson probability