[Mon Jun 24 01:27:42 2013] Detection parameters:
  Position = (282.7, 275.9) = 4 47 48.62 -6 28 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1970.6 +/- 54.9
  Background counts = 107.8
  Rate = 0.07 +/- 0.002

[Mon Jun 24 01:27:42 2013] Off-axis axis estimate = 1.99'
[Mon Jun 24 02:00:56 2013] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 02:00:56 2013] Initial guess for spatial extent in simple fitting = 7.42"
[Mon Jun 24 02:00:56 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.822
[Mon Jun 24 02:00:56 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.42"
[Mon Jun 24 02:14:14 2013] fullrun_mos2_xmm0014740601_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 24 02:14:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0014740601_pi300-10000_cl_pass0_src1.csv
[Mon Jun 24 02:14:14 2013] fullrun_mos2_xmm0014740601_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 24 02:14:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0014740601_pi300-10000_cl_pass0_src1.csv
[Mon Jun 24 02:14:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0014740601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0014740601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 02:14:14 2013] fullrun_mos2_xmm0014740601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 24 02:14:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0014740601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 24 02:14:14 2013] fullrun_mos2_xmm0014740601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 24 02:14:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0014740601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 24 02:14:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0014740601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0014740601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 02:14:24 2013] Source 1 is offset by -4.777345 and -7.888829 pixels which is larger than
2 X fitted extent = 0.853278 x 0.853278, not incorporating fit results
[Mon Jun 24 02:14:24 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 02:14:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 02:14:24 2013] Assessing source extent using major
[Mon Jun 24 02:14:24 2013] Source does appear to be extended
[Mon Jun 24 02:14:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 02:43:45 2013] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 02:43:45 2013] Initial guess for spatial extent in simple fitting = 7.42"
[Mon Jun 24 02:43:45 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.822
[Mon Jun 24 02:43:45 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.42"
[Mon Jun 24 02:56:30 2013] fullrun_mos2_xmm0014740601_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 24 02:56:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0014740601_pi300-10000_cl_pass1_src1.csv
[Mon Jun 24 02:56:30 2013] fullrun_mos2_xmm0014740601_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 24 02:56:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0014740601_pi300-10000_cl_pass1_src1.csv
[Mon Jun 24 02:56:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0014740601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0014740601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 02:56:31 2013] fullrun_mos2_xmm0014740601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 24 02:56:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0014740601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 24 02:56:31 2013] fullrun_mos2_xmm0014740601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 24 02:56:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0014740601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 24 02:56:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0014740601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0014740601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 02:56:40 2013] Source 1 is offset by -6.108403 and -7.888829 pixels which is larger than
2 X fitted extent = 0.853278 x 0.853278, not incorporating fit results
[Mon Jun 24 02:56:40 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 02:56:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 02:56:40 2013] Assessing source extent using major
[Mon Jun 24 02:56:40 2013] Source does appear to be extended
[Mon Jun 24 02:56:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 04:15:05 2013] Counts = 1970.594360, rescaling region sizes by 2.000000
[Mon Jun 24 04:15:05 2013] XMMSAS src. selection expression = ellipse(24547.948944, 23958.051880, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 24 04:15:05 2013] Writing source region out to fullrun_mos2_xmm0014740601_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 24 04:15:05 2013] Extracting stamp from image fullrun_mos2_xmm0014740601_pi300-10000_cl_sm2.00.img.gz, (208, 201) - (358, 351)
[Mon Jun 24 04:15:05 2013] XMMSAS bgd. selection expression = annulus(24547.948944, 23958.051880, 4350.000000, 8700.000000, X, Y) && !ellipse(30433.352386, 22056.345993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21277.024240, 20149.160000, 309.298409, 309.298409, 0.000000, X, Y) && !ellipse(31008.163574, 17704.111786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19436.524180, 28180.210800, 271.570408, 271.570408, 0.000000, X, Y)
[Mon Jun 24 04:15:05 2013] Writing fullrun_mos2_xmm0014740601_pi300-10000_pass1_cl_src1.gif
[Mon Jun 24 04:15:11 2013] Mean detx,y = (34.13, 462.80) 
[Mon Jun 24 04:15:13 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 24 04:18:59 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 24 04:19:00 2013] Setting source spectrum file to fullrun_mos2_xmm0014740601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 24 04:19:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0014740601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 24 04:21:24 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 24 04:21:24 2013] rmf not generated due to insufficient counts
[Mon Jun 24 04:28:50 2013] Updating aperture counts using extracted products
[Mon Jun 24 04:28:50 2013] Total counts from fullrun_mos2_xmm0014740601_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 2428.00
[Mon Jun 24 04:28:50 2013] Total counts from fullrun_mos2_xmm0014740601_pi300-10000_pass1_cl_src1_bgd.pi.gz = 36947.00
[Mon Jun 24 04:28:50 2013] Got source and background scale factors 4957312.000000, 160803560.000000
[Mon Jun 24 04:28:50 2013] User source parameters:
  Position = (282.7, 275.9) = 4 47 48.62 -6 28 11.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1289.0 +/- 50.3
  Background aperture counts = 1139.0
  Rate = 0.08 +/- 0.003

[Mon Jun 24 04:28:50 2013] Updating counts from extracted products
[Mon Jun 24 04:28:50 2013] Set source signif. to 1288.98/33.75 = 38.19
[Mon Jun 24 04:28:52 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 24 04:28:52 2013] Using photon index=1.80, rate=0.0761, arf fullrun_mos2_xmm0014740601_pi300-10000_pass1_cl_src1.arf
[Mon Jun 24 04:28:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 24 04:28:52 2013] Updating source flux to 7.1e-13
[Mon Jun 24 04:28:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 24 04:28:55 2013] xmm0014740601/analysis//spectral/fullrun_mos2_xmm0014740601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete