[Sun Jul 15 16:56:54 2012] Detection parameters:
  Position = (297.8, 245.9) = 17 30 13.87 74 18 0.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.6 +/- 14.9
  Background counts = 50.5
  Rate = 0.009 +/- 0.002

[Sun Jul 15 16:56:54 2012] Off-axis axis estimate = 3.81'
[Sun Jul 15 17:29:18 2012] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 17:29:18 2012] Initial guess for spatial extent in simple fitting = 8.33"
[Sun Jul 15 17:29:18 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.071
[Sun Jul 15 17:29:18 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.33"
[Sun Jul 15 17:50:57 2012] fullrun_mos2_xmm0014150401_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jul 15 17:50:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0014150401_pi300-10000_cl_pass0_src10.csv
[Sun Jul 15 17:50:57 2012] fullrun_mos2_xmm0014150401_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jul 15 17:50:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0014150401_pi300-10000_cl_pass0_src10.csv
[Sun Jul 15 17:50:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0014150401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0014150401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:50:57 2012] fullrun_mos2_xmm0014150401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jul 15 17:50:57 2012] fullrun_mos2_xmm0014150401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jul 15 17:50:57 2012] Fit fullrun_mos2_xmm0014150401_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Jul 15 17:51:02 2012] Spatial fit model total counts = 68.994600, observed total counts = 69.000000
[Sun Jul 15 17:51:02 2012] Offset between fit and detection position for source 7 = 0.125120 pixels
[Sun Jul 15 17:51:02 2012] 67.150100 total counts/ 42.870200 bgd. counts: snr = 3.708251
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.125120 pixels
  Position = (297.8, 246.0) = 17 30 13.79 74 18 0.6
  Extent = 5.8 (3.8-9.9)", rotation angle = 0
  Source counts = 24.3 +/- 8.2
  Background counts = 42.9
  Rate = 0.007 +/- 0.002
[Sun Jul 15 17:51:02 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:51:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:51:02 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 17:51:02 2012] Source does appear to be extended
[Sun Jul 15 17:51:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 18:28:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 18:28:36 2012] Initial guess for spatial extent in simple fitting = 5.81"
[Sun Jul 15 18:28:36 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.187
[Sun Jul 15 18:28:36 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 5.81"
[Sun Jul 15 18:51:04 2012] fullrun_mos2_xmm0014150401_pi300-10000_cl_pass1_src9.ximg exists
[Sun Jul 15 18:51:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0014150401_pi300-10000_cl_pass1_src9.csv
[Sun Jul 15 18:51:04 2012] fullrun_mos2_xmm0014150401_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Jul 15 18:51:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0014150401_pi300-10000_cl_pass1_src9.csv
[Sun Jul 15 18:51:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0014150401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0014150401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 18:51:04 2012] fullrun_mos2_xmm0014150401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Jul 15 18:51:04 2012] fullrun_mos2_xmm0014150401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Jul 15 18:51:04 2012] Fit fullrun_mos2_xmm0014150401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Jul 15 18:51:10 2012] Warning, spatial fit 9 centroid is now closest to src. 5
[Sun Jul 15 18:51:10 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 18:51:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 18:51:10 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 18:51:10 2012] Source does appear to be extended
[Sun Jul 15 18:51:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 19:07:36 2012] XMMSAS src. selection expression = ellipse(25862.403360, 21350.357400, 348.598810, 348.598810, 0.000000, X, Y)
[Sun Jul 15 19:07:36 2012] Writing source region out to fullrun_mos2_xmm0014150401_pi300-10000_pass1_cl_src7_src.reg
[Sun Jul 15 19:07:36 2012] Extracting stamp from image fullrun_mos2_xmm0014150401_pi300-10000_cl_sm2.00.img.gz, (278, 226) - (318, 266)
[Sun Jul 15 19:07:36 2012] XMMSAS bgd. selection expression = annulus(25862.403360, 21350.357400, 580.998017, 1161.996033, X, Y)
[Sun Jul 15 19:07:36 2012] Writing fullrun_mos2_xmm0014150401_pi300-10000_pass1_cl_src7.gif
[Sun Jul 15 19:15:03 2012] Mean detx,y = (5621.82, -445.38) 
[Sun Jul 15 19:15:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 19:15:14 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 19:15:14 2012] Setting source spectrum file to fullrun_mos2_xmm0014150401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jul 15 19:15:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0014150401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Jul 15 19:19:54 2012] Not generating rmf since there are only 24 counts
[Sun Jul 15 19:19:54 2012] rmf not generated due to insufficient counts
[Sun Jul 15 19:20:21 2012] Updating aperture counts using extracted products
[Sun Jul 15 19:20:21 2012] Error reading totcts from fullrun_mos2_xmm0014150401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jul 15 19:20:21 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 19:20:21 2012] Using photon index=1.80, rate=0.0065, arf fullrun_mos2_xmm0014150401_pi300-10000_pass1_cl_src7.arf
[Sun Jul 15 19:20:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 19:20:21 2012] Updating source flux to 1e-13
[Sun Jul 15 19:20:23 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting