[Sun Jul 15 16:56:54 2012] Detection parameters:
  Position = (156.6, 188.1) = 17 32 44.49 74 13 45.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1691.0 +/- 51.7
  Background counts = 42.2
  Rate = 0.1 +/- 0.004

[Sun Jul 15 16:56:54 2012] Off-axis axis estimate = 13.03'
[Sun Jul 15 17:29:18 2012] Using EEF radius (= 12.94 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 17:29:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 15 17:29:18 2012] Initial guess for spatial extent in simple fitting = 12.94"
[Sun Jul 15 17:29:18 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.014
[Sun Jul 15 17:29:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.94"
[Sun Jul 15 17:50:57 2012] fullrun_mos2_xmm0014150401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 15 17:50:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0014150401_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 17:50:57 2012] fullrun_mos2_xmm0014150401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 15 17:50:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0014150401_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 17:50:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0014150401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0014150401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:50:57 2012] fullrun_mos2_xmm0014150401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 15 17:50:57 2012] fullrun_mos2_xmm0014150401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 15 17:50:57 2012] Fit fullrun_mos2_xmm0014150401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul 15 17:51:02 2012] Spatial fit model total counts = 1309.550000, observed total counts = 1213.000000
[Sun Jul 15 17:51:02 2012] Offset between fit and detection position for source 1 = 3.370225 pixels
[Sun Jul 15 17:51:02 2012] 1317.572000 total counts/ 192.702000 bgd. counts: snr = 81.032497
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.370225 pixels
  Position = (159.8, 187.1) = 17 32 41.07 74 13 41.3
  Extent = 18.6 (17.4-19.6)", rotation angle = 0
  Source counts = 1124.9 +/- 36.3
  Background counts = 192.7
  Rate = 0.3 +/- 0.01
[Sun Jul 15 17:51:02 2012] Spatial fit model total counts = 1085.320000, observed total counts = 1005.000000
[Sun Jul 15 17:51:02 2012] Offset between fit and detection position for source 1 = 1.478385 pixels
[Sun Jul 15 17:51:02 2012] Warning, changing simple spatial fit ID from 1 to 2
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.478385 pixels
  Position = (159.0, 188.3) = 17 32 41.90 74 13 46.7
  Extent = 18.6 (17.7-20.0)", rotation angle = 0
  Source counts = 1085.7 +/- 32.9
  Background counts = 0.0
  Rate = 0.3 +/- 0.009
[Sun Jul 15 17:51:02 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:51:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:51:02 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 17:51:02 2012] Source does appear to be extended
[Sun Jul 15 17:51:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 17:51:02 2012] Source is confused with source 10
[Sun Jul 15 18:28:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 18:28:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 15 18:28:36 2012] Initial guess for spatial extent in simple fitting = 18.64"
[Sun Jul 15 18:28:36 2012] source mask rpix=4.3, npix_max = 91, mask sum = 81, frac = 0.884
[Sun Jul 15 18:28:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 18.64"
[Sun Jul 15 18:51:04 2012] fullrun_mos2_xmm0014150401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 15 18:51:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0014150401_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 18:51:04 2012] fullrun_mos2_xmm0014150401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 15 18:51:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0014150401_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 18:51:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0014150401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0014150401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 18:51:04 2012] fullrun_mos2_xmm0014150401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 15 18:51:04 2012] fullrun_mos2_xmm0014150401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 15 18:51:04 2012] Fit fullrun_mos2_xmm0014150401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 15 18:51:10 2012] Spatial fit model total counts = 1551.050000, observed total counts = 1449.000000
[Sun Jul 15 18:51:10 2012] Offset between fit and detection position for source 1 = 1.103193 pixels
[Sun Jul 15 18:51:10 2012] 1550.825000 total counts/ 400.935000 bgd. counts: snr = 57.427421
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.103193 pixels
  Position = (159.6, 187.3) = 17 32 41.32 74 13 42.5
  Extent = 18.3 (17.4-19.2)", rotation angle = 0
  Source counts = 1149.9 +/- 39.4
  Background counts = 400.9
  Rate = 0.3 +/- 0.01
[Sun Jul 15 18:51:10 2012] Spatial fit model total counts = 1108.570000, observed total counts = 1005.000000
[Sun Jul 15 18:51:10 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 15 18:51:10 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 18:51:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 18:51:10 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 18:51:10 2012] Source does appear to be extended
[Sun Jul 15 18:51:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 19:07:36 2012] Counts = 1149.890000, rescaling region sizes by 2.000000
[Sun Jul 15 19:07:36 2012] XMMSAS src. selection expression = ellipse(13832.682400, 16250.627000, 2190.672063, 2190.672063, 0.000000, X, Y)
[Sun Jul 15 19:07:36 2012] Writing source region out to fullrun_mos2_xmm0014150401_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul 15 19:07:36 2012] Extracting stamp from image fullrun_mos2_xmm0014150401_pi300-10000_cl_sm2.00.img.gz, (34, 61) - (285, 313)
[Sun Jul 15 19:07:36 2012] XMMSAS bgd. selection expression = annulus(13832.682400, 16250.627000, 7302.240210, 14604.480420, X, Y) && !ellipse(14138.808350, 15955.606400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24028.343781, 26817.088318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21587.264400, 20508.272200, 242.608807, 242.608807, 0.000000, X, Y) && !ellipse(22668.273163, 26538.225281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12709.324646, 17199.232742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25862.403360, 21350.357400, 464.798413, 464.798413, 0.000000, X, Y)
[Sun Jul 15 19:07:36 2012] Writing fullrun_mos2_xmm0014150401_pi300-10000_pass1_cl_src1.gif
[Sun Jul 15 19:07:37 2012] Mean detx,y = (7612.83, 12460.50) 
[Sun Jul 15 19:07:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 19:11:38 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 19:11:38 2012] Setting source spectrum file to fullrun_mos2_xmm0014150401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 15 19:11:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0014150401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul 15 19:20:21 2012] Updating aperture counts using extracted products
[Sun Jul 15 19:20:21 2012] Error reading totcts from fullrun_mos2_xmm0014150401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 15 19:20:21 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 19:20:21 2012] Using photon index=1.80, rate=0.308, arf fullrun_mos2_xmm0014150401_pi300-10000_pass1_cl_src1.arf
[Sun Jul 15 19:20:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 19:20:21 2012] Updating source flux to 7.4e-12
[Sun Jul 15 19:20:23 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Sun Jul 15 19:20:23 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Jul 15 19:20:35 2012] Reading fit data from xmm0014150401/analysis//spectral/fullrun_mos2_xmm0014150401_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jul 15 19:20:35 2012] Spectral fit parameter nH value = 4.73365e+21
[Sun Jul 15 19:20:35 2012] Spectral fit parameter PhoIndex value = 4.45669
[Sun Jul 15 19:20:35 2012] Failed to get F(0.3-8.0) from xmm0014150401/analysis//spectral/fullrun_mos2_xmm0014150401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jul 15 19:20:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 19:20:35 2012] Using Nh = 4.7e+21, photon index=4.46, rate=0.308, arf fullrun_mos2_xmm0014150401_pi300-10000_pass1_cl_src1.arf
[Sun Jul 15 19:20:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 19:20:35 2012] Updating source flux to 4.8e-12