[Sun Jul 15 16:56:36 2012] Detection parameters:
  Position = (260.8, 305.3) = 17 30 53.66 74 22 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.1 +/- 16.3
  Background counts = 48.7
  Rate = 0.01 +/- 0.001

[Sun Jul 15 16:56:36 2012] Off-axis axis estimate = 2.77'
[Sun Jul 15 17:10:00 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 17:10:00 2012] Initial guess for spatial extent in simple fitting = 7.82"
[Sun Jul 15 17:10:00 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.901
[Sun Jul 15 17:10:00 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.82"
[Sun Jul 15 17:29:18 2012] fullrun_mos1_xmm0014150401_pi300-10000_cl_pass0_src6.ximg exists
[Sun Jul 15 17:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0014150401_pi300-10000_cl_pass0_src6.csv
[Sun Jul 15 17:29:18 2012] fullrun_mos1_xmm0014150401_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Jul 15 17:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0014150401_pi300-10000_cl_pass0_src6.csv
[Sun Jul 15 17:29:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0014150401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0014150401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:29:18 2012] fullrun_mos1_xmm0014150401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Jul 15 17:29:18 2012] fullrun_mos1_xmm0014150401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jul 15 17:29:18 2012] Fit fullrun_mos1_xmm0014150401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Jul 15 17:51:01 2012] Source 6 is offset by -7.395407 and 6.470328 pixels which is larger than
2 X fitted extent = 7.186759 x 7.186759, not incorporating fit results
[Sun Jul 15 17:51:01 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:51:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:51:01 2012] Assessing source extent using major
[Sun Jul 15 17:51:01 2012] Source does appear to be extended
[Sun Jul 15 17:51:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 18:08:37 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 18:08:37 2012] Initial guess for spatial extent in simple fitting = 7.82"
[Sun Jul 15 18:08:37 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.901
[Sun Jul 15 18:08:37 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.82"
[Sun Jul 15 18:28:36 2012] fullrun_mos1_xmm0014150401_pi300-10000_cl_pass1_src6.ximg exists
[Sun Jul 15 18:28:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0014150401_pi300-10000_cl_pass1_src6.csv
[Sun Jul 15 18:28:36 2012] fullrun_mos1_xmm0014150401_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Jul 15 18:28:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0014150401_pi300-10000_cl_pass1_src6.csv
[Sun Jul 15 18:28:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0014150401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0014150401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 18:28:36 2012] fullrun_mos1_xmm0014150401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Jul 15 18:28:36 2012] fullrun_mos1_xmm0014150401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Jul 15 18:28:36 2012] Fit fullrun_mos1_xmm0014150401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Jul 15 18:51:08 2012] Spatial fit model total counts = 102.269000, observed total counts = 99.000000
[Sun Jul 15 18:51:08 2012] Offset between fit and detection position for source 6 = 0.430094 pixels
[Sun Jul 15 18:51:08 2012] 104.236500 total counts/ 76.507100 bgd. counts: snr = 3.170221
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.430094 pixels
  Position = (261.2, 305.2) = 17 30 53.21 74 22 18.0
  Extent = 4.2 (2.8-7.4)", rotation angle = 0
  Source counts = 27.7 +/- 10.2
  Background counts = 76.5
  Rate = 0.008 +/- 0.003
[Sun Jul 15 18:51:08 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 18:51:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 18:51:08 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 18:51:08 2012] Source does appear to be extended
[Sun Jul 15 18:51:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 19:02:12 2012] XMMSAS src. selection expression = ellipse(22676.760580, 26502.555800, 251.033407, 251.033407, 0.000000, X, Y)
[Sun Jul 15 19:02:12 2012] Writing source region out to fullrun_mos1_xmm0014150401_pi300-10000_pass1_cl_src6_src.reg
[Sun Jul 15 19:02:12 2012] Extracting stamp from image fullrun_mos1_xmm0014150401_pi300-10000_cl_sm2.00.img.gz, (247, 291) - (276, 320)
[Sun Jul 15 19:02:12 2012] XMMSAS bgd. selection expression = annulus(22676.760580, 26502.555800, 418.389012, 836.778024, X, Y)
[Sun Jul 15 19:02:12 2012] Writing fullrun_mos1_xmm0014150401_pi300-10000_pass1_cl_src6.gif
[Sun Jul 15 19:05:26 2012] Mean detx,y = (1576.68, 22.76) 
[Sun Jul 15 19:05:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 19:05:34 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 19:05:34 2012] Setting source spectrum file to fullrun_mos1_xmm0014150401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jul 15 19:05:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0014150401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jul 15 19:07:21 2012] Not generating rmf since there are only 27 counts
[Sun Jul 15 19:07:21 2012] rmf not generated due to insufficient counts
[Sun Jul 15 19:20:21 2012] Updating aperture counts using extracted products
[Sun Jul 15 19:20:21 2012] Error reading totcts from fullrun_mos1_xmm0014150401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jul 15 19:20:21 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 19:20:21 2012] Using photon index=1.80, rate=0.00799, arf fullrun_mos1_xmm0014150401_pi300-10000_pass1_cl_src6.arf
[Sun Jul 15 19:20:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 19:20:21 2012] Updating source flux to 1e-13
[Sun Jul 15 19:20:22 2012] Flag b found in src. 6 procflags, skipping spectral fitting
[Sun Jul 15 19:20:22 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jul 15 19:20:23 2012] xmm0014150401/analysis//spectral/fullrun_mos1_xmm0014150401_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete