[Sun May 27 10:09:38 2012] Detection parameters:
  Position = (328.3, 319.9) = 18 41 15.00 -4 55 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 635.6 +/- 34.0
  Background counts = 32.7
  Rate = 0.2 +/- 0.008

[Sun May 27 10:09:38 2012] Off-axis axis estimate = 2.67'
[Sun May 27 10:11:19 2012] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Sun May 27 10:11:19 2012] Initial guess for spatial extent in simple fitting = 7.76"
[Sun May 27 10:11:19 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.958
[Sun May 27 10:11:19 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.76"
[Sun May 27 11:54:48 2012] fullrun_pn_xmm0013340201_pi300-10000_cl_pass0_src8.ximg exists
[Sun May 27 11:54:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340201_pi300-10000_cl_pass0_src8.csv
[Sun May 27 11:54:48 2012] fullrun_pn_xmm0013340201_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun May 27 11:54:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340201_pi300-10000_cl_pass0_src8.csv
[Sun May 27 11:54:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0013340201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0013340201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 11:54:48 2012] fullrun_pn_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun May 27 11:54:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun May 27 11:54:48 2012] fullrun_pn_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun May 27 11:54:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun May 27 11:54:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 15:16:12 2012] Source 8 is offset by 7.143422 and 1.636798 pixels which is larger than
2 X fitted extent = 1.573301 x 1.573301, not incorporating fit results
[Sun May 27 15:16:12 2012] Vigneting correction estimate = 1.000000
[Sun May 27 15:16:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 15:16:12 2012] Assessing source extent using major
[Sun May 27 15:16:12 2012] Source does appear to be extended
[Sun May 27 15:16:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 15:16:12 2012] Source is confused with source 6
[Sun May 27 15:16:31 2012] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Sun May 27 15:16:31 2012] Initial guess for spatial extent in simple fitting = 7.76"
[Sun May 27 15:16:31 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.958
[Sun May 27 15:16:31 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.76"
[Sun May 27 16:15:12 2012] fullrun_pn_xmm0013340201_pi300-10000_cl_pass1_src8.ximg exists
[Sun May 27 16:15:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340201_pi300-10000_cl_pass1_src8.csv
[Sun May 27 16:15:12 2012] fullrun_pn_xmm0013340201_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun May 27 16:15:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340201_pi300-10000_cl_pass1_src8.csv
[Sun May 27 16:15:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0013340201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0013340201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 16:15:12 2012] fullrun_pn_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun May 27 16:15:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun May 27 16:15:12 2012] fullrun_pn_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun May 27 16:15:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun May 27 16:15:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 19:36:30 2012] Source 8 is offset by 7.405215 and 2.081195 pixels which is larger than
2 X fitted extent = 2.488009 x 7.072736, not incorporating fit results
[Sun May 27 19:36:30 2012] Vigneting correction estimate = 1.000000
[Sun May 27 19:36:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 19:36:30 2012] Assessing source extent using major
[Sun May 27 19:36:30 2012] Source does appear to be extended
[Sun May 27 19:36:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 19:36:48 2012] XMMSAS src. selection expression = ellipse(28510.837708, 27785.581940, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 27 19:36:48 2012] Writing source region out to fullrun_pn_xmm0013340201_pi300-10000_pass1_cl_src8_src.reg
[Sun May 27 19:36:48 2012] Extracting stamp from image fullrun_pn_xmm0013340201_pi300-10000_cl_sm2.00.img.gz, (291, 282) - (366, 357)
[Sun May 27 19:36:48 2012] XMMSAS bgd. selection expression = annulus(28510.837708, 27785.581940, 1087.500000, 2175.000000, X, Y) && !ellipse(29113.739105, 27008.672577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27075.593920, 26247.605400, 1062.160031, 717.586421, 24.721000, X, Y) && !ellipse(28002.190000, 26096.830600, 1154.136033, 1154.136033, 0.000000, X, Y) && !ellipse(27234.275600, 27542.016000, 1377.849640, 1377.849640, 0.000000, X, Y) && !ellipse(29175.496200, 27303.244000, 1253.896036, 1253.896036, 0.000000, X, Y) && !ellipse(28492.183472, 27181.891998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25864.961520, 27633.639000, 598.235217, 598.235217, 0.000000, X, Y) && !ellipse(28482.450134, 28702.597198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26676.477966, 25447.709167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26764.012000, 28902.849600, 832.824024, 832.824024, 0.000000, X, Y) && !ellipse(29047.158936, 28688.432617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25633.012000, 25857.849600, 832.824024, 832.824024, 0.000000, X, Y) && !ellipse(27289.279968, 25366.473236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26360.574000, 29236.126000, 848.568024, 848.568024, 0.000000, X, Y) && !ellipse(27366.721863, 29784.457916, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 19:36:48 2012] Writing fullrun_pn_xmm0013340201_pi300-10000_pass1_cl_src8.gif
[Sun May 27 19:51:44 2012] Mean detx,y = (1377.75, -519.00) 
[Sun May 27 19:51:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 19:52:04 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 19:52:04 2012] Setting source spectrum file to fullrun_pn_xmm0013340201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun May 27 19:52:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0013340201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon May 28 01:48:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 28 01:48:33 2012] rmf not generated due to insufficient counts
[Mon May 28 04:07:22 2012] Updating aperture counts using extracted products
[Mon May 28 04:07:22 2012] Error reading totcts from fullrun_pn_xmm0013340201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon May 28 04:07:22 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 04:07:22 2012] Using photon index=1.80, rate=0.155, arf fullrun_pn_xmm0013340201_pi300-10000_pass1_cl_src8.arf
[Mon May 28 04:07:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 04:07:22 2012] Updating source flux to 4e-13
[Mon May 28 04:11:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting