[Sun May 27 10:10:26 2012] Detection parameters:
  Position = (325.5, 340.8) = 18 41 15.80 -4 54 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.3 +/- 9.4
  Background counts = 16.9
  Rate = 0.007 +/- 0.002

[Sun May 27 10:10:26 2012] Off-axis axis estimate = 3.64'
[Sun May 27 13:14:45 2012] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting
[Sun May 27 13:14:45 2012] Initial guess for spatial extent in simple fitting = 8.25"
[Sun May 27 13:14:45 2012] source mask rpix=1.9, npix_max = 22, mask sum = 15, frac = 0.653
[Sun May 27 13:14:45 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 8.25"
[Sun May 27 15:16:05 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src28.ximg exists
[Sun May 27 15:16:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src28.csv
[Sun May 27 15:16:05 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun May 27 15:16:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src28.csv
[Sun May 27 15:16:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 15:16:06 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun May 27 15:16:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun May 27 15:16:06 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun May 27 15:16:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun May 27 15:16:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 15:16:23 2012] Source 30 is offset by 1.959716 and 3.304169 pixels which is larger than
2 X fitted extent = 0.942543 x 0.942543, not incorporating fit results
[Sun May 27 15:16:23 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 11.315502 pixels away
[Sun May 27 15:16:23 2012] Vigneting correction estimate = 1.000000
[Sun May 27 15:16:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 15:16:23 2012] Assessing source extent using major
[Sun May 27 15:16:23 2012] Source does appear to be extended
[Sun May 27 15:16:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 15:16:23 2012] Deleting source due to low Poisson probability 0.8