[Sun May 27 10:10:26 2012] Detection parameters:
  Position = (316.5, 343.9) = 18 41 18.43 -4 54 15.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.1 +/- 13.1
  Background counts = 16.1
  Rate = 0.01 +/- 0.002

[Sun May 27 10:10:26 2012] Off-axis axis estimate = 3.54'
[Sun May 27 13:14:45 2012] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting
[Sun May 27 13:14:45 2012] Initial guess for spatial extent in simple fitting = 8.20"
[Sun May 27 13:14:45 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.099
[Sun May 27 13:14:45 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 8.20"
[Sun May 27 15:16:05 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src24.ximg exists
[Sun May 27 15:16:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src24.csv
[Sun May 27 15:16:05 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src24_1.ximg exists
[Sun May 27 15:16:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src24.csv
[Sun May 27 15:16:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 15:16:06 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sun May 27 15:16:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun May 27 15:16:06 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sun May 27 15:16:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun May 27 15:16:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 15:16:23 2012] Source 27 is offset by -2.255397 and 1.668975 pixels which is larger than
2 X fitted extent = 1.796469 x 1.796469, not incorporating fit results
[Sun May 27 15:16:23 2012] Warning, spatial fit 24 centroid is now closest to src. 30
[Sun May 27 15:16:23 2012] Vigneting correction estimate = 1.000000
[Sun May 27 15:16:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 15:16:23 2012] Assessing source extent using major
[Sun May 27 15:16:23 2012] Source does appear to be extended
[Sun May 27 15:16:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 17:53:43 2012] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting
[Sun May 27 17:53:43 2012] Initial guess for spatial extent in simple fitting = 8.20"
[Sun May 27 17:53:43 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.099
[Sun May 27 17:53:43 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 8.20"
[Sun May 27 19:36:25 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_src22.ximg exists
[Sun May 27 19:36:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_src22.csv
[Sun May 27 19:36:25 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun May 27 19:36:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_src22.csv
[Sun May 27 19:36:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 19:36:26 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun May 27 19:36:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun May 27 19:36:26 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun May 27 19:36:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun May 27 19:36:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 19:36:40 2012] Source 27 is offset by -2.287512 and 1.668975 pixels which is larger than
2 X fitted extent = 2.071030 x 2.071030, not incorporating fit results
[Sun May 27 19:36:40 2012] Spatial fit model total counts = 569.894000, observed total counts = 497.000000
[Sun May 27 19:36:40 2012] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 27 19:36:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 19:36:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 19:36:40 2012] Assessing source extent using major
[Sun May 27 19:36:40 2012] Source does appear to be extended
[Sun May 27 19:36:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 03:19:06 2012] XMMSAS src. selection expression = ellipse(27484.456482, 29867.148804, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 03:19:06 2012] Writing source region out to fullrun_mos2_xmm0013340201_pi300-10000_pass1_cl_src27_src.reg
[Mon May 28 03:19:06 2012] Extracting stamp from image fullrun_mos2_xmm0013340201_pi300-10000_cl_sm2.00.img.gz, (279, 306) - (354, 381)
[Mon May 28 03:19:06 2012] XMMSAS bgd. selection expression = annulus(27484.456482, 29867.148804, 1087.500000, 2175.000000, X, Y) && !ellipse(27219.075200, 27538.583200, 449.089613, 449.089613, 0.000000, X, Y) && !ellipse(29090.742060, 27020.698000, 1276.192037, 1276.192037, 0.000000, X, Y) && !ellipse(25797.434000, 27452.384000, 413.572812, 413.572812, 0.000000, X, Y) && !ellipse(29213.856400, 27496.804000, 816.896024, 816.896024, 0.000000, X, Y) && !ellipse(28492.090546, 27272.303711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25942.883200, 27455.951400, 1131.304033, 500.380814, 1.640000, X, Y) && !ellipse(28525.259827, 27874.875885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25080.046360, 27997.131000, 651.366419, 651.366419, 0.000000, X, Y) && !ellipse(28441.987488, 28736.369171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27188.160522, 28997.979828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25617.520000, 27221.368000, 2172.008062, 2172.008062, 0.000000, X, Y) && !ellipse(25238.965454, 28473.661987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25985.888000, 29788.480000, 1140.400033, 1140.400033, 0.000000, X, Y) && !ellipse(28905.882172, 29257.583282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.168000, 26856.700000, 1132.664033, 1049.128030, 351.737000, X, Y)
[Mon May 28 03:19:06 2012] Writing fullrun_mos2_xmm0013340201_pi300-10000_pass1_cl_src27.gif
[Mon May 28 03:21:45 2012] Mean detx,y = (54.13, 2337.57) 
[Mon May 28 03:21:45 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:21:50 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:21:50 2012] Setting source spectrum file to fullrun_mos2_xmm0013340201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon May 28 03:21:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0013340201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Mon May 28 04:06:58 2012] Not generating rmf since there are only 82 counts
[Mon May 28 04:06:58 2012] rmf not generated due to insufficient counts
[Mon May 28 04:07:23 2012] Updating aperture counts using extracted products
[Mon May 28 04:07:23 2012] Error reading totcts from fullrun_mos2_xmm0013340201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon May 28 04:07:24 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 04:07:24 2012] Using photon index=1.80, rate=0.0145, arf fullrun_mos2_xmm0013340201_pi300-10000_pass1_cl_src27.arf
[Mon May 28 04:07:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 04:07:24 2012] Updating source flux to 1.5e-13
[Mon May 28 04:09:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting