[Sun May 27 10:10:26 2012] Detection parameters:
  Position = (303.2, 337.8) = 18 41 22.30 -4 54 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.0 +/- 14.7
  Background counts = 16.6
  Rate = 0.02 +/- 0.003

[Sun May 27 10:10:26 2012] Off-axis axis estimate = 2.88'
[Sun May 27 13:14:45 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Sun May 27 13:14:45 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Sun May 27 13:14:45 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.751
[Sun May 27 13:14:45 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.87"
[Sun May 27 15:16:05 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src23.ximg exists
[Sun May 27 15:16:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src23.csv
[Sun May 27 15:16:05 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun May 27 15:16:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src23.csv
[Sun May 27 15:16:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 15:16:06 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun May 27 15:16:06 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun May 27 15:16:06 2012] Fit fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun May 27 15:16:23 2012] Spatial fit model total counts = 721.845000, observed total counts = 742.000000
[Sun May 27 15:16:23 2012] Offset between fit and detection position for source 23 = 6.444636 pixels
[Sun May 27 15:16:23 2012] 666.129000 total counts/ 436.149000 bgd. counts: snr = 11.012163
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 6.444636 pixels
  Position = (299.2, 343.0) = 18 41 23.44 -4 54 19.8
  Extent = 14.3 (14.3-14.3)", rotation angle = 0
  Source counts = 230.0 +/- 25.8
  Background counts = 436.1
  Rate = 0.04 +/- 0.004
[Sun May 27 15:16:23 2012] Vigneting correction estimate = 1.000000
[Sun May 27 15:16:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 15:16:23 2012] Assessing source extent using major axis lower bound
[Sun May 27 15:16:23 2012] Source does appear to be extended
[Sun May 27 15:16:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 17:53:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 17:53:43 2012] Initial guess for spatial extent in simple fitting = 14.26"
[Sun May 27 17:53:43 2012] source mask rpix=3.3, npix_max = 57, mask sum = 55, frac = 0.964
[Sun May 27 17:53:43 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 14.26"
[Sun May 27 19:36:25 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_src21.ximg exists
[Sun May 27 19:36:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_src21.csv
[Sun May 27 19:36:25 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun May 27 19:36:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_src21.csv
[Sun May 27 19:36:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 19:36:26 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun May 27 19:36:26 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun May 27 19:36:26 2012] Fit fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun May 27 19:36:40 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 14.289726 pixels away
[Sun May 27 19:36:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 19:36:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 19:36:40 2012] Assessing source extent using major axis lower bound
[Sun May 27 19:36:40 2012] Source does appear to be extended
[Sun May 27 19:36:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 03:19:06 2012] XMMSAS src. selection expression = ellipse(25985.888000, 29788.480000, 855.300025, 855.300025, 0.000000, X, Y)
[Mon May 28 03:19:06 2012] Writing source region out to fullrun_mos2_xmm0013340201_pi300-10000_pass1_cl_src23_src.reg
[Mon May 28 03:19:06 2012] Extracting stamp from image fullrun_mos2_xmm0013340201_pi300-10000_cl_sm2.00.img.gz, (250, 294) - (348, 392)
[Mon May 28 03:19:06 2012] XMMSAS bgd. selection expression = annulus(25985.888000, 29788.480000, 1425.500041, 2851.000082, X, Y) && !ellipse(27219.075200, 27538.583200, 449.089613, 449.089613, 0.000000, X, Y) && !ellipse(27132.424400, 26257.362200, 1115.488032, 1115.488032, 0.000000, X, Y) && !ellipse(29090.742060, 27020.698000, 1276.192037, 1276.192037, 0.000000, X, Y) && !ellipse(25797.434000, 27452.384000, 413.572812, 413.572812, 0.000000, X, Y) && !ellipse(29213.856400, 27496.804000, 816.896024, 816.896024, 0.000000, X, Y) && !ellipse(28054.803600, 25965.828000, 1189.008034, 1189.008034, 0.000000, X, Y) && !ellipse(28492.090546, 27272.303711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25942.883200, 27455.951400, 1131.304033, 500.380814, 1.640000, X, Y) && !ellipse(26308.243988, 26750.324951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28525.259827, 27874.875885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28150.708000, 25938.044000, 1165.088034, 1165.088034, 0.000000, X, Y) && !ellipse(25080.046360, 27997.131000, 651.366419, 651.366419, 0.000000, X, Y) && !ellipse(28441.987488, 28736.369171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27188.160522, 28997.979828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25617.520000, 27221.368000, 2172.008062, 2172.008062, 0.000000, X, Y) && !ellipse(25238.965454, 28473.661987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27484.456482, 29867.148804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28905.882172, 29257.583282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.168000, 26856.700000, 1132.664033, 1049.128030, 351.737000, X, Y)
[Mon May 28 03:19:06 2012] Writing fullrun_mos2_xmm0013340201_pi300-10000_pass1_cl_src23.gif
[Mon May 28 03:21:37 2012] Mean detx,y = (1338.33, 2036.60) 
[Mon May 28 03:21:37 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:21:43 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:21:43 2012] Setting source spectrum file to fullrun_mos2_xmm0013340201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon May 28 03:21:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0013340201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Mon May 28 04:07:23 2012] Updating aperture counts using extracted products
[Mon May 28 04:07:23 2012] Error reading totcts from fullrun_mos2_xmm0013340201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon May 28 04:07:24 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 04:07:24 2012] Using photon index=1.80, rate=0.0361, arf fullrun_mos2_xmm0013340201_pi300-10000_pass1_cl_src23.arf
[Mon May 28 04:07:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 04:07:24 2012] Updating source flux to 3.7e-13