[Sun May 27 10:10:26 2012] Detection parameters:
  Position = (290.7, 327.8) = 18 41 25.94 -4 55 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.2 +/- 15.6
  Background counts = 15.1
  Rate = 0.02 +/- 0.003

[Sun May 27 10:10:26 2012] Off-axis axis estimate = 2.21'
[Sun May 27 13:14:45 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Sun May 27 13:14:45 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Sun May 27 13:14:45 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.004
[Sun May 27 13:14:45 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.53"
[Sun May 27 15:16:05 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src21.ximg exists
[Sun May 27 15:16:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src21.csv
[Sun May 27 15:16:05 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun May 27 15:16:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src21.csv
[Sun May 27 15:16:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 15:16:06 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun May 27 15:16:06 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun May 27 15:16:06 2012] Fit fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun May 27 15:16:23 2012] Warning, spatial fit 21 centroid is now closest to src. 28
[Sun May 27 15:16:23 2012] Vigneting correction estimate = 1.000000
[Sun May 27 15:16:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 15:16:23 2012] Assessing source extent using major
[Sun May 27 15:16:23 2012] Source does appear to be extended
[Sun May 27 15:16:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 15:16:23 2012] Source is confused with source 10
[Sun May 27 17:53:43 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Sun May 27 17:53:43 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Sun May 27 17:53:43 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.004
[Sun May 27 17:53:43 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 7.53"
[Sun May 27 19:36:25 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_src19.ximg exists
[Sun May 27 19:36:25 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun May 27 19:36:25 2012] Fit fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_src19 appears to have run properly
[Sun May 27 19:36:26 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun May 27 19:36:26 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun May 27 19:36:26 2012] Fit fullrun_mos2_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sun May 27 19:36:40 2012] Source 18 is offset by 1.371718 and 5.123287 pixels which is larger than
2 X fitted extent = 4.461779 x 4.461779, not incorporating fit results
[Sun May 27 19:36:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 19:36:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 19:36:40 2012] Assessing source extent using major
[Sun May 27 19:36:40 2012] Source does appear to be extended
[Sun May 27 19:36:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 03:19:05 2012] XMMSAS src. selection expression = ellipse(25238.965454, 28473.661987, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 03:19:05 2012] Writing source region out to fullrun_mos2_xmm0013340201_pi300-10000_pass1_cl_src18_src.reg
[Mon May 28 03:19:05 2012] Extracting stamp from image fullrun_mos2_xmm0013340201_pi300-10000_cl_sm2.00.img.gz, (253, 290) - (328, 365)
[Mon May 28 03:19:05 2012] XMMSAS bgd. selection expression = annulus(25238.965454, 28473.661987, 1087.500000, 2175.000000, X, Y) && !ellipse(27219.075200, 27538.583200, 449.089613, 449.089613, 0.000000, X, Y) && !ellipse(27132.424400, 26257.362200, 1115.488032, 1115.488032, 0.000000, X, Y) && !ellipse(25797.434000, 27452.384000, 413.572812, 413.572812, 0.000000, X, Y) && !ellipse(28054.803600, 25965.828000, 1189.008034, 1189.008034, 0.000000, X, Y) && !ellipse(25942.883200, 27455.951400, 1131.304033, 500.380814, 1.640000, X, Y) && !ellipse(26308.243988, 26750.324951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28150.708000, 25938.044000, 1165.088034, 1165.088034, 0.000000, X, Y) && !ellipse(25080.046360, 27997.131000, 651.366419, 651.366419, 0.000000, X, Y) && !ellipse(27180.410492, 25449.283600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25877.376200, 25675.463200, 798.040023, 798.040023, 0.000000, X, Y) && !ellipse(27188.160522, 28997.979828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25617.520000, 27221.368000, 2172.008062, 2172.008062, 0.000000, X, Y) && !ellipse(25985.888000, 29788.480000, 1140.400033, 1140.400033, 0.000000, X, Y) && !ellipse(27484.456482, 29867.148804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.168000, 26856.700000, 1132.664033, 1049.128030, 351.737000, X, Y)
[Mon May 28 03:19:05 2012] Writing fullrun_mos2_xmm0013340201_pi300-10000_pass1_cl_src18.gif
[Mon May 28 03:21:23 2012] Mean detx,y = (2051.04, 702.95) 
[Mon May 28 03:21:24 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:21:28 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:21:28 2012] Setting source spectrum file to fullrun_mos2_xmm0013340201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon May 28 03:21:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0013340201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon May 28 04:01:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 28 04:01:10 2012] rmf not generated due to insufficient counts
[Mon May 28 04:07:23 2012] Updating aperture counts using extracted products
[Mon May 28 04:07:23 2012] Error reading totcts from fullrun_mos2_xmm0013340201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon May 28 04:07:24 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 04:07:24 2012] Using photon index=1.80, rate=0.0202, arf fullrun_mos2_xmm0013340201_pi300-10000_pass1_cl_src18.arf
[Mon May 28 04:07:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 04:07:24 2012] Updating source flux to 2.1e-13
[Mon May 28 04:09:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting