[Sun May 27 10:10:26 2012] Detection parameters:
  Position = (293.0, 300.1) = 18 41 25.26 -4 57 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 194.7 +/- 18.6
  Background counts = 14.6
  Rate = 0.03 +/- 0.003

[Sun May 27 10:10:26 2012] Off-axis axis estimate = 0.41'
[Sun May 27 13:14:45 2012] Using EEF radius (= 6.63 ")to estimate initial spatial extent for simple fitting
[Sun May 27 13:14:45 2012] Initial guess for spatial extent in simple fitting = 6.63"
[Sun May 27 13:14:45 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.975
[Sun May 27 13:14:45 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 6.63"
[Sun May 27 15:16:05 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src17.ximg exists
[Sun May 27 15:16:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src17.csv
[Sun May 27 15:16:05 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun May 27 15:16:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src17.csv
[Sun May 27 15:16:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 15:16:06 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun May 27 15:16:06 2012] fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun May 27 15:16:06 2012] Fit fullrun_mos2_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sun May 27 15:16:23 2012] Spatial fit model total counts = 1017.630000, observed total counts = 1019.000000
[Sun May 27 15:16:23 2012] Offset between fit and detection position for source 15 = 0.872841 pixels
[Sun May 27 15:16:23 2012] 1044.980800 total counts/ 1003.660000 bgd. counts: snr = 1.304294
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.872841 pixels
  Position = (292.3, 300.6) = 18 41 25.47 -4 57 24.1
  Extent = 3.6 (2.6-5.5)", rotation angle = 0
  Source counts = 41.3 +/- 32.3
  Background counts = 1003.7
  Rate = 0.006 +/- 0.005
  Deleting source due to low Poisson probability