[Sun May 27 10:09:59 2012] Detection parameters:
  Position = (303.7, 316.0) = 18 41 22.15 -4 56 16.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 508.1 +/- 30.8
  Background counts = 19.5
  Rate = 0.08 +/- 0.005

[Sun May 27 10:10:00 2012] Off-axis axis estimate = 1.33'
[Sun May 27 11:54:49 2012] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Sun May 27 11:54:49 2012] Initial guess for spatial extent in simple fitting = 7.09"
[Sun May 27 11:54:49 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.881
[Sun May 27 11:54:49 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.09"
[Sun May 27 13:14:44 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src4.ximg exists
[Sun May 27 13:14:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src4.csv
[Sun May 27 13:14:44 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun May 27 13:14:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src4.csv
[Sun May 27 13:14:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 13:14:45 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun May 27 13:14:45 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun May 27 13:14:45 2012] Fit fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun May 27 15:16:17 2012] Warning, spatial fit 4 centroid is now closest to src. 4
[Sun May 27 15:16:17 2012] Vigneting correction estimate = 1.000000
[Sun May 27 15:16:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 15:16:17 2012] Assessing source extent using major
[Sun May 27 15:16:17 2012] Source does appear to be extended
[Sun May 27 15:16:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 15:16:17 2012] Source is confused with source 4
[Sun May 27 16:15:12 2012] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Sun May 27 16:15:12 2012] Initial guess for spatial extent in simple fitting = 7.09"
[Sun May 27 16:15:12 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.881
[Sun May 27 16:15:12 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.09"
[Sun May 27 17:53:42 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_src4.ximg exists
[Sun May 27 17:53:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_src4.csv
[Sun May 27 17:53:42 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun May 27 17:53:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_src4.csv
[Sun May 27 17:53:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 17:53:42 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun May 27 17:53:42 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun May 27 17:53:42 2012] Fit fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun May 27 19:36:35 2012] Spatial fit model total counts = 2877.470000, observed total counts = 2867.000000
[Sun May 27 19:36:35 2012] Offset between fit and detection position for source 8 = 5.847628 pixels
[Sun May 27 19:36:35 2012] 2775.628000 total counts/ 2257.870000 bgd. counts: snr = 10.896257
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 5.847628 pixels
  Position = (309.5, 315.5) = 18 41 20.45 -4 56 19.1
  Extent = 14.2 (14.1-28.4)", rotation angle = 0
  Source counts = 517.8 +/- 52.7
  Background counts = 2257.9
  Rate = 0.08 +/- 0.008
[Sun May 27 19:36:35 2012] Source 8 is offset by -3.756644 and -1.737343 pixels which is larger than
2 X fitted extent = 2.791825 x 2.791825, not incorporating fit results
[Sun May 27 19:36:35 2012] Spatial fit model total counts = 4262.780000, observed total counts = 4270.000000
[Sun May 27 19:36:35 2012] Offset between fit and detection position for source 8 = 1.898709 pixels
[Sun May 27 19:36:35 2012] Warning, changing simple spatial fit ID from 4 to 14
[Sun May 27 19:36:35 2012] 4091.043000 total counts/ 3104.610000 bgd. counts: snr = 17.703701
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.898709 pixels
  Position = (311.2, 314.6) = 18 41 19.97 -4 56 23.1
  Extent = 10.3 (10.1-11.0)", rotation angle = 0
  Source counts = 986.4 +/- 64.0
  Background counts = 3104.6
  Rate = 0.2 +/- 0.01
[Sun May 27 19:36:35 2012] Vigneting correction estimate = 1.000000
[Sun May 27 19:36:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 19:36:35 2012] Assessing source extent using major axis lower bound
[Sun May 27 19:36:35 2012] Source does appear to be extended
[Sun May 27 19:36:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:07:56 2012] XMMSAS src. selection expression = ellipse(27024.098000, 27321.276000, 618.240018, 618.240018, 0.000000, X, Y)
[Mon May 28 02:07:56 2012] Writing source region out to fullrun_mos1_xmm0013340201_pi300-10000_pass1_cl_src8_src.reg
[Mon May 28 02:07:56 2012] Extracting stamp from image fullrun_mos1_xmm0013340201_pi300-10000_cl_sm2.00.img.gz, (276, 279) - (347, 350)
[Mon May 28 02:07:56 2012] XMMSAS bgd. selection expression = annulus(27024.098000, 27321.276000, 1030.400030, 2060.800059, X, Y) && !ellipse(27225.322800, 27530.000800, 449.304813, 449.304813, 0.000000, X, Y) && !ellipse(27244.624000, 26130.652440, 2320.464067, 2320.464067, 0.000000, X, Y) && !ellipse(29126.688800, 27198.273200, 1091.104031, 1091.104031, 0.000000, X, Y) && !ellipse(29187.798000, 26870.104000, 1226.592035, 1226.592035, 0.000000, X, Y) && !ellipse(25856.792000, 27628.644000, 538.777616, 538.777616, 0.000000, X, Y) && !ellipse(28562.711670, 27262.819946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28424.071350, 28036.569824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28103.892000, 25947.664000, 1200.728035, 1200.728035, 0.000000, X, Y) && !ellipse(27181.922400, 25366.380900, 1172.584034, 1172.584034, 0.000000, X, Y) && !ellipse(26336.182200, 28393.898000, 1231.208035, 1231.208035, 0.000000, X, Y) && !ellipse(25602.502000, 26029.558000, 1319.864038, 303.367209, 220.695000, X, Y) && !ellipse(28222.324000, 28535.598000, 1253.224036, 1253.224036, 0.000000, X, Y) && !ellipse(26150.269745, 25711.109314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25409.253400, 26253.168000, 931.944027, 931.944027, 0.000000, X, Y) && !ellipse(29039.600000, 28430.320000, 1332.360038, 1332.360038, 0.000000, X, Y) && !ellipse(27209.418000, 29849.160000, 1272.720037, 1272.720037, 0.000000, X, Y) && !ellipse(29277.527863, 28991.445801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27779.217834, 29439.590851, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 02:07:56 2012] Writing fullrun_mos1_xmm0013340201_pi300-10000_pass1_cl_src8.gif
[Mon May 28 02:08:38 2012] Mean detx,y = (254.78, -270.82) 
[Mon May 28 02:08:39 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 02:08:45 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 02:08:45 2012] Setting source spectrum file to fullrun_mos1_xmm0013340201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon May 28 02:08:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0013340201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon May 28 04:07:23 2012] Updating aperture counts using extracted products
[Mon May 28 04:07:23 2012] Error reading totcts from fullrun_mos1_xmm0013340201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon May 28 04:07:23 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 04:07:23 2012] Using photon index=1.80, rate=0.155, arf fullrun_mos1_xmm0013340201_pi300-10000_pass1_cl_src8.arf
[Mon May 28 04:07:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 04:07:23 2012] Updating source flux to 1.6e-12
[Mon May 28 04:07:25 2012] Flag b found in src. 8 procflags, skipping spectral fitting
[Mon May 28 04:07:25 2012] Flag c found in src. 8 procflags, skipping spectral fitting